Alyvos įpurškimo rotacinis sraigtinis kompresorius su integruotu šaltnešio džiovintuvu ATLAS COPCO G

ATLAS COPCO GA15 FF

Gamybos metai: 2020, Sąlyga: paruoštas naudoti (naudotas), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigerated air dryers, and an oil-water separation system (Beko, also by Atlas Copco), is available. 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery rate: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow rate: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant quantity: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. Hnjdpfx Afoxdc Uvj Ieg 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, controls: 2-6 compressors. 5) Oil-water separation system Beko ÖWAMAT 15, flow capacity range: 6 m³-30 m³/min, oil outlet: DN40, tank volume: 115.5 l, fill volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible.

Sąlyga: naudotas, Gamybos metai: 2017, veikimo valandos: 20 000 h, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: GA11VSD+FF, Compressed Air System Atlas Copco Hedpfx Afjvx Nmfs Iong Consisting of: GA18 Plus Compressor, year 2007 GA11VSD+FF Compressor, year 2017 ES 6 Control Unit Buyer is responsible for proper professional disassembly. Forklift will be provided.

Gamybos metai: 2000, Sąlyga: paruoštas naudoti (naudotas), Operating pressure: 7.75 bar, air flow rate: 40.4 l/s, power: 15 kW, speed: 3,000 rpm, machine weight: approx. 450 kg. An on-site inspection is possible. Hnedpfx Ajwfg Hhjf Iog

Sąlyga: geras (naudotas), HURON MU4 Milling Machine Table surface 1450 x 460 mm Hodpeu Hifzefx Af Isng 5 T-slots 16 mm Longitudinal travel 1,300 mm Cross travel 700 mm Vertical travel 500 mm Spindle taper ISO 40 27 spindle speeds 30 to 2,066 rpm Rapid traverse 2,800 mm/min Maximum table load 1,500 kg Maximum clearance under head 530 mm Spindle motor 8.8 kW Feed motor 3.5 HP Coolant pump power 1.6 HP Overall dimensions (L x W x H) 2,000 x 2,000 mm Approximate weight 4 tonnes

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 302827, Federhenn Profilbearbeitungszentrum (Bohren und Fräsen) SBZ 100G – Hnodpfx Afjwnpa No Isg ZUM VERKAUF IM VERBUND MIT 1 SCHIRMER NC-SÄGE 1000-G4 BAUJAHR 2014 (KOMPLETTE LINIE), SIEHE SCHIRMER-ANZEIGE...!! NC-Zuführeinheit mit Greifer, max. 200 m/min – max. Profilänge 3.500 mm. Der Greifer ist pneumatisch in 2 Achsen verstellbar, zur Anpassung an unterschiedliche Profilgeometrien. Bearbeitungsstation als G-Modul gestaltet, mit 2 Servoachsen in Y- und Z-Richtung. Ausgelegt für die Aufnahme von bis zu 14 Bearbeitungseinheiten zur Komplettbearbeitung von PVC-, Rahmen-, Pfosten- und Flügelprofilen – Ausförderer mit Tisch 2.500 x 1.500 mm. PC-Steuerung C 6140, Display, Software SBZ 100G, SPS+NC. Modem-Ferndiagnose. Belademagazin mit 9 Plätzen (9 Profile à 3.500 mm), geeignet für Rahmenprofile mit max. 127 mm Breite. Barcodescanner – Horizontalförderband mit 9 frei einstellbaren Transportbalken. 18 m/min – 3.000 x 2.400 mm – Bearbeitungseinheiten: Schraubeinheit, 2 x Bohreinheit für Dübel- oder Pfostenlöcher, 2 x Bohreinheit für Befestigungslöcher mit 16.750 U/min, 2 x Zusatzbearbeitungen (Markierung des Schließteils), Bohreinheit für Haustürbeschläge (nach innen öffnend), Bohreinheit für Olivenlochbohrung (3-sp.) Fräseinheit Schlosskasten. 2 Stk. Fräseinheit zum Fräsen und Bohren von Entwässerungs- und Lüftungsschlitzen, 1 davon schräg angeordnet. 1 Schwenkvorrichtung (MD- und AD-Fenstersysteme). Fräseinheit für PZ- und Grifflochmusterfräsung.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2013, Grafisk Maskinfabrik opruller/omskærer Hjdpfjipvhnsx Af Ieng

