Sraigtinis kompresorius

ALMIG Combi XP 15

Būklė: labai geros būklės (naudotas), Gamybos metai: 2025, veikimo valandos: 5 h, Funkcionalumas: visiškai funkcionalus, Showroom unit, immediately available: Almig variable screw compressor COMBI XP 15-270D – 15 kW – with integrated refrigeration dryer with timer-controlled condensate drain with pre- and after-filter for compressed air with 270-litre air receiver equipped with Aircontrol Base controller Type: Combi XP 15-270 D Controller: AIR CONTROL BASE Year: 2025 Technical data Type: Combi XP 15-270D Adjustable working pressure range (continuously adjustable): 5 – 13 bar Free air delivery at minimum / maximum speed, measured in accordance with ISO 1217 Annex C at 5 bar (g): 0.50 to 2.49 m³/min at 6 bar (g): 0.48 to 2.41 m³/min at 7 bar (g): 0.48 to 2.32 m³/min at 8 bar (g): 0.45 to 2.23 m³/min at 9 bar (g): 0.45 to 2.12 m³/min at 10 bar (g): 0.45 to 2.02 m³/min at 11 bar (g): 0.45 to 1.90 m³/min at 12 bar (g): 0.44 to 1.80 m³/min at 13 bar (g): 0.43 to 1.69 m³/min Installed motor power: 15 kW Degree of protection / insulation class drive motor: IP 23 Dsdpfxew Du Dxo Affjup Operating voltage / frequency: 400 / 85–400 V/Hz Compressed air connection: 3/4" G Dimensions and weight: Length (mm): 1,530 Width (mm): 700 Height (mm): 1,640 Weight (kg): 595 kg Visit our premises in Erlangen – we always have a large selection of new and used screw compressors in stock.

Būklė: geras (naudotas), Gamybos metai: 2020, veikimo valandos: 1 730 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 580 kg, bendras ilgis: 1 335 mm, bendras plotis: 750 mm, bendras aukštis: 1 880 mm, slėgis (maks.): 11 juosta, aplinkos temperatūra (min.): 3 °C, aplinkos temperatūra (maks.): 45 °C, triukšmo lygis: 66 dB, apsaugos tipas (IP kodas): IP55, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, šaldymo sausintuvas, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Model: Aircenter SK22 Year of manufacture: 2020 Condition: Very good, used Operating hours: 6,000 h Load hours: 1,730 h Next service in: 2,589 h Technical Data Pressure: 11 bar Effective free air delivery: 1.67 m³/min Drive motor rated power: 11 kW Drive motor protection rating: IP 55 Electrical supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 750 x 1335 x 1880 mm Weight: 580 kg Compressed air receiver: 350 l Compressed air connection: G 1 Sound pressure level: 66 dB(A) Refrigeration dryer Power consumption: 0.49 kW Pressure dew point: 3°C Pressure drop: 0.06 bar Refrigerant: R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment per EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) Dujdpfjxnnd Dsx Affop – 5 m power supply cable with 32A plug

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 2 h, mašinos/transporto priemonės numeris: 101955.01001, Ekspozicinis modelis – iš karto prieinamas: Naujasis Kaeser SK 22 - 10 bar sraigtinis kompresorius Valdymas: SIGMA CONTROL 2 Pagaminimo metai: 2025 Darbo valandos: 2 val. Slėgis: 10 bar Nominali galia: 11 kW Tiekimo kiekis: 1,68 m³/min Garso lygis: 66 dB(A) Suspausto oro išėjimas: 1" Dusdpexr Dmvefx Affep Išmatavimai (ilgis x plotis x aukštis): 750 x 895 x 1260 mm Svoris: 312 kg Darbo valandos: 2 val. Naujoms mašinoms galima patogiai lizinguoti per mūsų partnerių banką. (Taip pat galimybė klientams iš Austrijos ir Šveicarijos) Aplankykite mūsų prekybos vietą. Visada turime didelį pasirinkimą naujų ir naudotų kompresorių sandėlyje!

