Traukti tvarkančių

Anzugsbolzen ISO 7388/2-B

Sąlyga: naudotas, Diameter various. Quantity 56x. Holder BT 40. Rbedpfx Ahewtrzye Hjt

Gamybos metai: 1988, Sąlyga: naudotas, Compressor unit type 178 A CD E Delivery rate: 4,760 l/min Operating pressure: 9 bar Rbsdpfegw Dqpox Ah Hjt Power: 30 kW

Sąlyga: naujas, Dimensions (L x W x H): 790 x 460 x 960 mm Weight: 70 kg Number of drawers: 7 Tool trolley with 7 drawers, equipped with tools - All extendable drawers are ball bearing mounted. - The entire workshop trolley is lockable. - Drawer 1: 1/4" premium ratchet. 1/4" universal joint 45 mm. 1/4" extension 100 mm. 1/4" socket set: 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4" long sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8" premium ratchet. 3/8" universal joint 55 mm. 3/8" extension 150 mm. 3/8" socket set: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8" long sockets: 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2" premium ratchet. 1/2" universal joint 75 mm. 1/2" extension 125 mm. 1/2" sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32 mm. 1/2" long sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 mm. - DRAWER 2 Ring, ratchet and socket set consisting of: Sockets: 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30 mm. - DRAWER 3 1/4" bit holders TT8, TT9, TT10, TT20, TT25, TT27, TT30, TT40. 1/4" insert bits T8, T9, T10, T15, T20, T25, T27, T30, T40. 1/4" insert bits HW3, HW4, HW5, HW6, HW7, HW8. 1/4" bit holders S0, S1, S2, S3, S4. 1/4" bit holders V6, V8, V10. 1/4" bit holder H6. 1/4" insert bits FD4, FD5.5, FD6, FD7. 1/4" insert bits PH1, PH2, PH3. 1/4" insert bits PZ0, PZ1, PZ2, PZ3. 1/4" insert bits H2, H4, H5. 8mm insert bits PZ1, PZ2, PZ3, PZ4. 8mm insert bits PH1, PH2, PH3, PH4. 8mm insert bits T20, T27, T30, T35, T40, T45. 8mm insert bits SL4, SL5.5, SL6, SL6.5. 8mm Allen hex bits 7, 8, 10. 1/2" spline bits M18 (POWER) 1/2" insert bits H14, H17, H19, H22, H24. 1/2" spline bits M16. 1/2" spline driver M16, 100 mm long. 1/2" bit holders T80 - 100 mm long. 1/2" pick-up bits M9, M16 - 100 mm long. 1/2" bit holder R9 - 100 mm long. 1/2" pick-up bits R10 - 140 mm long. 1/2" bits T40, T45, T50, T55, T60, T70 - 140 mm long. 1/2" bits H10, H11, H13 - 140 mm long. 1/2" bits M10, M12, M14 - 140 mm long. 1/2" bit holder H5 - 160 mm long. 1/2" pick-up bits H7 - 230 mm long. 1/2" bit holders R7, R8 - 230 mm long. 1/2" bit holder H7 - 230 mm long. 1/2" bit holder T30 - 300 mm long. 1/2" adaptor to 10 mm square drive. - DRAWER 4 Flat screwdrivers: 2.5x50, 3x75, 5x100, 6x100. Phillips screwdrivers: PH 2.5x50, 4x75, 5x75, 6x100, 8x150. Impact screwdrivers flat: 5x75, 6x100, 8x150, 6x38 stubby. Impact screwdrivers cross: 5x75, 6x100, 8x150, 6x38 stubby. - DRAWER 5 T-handle hex keys with ball end: 2 x 100, 2.5 x 100, 3 x 100, 4 x 150, 4.5 x 150, 5 x 150, 6 x 150, 8 x 200, 10 x 200 mm. Rbedpfju Imnpjx Ah Hot T-handle hex keys: 2 x 100, 2.5 x 100, 3 x 100, 4 x 150, 4.5 x 150, 5 x 150, 6 x 150, 8 x 200, 10 x 200 mm. - DRAWER 6 Water pump pliers 250 mm. Combination pliers 150 mm. Needle nose pliers 150 mm. Bent nose pliers 150 mm. Side cutters 150 mm. Internal bent circlip pliers 170 mm. External bent circlip pliers 170 mm. External circlip pliers 180 mm. Circlip pliers: 1.5 x 102, 2 x 102, 3 x 114, 4 x 127, 5 x 127, 6 x 140 mm. Claw hammer with fibreglass handle. - DRAWER 7 Nut driver 6 mm. Nut driver 7 mm. Nut driver 8 mm. Nut driver 10 mm. Nut driver 11 mm. Nut driver 12 mm. Nut driver 13 mm. Nut driver 14 mm. Nut driver 15 mm.

