Vieno veleno smulkintuvas

ARTECH RR 130/286 W1-132

Sąlyga: naudotas, Gamybos metai: 1989, mašinos/transporto priemonės numeris: 1025, rankos pasiekiamumas: 13 300 mm, keliamoji galia: 2 300 kg, vėžės plotis: 3 000 mm, Įranga: kabina, kranas, Pagaminimo metai: 1989 (gamykloje atnaujintas 2007) Mašinos numeris: 1025 Vėžės plotis, m: 3,0 Kranas: OBX IV (pagaminimo metai 2007) Pasiekiamumas: 13,3 m Keliamoji galia be griebtuvo: 2 300 kg / 13,0 m Griebtuvas: įskaičiuotas Krano išdėstymas: už kabinos Kabinos pusė: kairė Kjdpjv Ddtkofx Aghsdw Pjūklas: 1,3 m Alpha Matavimas: vienos dalies pagalba su dviejų lygių matavimu, pagaminimo metai 2007 !! Parduodama kliento vardu !! Prieinama nuo 2025 m. balandžio

Gamybos metai: 2016, Sąlyga: naudotas, No. 10010 Doppstadt SM 620 K Trommel Screen Used, year of manufacture 2016 (completely overhauled by the manufacturer in 2024) Mobile drum screening machine on tracks. Suitable for humus/soil, wood, waste, compost, light construction debris, etc. 7,500 operating hours Tracked undercarriage incl. 2 travel speeds Track width: 500 mm Deutz diesel engine TCD3.6 L4, 90 kW at 1600 rpm (complies with EUROMOT IIIB/Tier 4i emission standard) Additional pump drive for attaching further hydraulic consumers Reversible fan at water and oil cooler Fully swing-out engine unit Fuel tank: 300 litres Ksdpfxov Eyqbe Aghodw Feed hopper: 5 m³ capacity Hydraulically folding side conveyor, belt length 5000 mm, belt width 1000 mm Hydraulically folding rear conveyor, belt length 5000 mm, belt width 1000 mm Emergency stop switches on side and rear conveyors Load-dependent regulated material feed from feeder floor to screening drum Continuously adjustable trommel rotation speed from 0–18 rpm Continuously adjustable hopper belt speed from 0–0.17 m/s Control cabinet at the rear of the machine with the following functions: Emergency stop switch (screen only) / rear conveyor fold/unfold / side conveyor fold/unfold / side conveyor bending Hydraulically folding cleaning brush with individual brush elements and spring tines Centrally positioned lubrication strips 24 V electrical control system Radio remote control incl. transmitter, receiver, 230 V charger, 12/24 V charging cable, transmitter holder (following functions can be controlled: engine stop, engine speed +/-, rear conveyor fold/unfold, side conveyor fold/unfold, machine travel & steering, stone grid preparation open/close) Hydraulic preparation for star screen insert operation Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Auxiliary hydraulic connection 40 l/min at rear of machine Magnetic drum for rear conveyor Flow divider at rear conveyor Internally geared hopper belt drive Screen drum SM620 QV30-38 BL08 for SM 620 profi/Plus/.2 (length 5430 mm / diameter 2000 mm / thickness 8 mm / perforation 30 mm (offset holes)) Transport dimensions approx. 10550 x 3000 x 3690 mm (LxWxH) Weight approx. 24,000 kg Sale on behalf of customer, ex location near 85221 Dachau, without dismantling, transport or assembly Errors in description and price excepted Dismantling, transport, and loading by us available as an option To avoid possible misunderstandings, an on-site inspection is possible and recommended by prior appointment Sale takes place as-is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "sold as seen" Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before pick-up or shipping Delivery conditions: ex location

Sąlyga: geras (naudotas), Gamybos metai: 2008, Lindner Power Komet 2800 from 2008, previously used for the production of Refuse Derived Fuel (RDF). The machine is in full working order, has been regularly serviced, and currently requires rotor and pressure plate refurbishment. Technical specifications: Model: Lindner Power Komet 2800 Year of manufacture: 2008 Kdedovt Uc Uopfx Aghew Application: RDF (Refuse Derived Fuel) production Throughput: 7-9 tonnes per hour with a 40 mm screen Technical condition: good, fully operational; scheduled to be dismantled by January 2025 Maintenance: serviced regularly

Sąlyga: naujas, Pressure 28 t Stroke 180 mm Table size 300 x 550 mm Piston diameter 130 mm Working speed min. 2 m/sec Working speed max. 9.8 m/sec Return speed 20 mm/sec Maximum pressure 200 bar Machine weight approx. 0.65 t Total power requirement 4 kW Space requirement approx. 1.15 x 0.75 x 1.1 m Kdjdpfx Agjgvkmrshjw • The horizontal bending and straightening press from Profi Press is a versatile hydraulic press, specifically designed for bending, profiling and straightening applications. The machine’s possible uses depend on the accessories mounted on the work table, the tool holder, and in the bores and pin holes. • The HB-28 model is equipped for light bending operations on the work table with an angle scale, and the press can also be supplied with tools (such as block punches) for mounting on the tool holder, as well as tools for installation in the bores and pin holes to perform a variety of tasks. • The hydraulic system can be adjusted via pressure and flow control valves, which regulate the pressing force and speed of the press. The press is equipped with a built-in pressure gauge. • The control panel is used to operate and display the piston stroke and to select between manual or automatic operation. The HB-28 model is also equipped with integrated memory for up to 4 different programs. • Operation is via electric foot pedals.