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Immediately available: New speed-controlled ALMIG screw compressor LENTO 22 LK (air-cooled), oil-free Equipment: - AIR CONTROL P controller Technical Specifications Type: LENTO 22LK Adjustable operating pressure: 5 to 10 bar (stepless adjustment) Free air delivery at minimum/maximum speed (measured according to ISO 1217 Annex C): At 5 bar min/max: 1.03 / 3.67 m³/min At 6 bar min/max: 1.00 / 3.46 m³/min At 7 bar min/max: 0.97 / 3.29 m³/min At 8 bar min/max: 0.93 / 3.06 m³/min At 9 bar min/max: 0.90 / 2.82 m³/min At 10 bar min/max: 0.87 / 2.58 m³/min Drive motor rated power: 22 kW Drive motor protection/insulation class: IE 3 Fan motor rated power: 0.2 kW Dujdpfsh Unprex Affep Fan motor protection/insulation class: IP 54 / H Operating voltage / frequency: 400 V / 50 Hz Residual oil content: 0 mg/m³ Sound pressure level (DIN 45635 Part 13) Sound insulated, at: 50% load: 67 dB(A) 100% load: 69 dB(A) Dimensions: Length: 1,880 mm Width: 850 mm Height: 1,985 mm Weight: 910 kg Compressed air connection: G 1 inch Oil-free screw compressors of the LENTO series ensure maximum efficiency in compressed air preparation by precisely matching the delivery rate to the required compressed air demand, maintaining low compressed air outlet temperatures, and minimizing service and maintenance costs. The demand for high-quality, 100% oil-free compressed air is not only essential in the pharmaceutical, food, electrical engineering, and medical industries but is also required wherever products of the highest quality are manufactured. This is why ALMiG’s oil-free LENTO series compressors provide maximum compressed air quality for the most sensitive applications. Only water—the most natural of all raw materials—is used in the compression process. The result is: - Clean, environmentally friendly, oil-free compressed air; dust particles drawn in are washed out by the water - Clean condensate—pure water—which can be discharged directly into the sewage system - Lowest compression temperatures thanks to optimum heat dissipation via water, resulting in minimal energy consumption for compressed air production

Būklė: naujas, Gamybos metai: 2026, veikimo valandos: 1 h, New ALMIG LENTO 15 LK variable-speed (air-cooled), oil-free screw compressor Equipment: - AIR CONTROL HE controller - GLW Load/No-load mode Technical Data Model: LENTO 15 LK Adjustable system operating pressure (continuously adjustable): 5 to 10 bar Free Air Delivery at min/max speed, measured according to ISO 1217 Annex C: At 5 bar min/max: 1.03 / 2.64 m³/min At 6 bar min/max: 1.00 / 2.42 m³/min At 7 bar min/max: 0.97 / 2.20 m³/min At 8 bar min/max: 0.93 / 2.03 m³/min At 9 bar min/max: 0.90 / 1.82 m³/min At 10 bar min/max: 0.87 / 1.63 m³/min Rated power drive motor: 15 kW Protection/insulation class drive motor: IE 3 Rated power fan motor: 0.2 kW Protection/insulation class fan motor: IP 54 / H Operating voltage / frequency: 400 / 50 V/Hz Residual oil content: 0 mg/m³ Sound pressure level (DIN 45635 T.13) sound-absorbed, at 50% load: 66 dB(A) 100% load: 68 dB(A) Length: 1,880 mm Width: 850 mm Height: 1,985 mm Weight: 890 kg Compressed air connection: G 1 inch Oil-free screw compressors from the LENTO series ensure maximum efficiency in compressed air treatment thanks to precise matching of the volumetric flow to the actual air demand, low compressed air discharge temperatures, and minimized service and maintenance costs. Djdpfodtm Ndjx Affjup The demand for high-quality, 100% oil-free compressed air exists not only in the pharmaceutical, food, electronics, and medical industries, but also wherever products of the highest quality are produced. That’s why ALMiG’s oil-free LENTO compressors are designed to deliver maximum compressed air quality for the most sensitive applications. Only water—the most natural of all resources—is used during the compression process. The result: - Clean, environmentally friendly compressed air without oil; intake dust particles are washed out by the water - Clean condensate – pure water – can be discharged directly into the sewer system - Lowest compression temperatures thanks to optimal heat dissipation through the water, resulting in minimal energy consumption for compressed air generation

