Ekscentrinis presas

Ambold PEEV 40/2

Sąlyga: naudotas, Pressure: 40 t Gjdpewxfmtefx Abdobg Outreach: 225 mm Stroke: 8 - 84 mm Table surface: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 mm Through-hole in table: 210 x 170 mm Clamping plate: 570 x 450 mm Total power requirement: 3.5 kW Machine weight approx. 2.7 t Space requirement approx. 1.4 x 1.1 x 2.1 m - Pneumatic clutch (Ambold) - Separate clamping plate - Press safety valve - Two-hand operator panel - Balluff cam switchgear - Foot switch - Control cabinet with ABB safety control and touchscreen display

Sąlyga: geras (naudotas), Manufacturer: OMERA Type: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Throat depth, horizontal (HOR): 670 mm Throat depth, vertical (VER): 940 mm Stroke cylinder: 350 mm Column diameter: 200 mm Specifications Metric / US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Gedpfskvnumex Abdebg Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Sąlyga: naudotas, Gamybos metai: 1977, Pressure: 250 t Stroke: 40 - 190 mm Stroke rate: 40 /min Throat depth: 500 mm Clearance between frame sides: 1050 mm Installation height: 615 mm Table size: 1380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Required floor space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual feeding operations in compliance with German accident prevention regulations (UVV) Gbjdpfx Aevuuaiebdog with motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand control.

Sąlyga: naudotas, Eccentric Punching Press HAULICK + ROOS Type RVD 125 Double Column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Gbodpfxehlnzko Abdeg Table opening: 470 x 140 mm Column gap: 900 mm Side column spacing: 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Shut height as shown: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double connecting rod drive with 4-point eccentric shaft bearing for off-center ram force absorption - Free-standing electrical cabinet - NC roller feeder EBU, width 250 mm, year 2003 - Separate control panel for roller feed unit - Coil direction from left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, mašinos/transporto priemonės numeris: 06 61 218, Ref. no.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine no.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Coil inner diameter: approx. 450 to 520 mm Coil outer diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Gsdpfeg U Utvex Abdobg Expansion of the carrying segments is manual using a hand crank via joints. Number of carrying segments: 3 Coil side guidance by robust clamping limit arms. Decoiler stand built in sturdy box-section as welded construction. Additional Equipment: Shutdown “Loop too small” via antenna switch, mounted on the column of the loop control base housing. Height infinitely adjustable. Strip side guidance at the base housing of the loop control, with lateral guide rods. Pass-through width infinitely adjustable.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, eigos ilgis: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Cylinder is movable - Electrically or manually operable - Pressure gauge Gbodpfx Ajgp Dc Rjbdeg - Emergency stop - 400V

Sąlyga: naudotas, Double Column Eccentric Press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feed Machine No. 88151005 Year of manufacture: 1988 / 92 Pressing force: 160 tons Column spacing: 970 mm Side column spacing: 560 mm Table size: 900 x 900 mm Ram area: 900 x 700 mm Tool installation height: 560 mm, max. 700 mm Stroke adjustment: 8–160 mm Ram adjustment travel: 125 mm Strokes per minute: 25 to 70 spm Strip width in roller feed: max. 400 mm Motor power: approx. 15 kW Power supply: 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - Ram weight balancing cylinder with compressed air - Hydraulic overload protection in ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided ram with oil-lubricated guides - UNIDOR press control system - Swiveling control panel - Control cabinets for press and feed, mounted together on a platform beside the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Width of press without feed: 2100 mm Depth of press with drive motor: 2300 mm Overall height of press: 4150 mm Net weight of punch press: approx. 18 tons For transport, the drive motor is removed and the machine is laid down. Included: NC roller feed/straightening machine ALBA type GGVHY400 Unit No. 1405 and 1406, Order No. 910708 (Year of manufacture: 1992) - ALBA PSS 300 feed controller - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive for feed hydraulically controlled - Height-adjustable feed assembly mounted to the press for adapting entry height - Hydraulic unit beside the machine - Pull-through straightener with hydraulic opening and closing Total system weight: approx. 24 tons Gbodpfx Aedzqlvsbdsg Transport space required: one mega trailer with 3 m internal height and 13.6 m loading length Good condition

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Cell with FANUC Arc Mate 100iD welding robot Year of manufacture: 2019 Gbsdpfx Abot Rwwrodsg Axes: 6 Reach: 1441 mm Payload: 12 kg Fanuc System R-30iB Plus robot controller and housing measuring 2 m x 2 m x 2.7 m (without Kemper extraction system)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, with soundproof cabin Table surface 1000x550 mm, ram surface 1000x450 mm Gjdpei An Ttofx Abdebg

Sąlyga: naujas, Gamybos metai: 2025, Band width: max. 38 mm Gbedpfx As Ea U Hobdjg Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Strokes: max. 260 1/min at full feed length Feed force: 90 N Available with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.