Winder

ALPHA MARATHON 3835-WT

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 552410, Gamybos metai: 1974, Gamintojas: Bobst, Šveicarija Modelis: Autoplatine SP 1420 E – 600 T Tipas: Išpjaustymo mašina / Autoplatina Pagaminimo metai: 1974 Mašinos Nr.: 552410 Techniniai duomenys: - Didžiausias lapo formatas: 1420 x 1020 mm - Mažiausias lapo formatas: 700 x 500 mm - Greitis: iki 4 500 lapų/val. - Elektros įvadas: 380 V, 50 Hz Ypatumai: - Tvirta konstrukcija kartonui ir gofruotam kartonui - Automatinis plokščių štampavimas Nljdpfx Aew Rb Ezja Ded - Lakštų krovimo ir išdavimo įrenginiai - Mechaninis valdymas su operatoriaus pultu - Patikrinta šveicariška kokybė

Būklė: geras (naudotas), Gamybos metai: 1971, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 36536, Juodas modelis Nlsdjzcc S Hjpfx Aa Dod Standartinė mašina

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Parduodama Fisher+Rueckle FZR-24 lukšto skersinio klijavimo mašina, pagaminimo metai 2013! Lukšto juostos ilgis: 400-1100 mm dviguba eiga / 350-2100 mm viena eiga Nlsdsumrf Aopfx Aa Djd Lukšto juostos plotis: 50-500 mm Lukšto juostos storis: 0,3-1,5 mm Maks. nominali galia / mašinos ciklai: 30 ciklų/min Vidutinis gamybos greitis: 17-20 ciklų/min Efektyvus šildymo zonos ilgis: 2478 mm Jungiamoji galia: 22 kW Suslėgtas oras: 6 bar Klijų tipai: PVA arba UREA pagrindo

Būklė: geras (naudotas), Gamybos metai: 2006, GALLUS EM 410 Pagaminimo metai: 2006 Nljdexzr Awepfx Aa Ded 10 spalvų Šaltasis folijavimas ir kt.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 Nlodpfx Aevz Hq Hoa Dsd - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), Max. working width: 1000 mm, feed rate: 5–20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, supplied with documentation, has been regularly maintained. Nljdpfsi E Trpjx Aa Ded

Būklė: naudotas, Valon Kone VK26M Mit Einlauf- und Auslauf-Förderbändern. Njdevgtz Njpfx Aa Dsld

Būklė: beveik kaip naujas (naudotas), Manufacturer: V. Randwijks Rotor diameter: 500 mm Rotor width: 700 mm Njdpfxog Snt Se Aa Dold Drive: 22 kW / 1,470 rpm

Gamybos metai: 2026, būklė: naujas, VKM - Package Singulation for Milled Timber Nledpfx Aeg Rxhgoa Djd With the singulation of milled timber, whether loosely stacked or in a package, pre-milled timber can be processed further in an economical manner. In a two-stage process, the timber is separated for downstream processing. It is also possible to feed the singled-out timber into a running process in a controlled manner. The inserter is mechanically designed to reliably feed even crooked timber. Additionally, it can be adjusted to the diameter of the timber to ensure that only one piece is transported further, thus preventing downtimes in the subsequent process.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, A complete 5-layer co-extrusion blown film line with 5 extruders and all peripheral equipment is available. Overall system dimensions (L/W/H): 14m/22m/11m. Blown film die head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm–2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melt output: 500kg/h, total power requirement: approx. 300kW. 1) Double turret winder Wintech, winding width: 2000mm, film thickness range: 35µm–150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6 inches. Nlsdpfxjv T An Sj Aa Ded 2) Kiefel Worms 70.29D extruder, power: 89kW, 5-zone barrier screw, speed: 125rpm, overhauled: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, 3-zone barrier screw, speed: 200rpm. 4) Central extruder Kiefel Worms 50.25D, power: 34kW, 3-zone core progressive screw, speed: 175rpm. 5) Adhesive extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, 3-zone barrier screw, speed: 200rpm. 6) Outer layer extruder Kiefel Worms 80.25D, power: 125kW, 5-zone barrier screw, speed: 150rpm. 7) Film calibration device Reinhold SRK 200/9.6. The entire line is controlled by a Plast Control system. Additional components: integrated width measurement, C-scan for profile measurement, web guiding system, corona pre-treatment, film take-off. Includes a spare 5-layer die head FSBK with IBC, spare rollers, ring gap blower with filter, extraction units, crane, and external system terminal. Documentation available. On-site inspection possible.