Sąlyga: naujas, Delivery pressure 10 bar effective delivery rate 252 L/min Tank capacity 90 l / bar Number of cylinders 1 pc. Hnjdovkiztopfx Af Ieg Motor 400 Volt / 1.5 kW V / kW Speed 777 rpm Machine weight approx. 70 kg Dimensions (L x W x H) 0.97 x 0.5 x 0.9 m

Gamybos metai: 2001, veikimo valandos: 123 h, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 123, Chip silo, diameter: 5 m, height: approx. 8 m, net capacity: 42 m³. Suitable for the storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time, by prior arrangement. Hnsdpfx Afeftdv Ue Ieg

Sąlyga: naudotas, Gamybos metai: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has been professionally dismantled, and is stored in a warehouse. Technical Details Hsdperkgy Ujfx Af Iong - Output: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for mould shells - Number of heating modules: 10 - Neck finish: 29/25 - Operating hours: 47,000 - The machine has been serviced regularly Machine equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blow wheel for 6 cavities - Sidel control cabinet - Sidel PCC drive & control panel - Comprehensive spare parts list available on request

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras svoris: 1 240 kg, kuro tipas: dyzelinas, bakelio talpa: 135 l, spalva: balta, išėjimo srovė: 130 A, išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 34 kW (46,23 AG), nuolatinė galia: 30 kW (40,79 AG), bendras ilgis: 2 200 mm, bendras plotis: 950 mm, bendras aukštis: 1 230 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: Deutz, Cummins, Ricardo, aušinimo tipas: vanduo, įvesties srovės tipas: trifazis, Three-phase stationary generator set Proton ZPP 30R (30kW - 34kW) in a compact, weather-resistant and additionally sound-insulated enclosure. The genset features an external Automatic Transfer Switch (ATS/Autostart) system as well as many other functions, detailed further in the description. • Model – Proton ZPP 30R SZR • Maximum power output – 34,000 Watts (34kW / 40 kVA) • Rated power – 30,000 Watts (30kW / 36 kVA) • Ready for operation – Yes • Type – Industrial generator set • Condition – Brand new • Manufacturer – Proton • Generator set type – Three-phase • VAT invoice 23% • Year of manufacture – 2024 • Warranty – 36 months ⊳ ENGINE: Engine model – Ricardo MN4100ZDS Fuel type – Diesel Fuel consumption: - 6.5 liters per hour (at 75% load) - 5.0 liters per hour (at 50% load) Engine configuration – Inline (R4) Displacement – 4100 cc Direct injection Lubrication system – Forced lubrication with oil pump ⊳ ALTERNATOR: 100% copper windings AVR voltage stabilizer – Yes Alternator model – Proton 184H Rated output at 400V – 30,000 Watts (30kW / 36 kVA) Maximum output at 400V (up to 15 min) – 34,000 Watts (34kW / 40 kVA) Rated current (400V) – 140.0 A Circuit protection – C16, C32, main – 100A Frequency – 50 Hz Alternator construction – Synchronous ⊳ ENCLOSURE: Sound-insulated housing Weatherproof construction Three-phase and single-phase sockets Hsdpstpvdtjfx Af Ieng Fuel tank capacity – 135 liters Operating time on full tank (average) – 20 hours Transport kit – Forklift pockets and HDS crane lifting lugs Dimensions – 220 x 95 x 123 cm Gross weight – 1240 kg ⊳ FEATURES: Voltage stabilizer (AVR) – Stamford SX460 (2%) - Electronic voltage stabilization under variable loads - Electronic frequency stabilization Automatic ATS operation (Automatic Transfer Switch) Overload and thermal protection Oil pressure, oil level, and coolant level sensors Glow plugs Oil pan heater Coolant heater Battery – 2 units of 40Ah Automatic battery charger ⊳ CONTROLLER: Controller model – Comap InteliLite 4 AMF 20 Engine hours counter Ammeter Voltmeter Integrated PLC logic and PLC editor Overload protection CAN module expansion SCADA system integration Additional outputs – for 4G, Ethernet, RS232/485 connections Remote control and monitoring via GPRS – Optional Communication: Modbus, Ethernet – Optional Why choose us? We are a company specializing exclusively in generator sets, operating in this industry for over 17 years, consistently striving to ensure our products offer top quality and maximum reliability. During this time, we have provided solutions to over 10,000 clients across Poland, even in its most remote regions. We carefully select our genset component suppliers, ensuring they are leaders in their respective industries. We offer a wide range of generator sets from 6 to 300kW, equipped with various engines including British Ricardo, American Cummins, or German Deutz, and we provide custom configurations tailored to specific customer requirements.