Krano persidengimas

Armatec Kran

Sąlyga: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, darbinio aukščio: 2 000 mm,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Mikron / GF HPM 450 U WPC with Pallet Changer About the machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, comprehensively equipped! Very low spindle hours! Technical Data: -Heidenhain ITNC 530 HSCI -X-axis: 600 mm -Y-axis: 450 mm -Z-axis: 450 mm -B-axis: +45 / -120 ° -C-axis: 360 ° -Spindle speed range: 20,000 rpm -Spindle drive: 23 / 30 kW -Torque: 91 Nm -Tool holder: HSK 63 -Pallet size: 280 x 280 mm -Max. pallet load: 150 kg -Number of tool magazine positions: 60 -Max. tool diameter: 90 (130) mm -Max. tool length: 200 mm Iajdjx Hx Rhopfx Af Iol -Max. tool weight: 6 kg -Tool change time: 3 sec. -Feed force X-Y-Z: 5 kN -Rapid traverse X-Y-Z: 22 m/min -Acceleration X-Y-Z: 5 m/s² -Rapid traverse B-axis: 50 rpm -Rapid traverse C-axis: 140 rpm Equipment: -7 pallets, including 6 pallets with clamping devices (see photos) -Electronic handwheel -Infrared measuring probe -Laser tool measuring system -Direct path measuring systems -APS Advanced Process System -ITC Intelligent Thermal Control -rConnect Live Remote Control (1 year) -KinematicsOpt -CT 60 tool magazine -DYNAFIX 7-position pallet changer -SIGMATEC 15 / 900 cbm/h oil mist extraction unit -Tool air blow-off device -Blow air at the spindle slide -Blow air through the spindle center -Internal coolant system 18 – 70 bar -Paper band filter system -Chip conveyor -Spindle oil chiller Installation dimensions (L x W x H): 6,600 x 4,000 x 2,800 mm Weight: approx. 8,600 kg An on-site inspection/test under power is, of course, possible. We are not your average machinery dealer -> Here you get advice from CNC experts! We are happy to offer you transport, installation/moving in, commissioning, as well as operator training with our own technicians. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: -Service -Maintenance -Overhaul -Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Sąlyga: geras (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Bavelloni laminuoto stiklo pjovimo stalas LAMY 370 S + float stalas REV 372 SR maks. pjovimo ilgis: 3700 mm Iaedpexfamlefx Af Isl min. storis: 3 + 3 mm + PVB maks. storis: 8 + 8 mm + PVB įrenginio matmenys: 5740 x 3600 mm

Sąlyga: geras (naudotas), Gamybos metai: 1994, Molecular filling machine / Diagonal filling Weight 520 kg Isdpfx Afeir Efuj Ioal

Sąlyga: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: Oro kondicionierius, Lisec gas filling press for maximum element sizes of 3500 x 2500 mm, year of manufacture 2007, consisting of: RSVN-35/25, frame assembly zone, year 2007 RTVB-15/25ST, extension for measuring zone, year 2007 RTVB-15/25MZU2, measuring zone for gas filling press, year 2007 FPS-35/25U2, gas filling press for argon, year 2007 RTVB-15/25ST, outfeed conveyor for press, year 2007 Isdpjwca Hpefx Af Ioal UKL-35/25, tilting table, year 2007

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 66 600 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer you the following: Technical Data: Control system: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Max. table load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Iajdpexgnz Tefx Af Isl Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary tilting table including table cooling - BLUM NT laser tool measurement system - Calibration arbor with tool holder - Wireless touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper-belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, incl. rotating sight glass, air purge, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system - Selection and deselection of handling system via switch on the machine control panel - incl. additional rinsing inside the working area - incl. machine preparation for job management - incl. control panel arrangement on the left - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - incl. rotary union extended to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change and prior sale. Errors excepted!

Gamybos metai: 2021, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, ABUS overhead crane with KAPPEL lifting device, 500 kg capacity Iaedpfx Afsvzahfe Iol Dimensions: L x W 10 m x approx. 7 m Height: 5.5 m Model: GMI-KR 500 kg overhead crane Reference: S-GSL-017

Sąlyga: paruoštas naudoti (naudotas), Inkjet printer for frame bending machine Iajdehzgtujpfx Af Iol Length: 800 mm Width: 1000 mm Height: 1900 mm Weight: approx. 100 kg

Gamybos metai: 2006, Sąlyga: paruoštas naudoti (naudotas), Inclination: 7°, compressed air connection: 6.5 bar, connected load: 8.5 kW, length: 4,170 mm, width: 2,990 mm, height: 3,330 mm, weight: 2.8 t, including documentation. Iaedpfxeibiive Af Isl

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 6 400 mm, bendras plotis: 1 200 mm, bendras svoris: 850 kg, Schraml Clear 13 Special 4 Working height: 580 mm Year: 2007 Condition: Good used condition Open top Washing height: 1300 mm Brushes: 4 Iaodpfxsu Nw Szj Af Ijl Also available in line with drilling machine.