Sraigtinis kompresorius ZR160FF

Atlas Copco ZR160FF

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, model 4060D, including: 2. Machine data: - NC 4060 D (duplex with 6 abrasive cutting heads) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical data: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control features • 15-inch color flat-screen monitor (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal softkey bar • Slim QWERTY control panel • 40 GB program storage (hard drive) • 2 MB RAM for part programs • Operating system Windows 2000/XP Crjdpfxexgumco Abxjc • Handheld remote for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on brackets (2 x 3) – 6 x SM 3000 abrasive dosing units – 1 x IGEMS Standard or Professional license – 1 x documentation – 2 x abrasive containers, each 1,500 l – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless steel catch tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connection: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Būklė: geras (naudotas), Gamybos metai: 2003, Megamat Tipas: FSE 3.5 2448/816-3785 Įrenginio Nr.: 35.0070 Pagaminimo metai: 2003 Įrenginio aukštis: apie 3785 mm Codpeytgbgefx Abxerc Įrenginio plotis: apie 2640 mm Įrenginio gylis: apie 2710 mm Padėklų skaičius: 20 Padėklo plotis: apie 2240 mm Padėklo gylis: apie 820 mm Padėklo aukštis: apie 55 mm Skyriaus apkrova: 307 kg Bendra apkrova: 70 000 kg Spalva: balta

Būklė: naudotas, Gamybos metai: 2022, veikimo valandos: 12 031 h, Funkcionalumas: nepatikrintas, Kaeser CSDX140SFC sraigtinis oro kompresorius 140 kW, 8,5 bar Darbo valandos: 12 031 Darbo su apkrova valandos: 10 642 Cedpfx Abjy Duxcexerc Kompresorius šiuo metu sandėliuojamas – nuotraukos darytos prieš išvežimą.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, ATLAS COPCO GA37 Screw Compressor 37 kW 2011 ATLAS COPCO GA37 screw compressor, machine after service Technical specifications: Capacity: 6.30 m³/min Motor power: 37 kW Maximum pressure: 8 bar Year of manufacture: 2011 Operating hours: 3,431 h Credpfxei D Ef Hj Abxsc The compressor is fully functional, ready for operation, guaranteed. Service support provided.

Būklė: geras (naudotas), Gamybos metai: 2009, Megamat FSE keltuvas Tipas: FSE 7.1 2448/612-4260 Prietaiso nr.: 500002883 Pagaminimo metai: 2009 Prietaiso aukštis: apie 4260 mm Prietaiso plotis: apie 2850 mm Cedpfx Aeyxyxqsbxerc Prietaiso gylis: apie 2400 mm Lentynų skaičius: 33 Lentynos plotis: apie 2670 mm Lentynos gylis: apie 816 mm Maksimali lentynos apkrova: 400 kg Bendra apkrova: 70 000 kg Spalva: smėlio