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SN 1171, ruošinio svoris (maks.): 450 kg, darbinio aukščio: 870 mm, Y ašies padavimo greitis: 45 m/min, darbinis plotis: 300 mm, garantijos trukmė: 12 mėnesiai, bendras ilgis: 1 900 mm, aukščio reguliavimo tipas: mechaninis, bendras svoris: 450 kg, bendras aukštis: 1 500 mm, bendras plotis: 1 300 mm, suslėgto oro jungtis: 6 juosta, Įranga: dokumentacija / vadovas, The APACHE 3 is a versatile and cost-effective solution designed for both craft and industrial applications, making it ideal for coating façade cladding and their substructures. It is perfectly suited for coating cross-sections of 300 mm x 25 mm without any restrictions and delivers highly efficient and economical top-quality surface finishes, all without requiring specialized operator knowledge. The system can also be integrated into automated plants or coating lines. It coats boards, profiled boards, tongue-and-groove boards, rhomboid profiles, glued laminated timber, and structural timber. Suitable for decking boards, garden houses, saunas, or privacy screens – essentially any products that require a premium-quality visible surface. Their substructures (typically black) are coated with thin, highly pigmented stains and wood preservatives without the need for side brushes. The APACHE 3 sets itself apart from standard market products with its robust monoblock welded steel frame and a finish applied via a high-temperature process using extremely durable Teflon (enamel). This non-stick coating ensures a self-cleaning and very low-maintenance operation. The machine offered is brand new and available for inspection in our showroom. We are happy to demonstrate our machines and systems at our facility or at a customer’s site near you. For more information and a detailed description, please visit our SARMAX website. APACHE 3 Serial number: SN 1171 Flood coating system with three (3) brushes Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10 - 45 m/min Number of powered transport rollers: 3 Transport roller diameter: 80 mm Brush arrangement: two (2) from above, one (1) from below Brush diameter: 160 mm Central brush drive: 2.2 kW Compressed air blow-off left/right, fanned nozzles for blowing out tongue and groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power consumption: 4.5 kW Working height: 900 +/- 50 mm Weight approx.: 450 kg Operation: via control and indicating devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Colour, design: grey RAL 7046 Dujdpfx Ajxhquxeffop

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 330 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 24342305, galia: 7,5 kW (10,20 AG), darbinis slėgis: 10 juosta, aušinimo tipas: oras, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, šaldymo sausintuvas, Renner Screw Compressor RS-Pro 7.5 - 13 bar Rated Power: 7.5 kW IE4 Motor mounted on a 500L galvanized tank with refrigeration dryer and condensate drains -includes RENNERtronic Plus Touch -with soundproof enclosure and pre-filter grille Connection: G1/2" Compressor delivery at 13 bar: 0.86 m³/min Includes Renner Screw Compressor RS-PRO 7.5 - 13 bar Rated Power: 7.5 kW IE4 Motor Duodpfx Afev Ingpofsp -includes RENNERtronic Touch -Compressor with soundproof enclosure and pre-filter grille Connection: G1/2" Delivery volume at 13 bar: 0.86 m³/min Complete price

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, tūrio srautas: 5,45 m³/val, slėgis (min.): 13 juosta, ALUP EVOLUTO 45 sraigtinis kompresorius Kintamo greičio (su dažnio keitikliu) Dodpfx Asyh Nc Hjffoup Variklis 45 kW Našumas 5,45 m³/min Slėgis 13 bar Pagaminimo metai: 2022 Darbo valandos: 6400

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, mašinos/transporto priemonės numeris: S0063866, New speed-controlled 45 kW screw compressor ALMIG Variable XP 45 Control system: Aircontrol Premium Year of manufacture: 2022 Operating hours: 1 h Available immediately! Technical Data Model: VARIABLE XP 45 LK Adjustable operating pressures (infinitely variable): 5 - 13 bar Dedpoxw T Sxefx Affoup Free air delivery at minimum/maximum speed, measured according to ISO 1217 Annex C at 5 bar (g): 3.02 / 8.42 m³/min at 6 bar (g): 3.00 / 8.40 m³/min at 7 bar (g): 2.98 / 8.38 m³/min at 8 bar (g): 2.96 / 7.86 m³/min at 9 bar (g): 2.95 / 7.08 m³/min at 10 bar (g): 2.93 / 7.02 m³/min at 11 bar (g): 2.90 / 6.26 m³/min at 12 bar (g): 2.85 / 6.23 m³/min at 13 bar (g): 2.82 / 5.92 m³/min Installed motor power: 45 kW Protection rating / insulation class drive motor: IP 55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 Part 13): 72 dB(A) Length: 2,000 mm Width: 1,250 mm Height: 1,750 mm Weight: 1,555 kg Compressed air connection: G 2" Visit our showroom in Erlangen. We always have a large selection of new and used compressors in stock. For new machines, we offer simple in-house leasing arrangements through our bank.