Sąlyga: naujas, Gamybos metai: 2024, Kudu drilling and milling center with CNC control and tool changer (3-axis) Drilling and milling center with movable machining unit – the worktable remains stationary while the drill head moves. The drilling center enables both manual and fully automatic operation. After each drilling process, the machining unit automatically moves in the X and Y axes to the next drilling position. Operation is designed to be extremely user-friendly. Data can be transferred to the machine control using DXF/DWG file formats via a programming station. Alternatively, the system can also be programmed directly on the machine control panel. The system is extremely robust and constructed using proven machine components. Technical data: • Measuring length: 6,000 mm • Overall length: 8,050 mm • Sturdy machine base • Drill head speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • X, Y, and Z axis driven by servo motors • Rapid traverse (X-axis): 20 m/min • Rapid traverse (Y-axis): 5 m/min • Distance table top to lower edge of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in mild steel (tool dependent) • Tapping: M4 – M30 (with floating chuck) • Y-axis travel: 300 mm • X-axis tolerance: ±0.1 mm • Y-axis tolerance: 0.06 mm • Z-axis tolerance: 0.06 mm • Main spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light curtain • Rear access protection via machine fence • Control: 21.5" touchscreen panel, reinforced front glass • Simple programming at the machine • Capable of milling slots and circles Rsdpfx Asfu Ivzeh Hobt • Lubrication via minimum quantity spray system • Without material clamps • Remote maintenance possible via TeamViewer (LAN interface) • Tool magazine for drilling tools, including dimensions and speeds • Simulation of work sequences • Digital handwheel Your advantages: • Protects workpiece surfaces • Clear, graphical user interface • Machining directly at the workpiece end is straightforward • 50% space saving compared to moving-table designs • Chips are collected in a chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are eliminated by CAD/CAM integration You are welcome to visit and inspect the desired machine at our manufacturing/showroom at any time. Please feel free to contact us. Plantec Maschinen GmbH

Sąlyga: naudotas, Gamybos metai: 2007, Pressure: 100 t Stroke: 500 mm Table dimensions: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight approx. 1.6 t Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is an Italian-made SICMI model, which was distributed by Knuth. Redovprv Rspfx Ah Hobt

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HR15149, Gamybos metai: 2025, keliamoji galia: 7 000 kg, kėlimo aukštis: 34 700 mm, kuro tipas: dyzelinas, stiebo tipas: teleskopinis, statybinis aukštis: 3 260 mm, galia: 155 kW (210,74 AG), šakių laikiklio plotis: 2 000 mm, šakių ilgis: 1 200 mm, tuščias svoris: 24 000 kg, bendras ilgis: 8 860 mm, pavaros tipas: Diesel, statybos plotis: 2 500 mm, Rotating telehandler Chassis number: HR15149 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Transmission: Hydrostatic Condition: New machine Technical condition: New Front tire type: Solid rubber Front tire size: MITAS EM60 17.5 R25 22PR Front tire condition: New Rear tire type: Solid rubber Rear tire size: MITAS EM60 17.5 R25 22PR Rear tire condition: New Description: 12-month factory warranty / Max. 2,000 operating hours Sideshift, Rear working lights, front working lights, heater, road approval (StVZO), fully enclosed cab, air conditioning, interior mirror, exterior mirrors, joystick, LED, seat, Rbodpewruqzjfx Ah Hot Chocks, remote control travel function, preparation for work platform with winch, TÜV preparation, 20 km/h, mechanically adjustable textile seat with headrest (GRAMMER), EcoStop, 2 cameras (on right side of telescopic head) with display in cab.

Sąlyga: naujas, SIMOTICS SD MOTOR TYPE: 1CV3282C Low-voltage motor, IEC squirrel-cage, self-ventilated, IP55 protection, thermal class 155(F) according to 130(B), cast iron housing. Basic Line, Premium Efficiency IE3, 60Hz, P60: IE2, 6-pole, Frame size 280M, 55 kW (50Hz), 66 kW (60Hz), 3-phase AC 50Hz 400V delta/690V star, 3-phase AC 60Hz 460V delta, IM B3 mounting, 3 PTC thermistors for shutdown (2 terminals), terminal box top-mounted. Rbodpfegpgymox Ah Hst

Sąlyga: geras (naudotas), Gamybos metai: 1993, CNC universal milling machine DMG MORI Type: MH 600 C Rbjdpfx Aheiihxhj Hjt Control: MAHO 532, year of manufacture: 1993. Equipped with automatic swivel milling head G17/G18 and B-axis rotary table. Without tool changer. For further data, please refer to the technical data sheet. Complete machine documentation and data backup available. Good general condition.

Sąlyga: naujas, Dimensions (L x W x H): 1045 x 5050 x 1010 mm Weight: 100 kg Number of drawers: 7 pcs Workshop trolley filled with 274 quality tools. With 7 drawers and 1 door Sturdy ball bearing guides (double bearings), anti-slip mat in every compartment, Rjdpfou Impasx Ah Hsbt Thick rubber top mat, central locking, 4 heavy-duty wheels 125 x 50 mm, of which 2 are swivel castors with brakes, 2 keys included.

Sąlyga: naujas, Thread diameter: M10 – M33 mm Infinitely variable speed: 35/115 rpm Torque: 320 Nm Redpofg U Slsfx Ah Hebt Air pressure: 6 – 8 bar Working range: 400 – 2000 mm The pneumatically driven D-JSC tapping machine features, among other things, a compressed air motor with quick-change chuck and a robust, flexible working arm. The boring arm can be mounted directly to the worktable using the mounting flange, making it immediately ready for use and ensuring extremely short set-up times. It is possible to easily bring the tap to the desired tapping hole without needing to position the workpiece directly beneath the tapping machine. This model is equipped with an adjustable angle feature, allowing the quick-change chuck to be tilted, enabling horizontal tapping operations as well. Pneumatic tapping machines for M3 – M12 threads, with adjustable angle. Comes with 6 quick-change chucks with slip clutch. Options: - Clamping table with T-slots: 750x600x650 mm or 990x700x800 mm - Magnetic base.