Sąlyga: naudotas, Gamybos metai: 1998, Turning length 3500 mm Swing diameter 1000 mm Centre height 500 mm Turning diameter over cross slide 600 mm Machine weight approx. 8.5 t Kodsv Hhv Iopfx Aghsdw incl. 2 steady rests and 900 mm faceplate

Sąlyga: naudotas, Kapokų katilas Schmid UTSR 900 ir UTSR 240, galia 900 kW + 240 kW, pagaminta 1997 m., žingsninė grotelinė degimo sistema (tinka prastesnės kokybės kurui), įskaitant 900 kW pneumatinį valymą, pelenų šalinimo sistema su konteineriu, multicikloninis separatorius, įtraukiama sraigtinė tiektuvė, stumdomas grindų tiekimas su hidrauline agregatu – 2 vnt. stumdomų strypų po 11 m ilgio, 3 m bendras plotis, įskaitant valdymo sistemą, 900 kW katilo šilumokaitis nesandarus, įtraukiami 2 vnt. po 5000 l akumuliaciniai rezervuarai, įtraukiami dūmtraukių įrenginiai, įrangą reikia išmontuoti savarankiškai! Įtraukiama įrangos dokumentacija! Daugiau nuotraukų pagal užklausą! Yra katilinės planas! Kdodpfxevyrwpo Aghsw

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 12599, Rotor diameter: 600 mm Rotor width: 1,450 mm Kodpfx Aok N Iy Nsghodw 12-knife rotor 3 rows of stationary knives Feed opening approx. 780 x 1,490 mm Drive motor: 132 kW

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 6 612 mm, Y ašies eiga: 5 645 mm, Z ašies eigos atstumas: 1 250 mm, stalo ilgis: 7 000 mm, stalo plotis: 2 500 mm, veleno greitis (maks.): 4 500 aps./min, atstumas tarp stulpų: 3 800 mm, Technical Data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm • Distance between columns: 3,800 mm • Distance table clamping surface – spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Speed in 2 stages, digital spindle drive: 60 – 4,500 rpm • Feed rate in CNC mode (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y and Z-axis each: 25,000 mm/min • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain iTNC 530 path control with 15" screen • Tool changer with 60 positions • Rotary table for operating multiple milling heads with automatic milling head change, including collet system for accommodating various milling heads, quick couplings for hydraulics, coolant and power supply, as well as the corresponding electrical safety switches • Centering of the milling heads on the rotary table via Hirth face gearing (on mounting plate and respective milling head) • 2 x milling heads: straight extension milling head (direct spindle), 45° milling head automatic • Crossbeam motorised traversable (for positioning only) • Operator platform: 2 operator platforms with safety enclosure and integrated control panel, traversing in X-direction, each with 2 doors Ksdoxgr Epspfx Aghjdw • Chip conveyors on both sides of the table as well as a cross conveyor • Longitudinal drive X-axis and cross drive Y-axis by rack and pinion and 2 servo motors (electronically preloaded backlash-free, master-slave principle) • Vertical adjustment Z-axis via ballscrew (Ø 80) and preloaded double nut • Zayer guideway system consisting of inserted or bolted, hardened steel strips • All axes equipped with INA roller recirculating shoes on each running surface • Counter guides for all axes additionally coated with plastic for optimum damping • Anchoring and leveling elements • The machine complies with the currently applicable EC directives The above information is taken from the machine documentation. The seller assumes no liability for the completeness or correctness. The actual technical specifications and functions of the machine are binding.

Sąlyga: geras (naudotas), Gamybos metai: 1993, veikimo valandos: 3 467 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 165, bendras svoris: 18 000 kg, bendras plotis: 2 550 mm, bendras ilgis: 12 000 mm, bendras aukštis: 3 000 mm, transporto plotis: 2 550 mm, transporto ilgis: 12 000 mm, transporto aukštis: 3 000 mm, galia: 243 kW (330,39 AG), Secondary shredding basket 150mm rhombus Kjdpfx Agewh Tdxjhodw

Sąlyga: geras (naudotas), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Kdjdjt Hxudjpfx Aghow Year of manufacture: 12/2008 / technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functional guarantee upon handover