Būklė: naudotas, Gamybos metai: 2010, veikimo valandos: 10 409 h, Funkcionalumas: visiškai funkcionalus, darbo diapazonas: 2 000 mm, X ašies eiga: 4 000 mm, Y ašies eiga: 2 000 mm, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, slėgis: 6 000 juosta, darbinis slėgis: 6 000 juosta, įėjimo srovė: 120 A, padavimo ilgis X ašis: 4 000 mm, padavimo eiga Y ašimi: 2 000 mm, paskutinio kapitalinio remonto metai: 2026, vandens slėgis: 6 000 juosta, siurblio slėgis: 6 000 juosta, darbinis ilgis: 4 000 mm, įėjimo dažnis: 50 Hz, We are offering this used Flow FLOW Mach 4 4020b waterjet cutting system, year of manufacture 2010. Dynamic XD | 100 HP HyperJet | NEW drive retrofit 2026 Manufacturer: Flow Model: FLOW Mach 4 4020b Year of manufacture: 2010 Machine Description For sale is a high-performance, recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the standard 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. Special highlight for buyers: In January 2026, the manufacturer (Flow Europe GmbH) carried out comprehensive technical service. As part of this, an official drive controller retrofit kit was installed (approx. €18,000 incl. installation). As original replacement controllers for this year are often no longer available, this upgrade provides long-term spare parts availability and modernized electronic control. A test cut was successfully performed after the retrofit. Technical Data - Manufacturer: Flow International Corporation - Model: Mach 4 4020b - Year of manufacture: 2010 (Service & electronics upgrade 01/2026) - Working area: approx. 4,000 mm x 2,000 mm - Cutting head: Dynamic XD (5-axis technology with angular error compensation), used by us exclusively for angle correction - Abrasive system: Flow Paser 4 - High-pressure pump: Flow HyperJet 100 (94iD) - Max. operating pressure: 6,000 bar (87,000 PSI) - Pump power: 100 HP / 75 kW - Operating hours (pump): approx. 10,409 h - Control software: FlowMaster / FlowCUT 7.0 - Electrical connection: 400V, 50Hz, 3 phase (120A full load) Condition & Equipment - Technical condition: immediately ready for use. - Maintenance history: Latest technical service report from the manufacturer available (January 2026). - Upgrades: New drive controllers (retrofit kit) and overhauled C-axis wiring. - Productivity: 6,000-bar technology enables up to 50% faster cuts compared to standard systems. Inspection & Processing - The system is still connected and can be visited and demonstrated under power. - Location: 78549 Spaichingen (Baden-Württemberg, Germany) - Inspection possible by appointment at short notice. Scope of Delivery - Flow Mach 4 4020b waterjet cutting system - HyperJet 100 high-pressure pump - Control terminal incl. software - Technical acceptance protocol / service report from 01/2026 Crsdpfx Aboywtitexjc - Abrasive system: Flow Paser 4 Legal (B2B): Sale to commercial customers only, excluding warranty, liability for material defects and returns. Sold as seen/tested. All information subject to change, errors excepted. Subject to prior sale. If you have any questions or require more information, feel free to send us a message or call us.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, bendras svoris: 1 000 kg, tūrio srautas: 425,4 m³/val, slėgis (maks.): 7,5 juosta, Įranga: Tipinė plokštelė prieinama, PROD. - ATLASCOPCO MODEL - GA37 PLUS S/N - API510029 YEAR - 2006 POWER (kW) - 37 CAPACITY (m³/min) - 7.09 PRESSURE (bar) - 7.5 HOURS (DOC/TOTAL) - 6043 FREQUENCY INVERTER - no Codpfxjrz Rtbj Abxerc BUILT-IN DRYER - no COOLING (AIR/WATER) - air ON TANK - no NEW/USED - USED

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 59 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S15085092, X ašies eiga: 1 500 mm, Y ašies eiga: 800 mm, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, slėgis: 2 000 juosta, Vandens srovės pjovimo staklės, 1500x800 mm formato, naujai įrengtos gamintojo 2023 m. liepos mėn. Labai mažai naudotos (mažiau nei 60 val.). Galima pirkėjui suteikti kreditą. Crodpfxsyprq Eo Abxsc

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: API502813, bendras svoris: 970 kg, tūrio srautas: 280,8 m³/val, slėgis (maks.): 13 juosta, aušinimo tipas: oras, Įranga: Tipinė plokštelė prieinama, We offer: ATLAS COPCO GA37 Technical data: S/N: API502813 Year: 2005 Power (kW): 37 Output (m³/min): 4.5 Pressure (bar): 13 Operating hours (total/documented): 95,183 Inverter: no Built-in dryer: no Heat exchanger: no Crsdpfx Absv Hqkujxjc Cooling (air/water): air Mounted on receiver: no Documentation: no Connections: 2'' and 1 1/2'' S014585

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, stalo ilgis: 3 500 mm, stalo plotis: 1 500 mm, Water Jet Sweden NC 3515 D 5-axis Photos show the current condition - Two Z-axes - 1 x 45° cutting head, 1 x 2D - Control system will be renewed - To be sandblasted and newly painted - Pump optionally available - Available 12-16 weeks after order Special features: - Customizable according to customer requirements - 12 months or 2,000 operating hours warranty (excluding spare and wear parts) A discount is offered when signing a maintenance or service contract! Contact us for your tailor-made offer! Crsdpfx Ajnab Rzjbxjc