Pilna didelių rąstų pjovimo linija

AKE,Söderhamns, Remill, Catech, Ari

Būklė: labai geros būklės (naudotas), Storti RM 500 Edger - Italian manufacture - Year of manufacture: 1993 - Electrically adjustable saw blade spacing Iaedpfek Talpox Aaujr TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum workpiece width: 600 mm - Minimum material length: 800 mm - Maximum blade diameter: 600 mm - Spindle diameter: 40 mm - Two upper feed rolls - One upper pressure roll - Feed roll motor power: 2 x 1.1 kW - Feed rolls with automatic pressure adjustment - Seven lower driven toothed rollers - Electric adjustment of saw blades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive roller diameter: 100 mm - Feed drive motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3500 kg

Būklė: naudotas, Gamybos metai: 2006, Bruks būgninis smulkintuvas, modelis 820CM, pagaminimo metai 2006. Isdpsxr Trnjfx Aauear

Būklė: naujas, Gamybos metai: 2025, HOCHLEISTUNGS-BANDSÄGE VON WRAVOR, SPEZIELL ENTWICKELT FÜR DAS PRÄZISE UND EFFIZIENTE SCHNEIDEN VON BSH-BALKEN (BRETT-SCHICHT-HOLZ). SIE GEWÄHRLEISTET HOCHWERTIGE SCHNITTE, MINIMALEN MATERIALVERLUST UND OPTIMALE PRODUKTIVITÄT. Iaedpovu Um Njfx Aausr 📌 Wichtige Merkmale: ✔ Präzises Schneiden von Brettschichtholz (BSH) ✔ Automatische Steuerung für erhöhte Effizienz ✔ Robuste und zuverlässige Bauweise

Būklė: naudotas, Gamybos metai: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has been professionally dismantled, and is stored in a warehouse. Technical Details - Output: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for mould shells - Number of heating modules: 10 - Neck finish: 29/25 - Operating hours: 47,000 - The machine has been serviced regularly Iodpfx Aaerkgy Ususar Machine equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blow wheel for 6 cavities - Sidel control cabinet - Sidel PCC drive & control panel - Comprehensive spare parts list available on request

Būklė: naujas, Ostas 3-Roller Plate Bending Machine SBM 1270 x 95 Special features included in the price: - Hardened rolls - Motorized rear roll adjustment - Digital display Features: • Asymmetrical 3-roller plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swiveling upper roll • Conical bending device • Foot switch Technical details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm Iasdpfjg Tzbhsx Aauor • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions L-W-H: 2100 x 760 x 1250 mm • Weight: 470 kg

Būklė: naudotas, Parduodama: BRENTA pramoninė rąstų pjovimo staklė su Progress rąstų vežimėliu Sunkiosios BRENTA pramoninės rąstų pjovimo staklės (juostinis pjūklas / stovas) su Progress rąstų vežimėliu, iš profesionalios medienos pjovimo įmonės. Techniniai duomenys Gamintojas: Ateliers de Construction Louis Brenta SPRL (Belgija) Modelis: ETYELEC Mašinos Nr.: 406341 Variklio galia: 60 AG (apie 44 kW) Apsisukimai: 340 aps./min Juostos ratų diametras: Ø 1.400 mm Iedpfx Aex Ndphsauear Būklė Juostos ratai ir stovas prieš metus perdirbti ir nugludinti Nauji guoliai juostos ratuose Stabilus darbas Progress rąstų vežimėlis Sunkiosios pramoninės konstrukcijos Mechaninis ritininis takelis su grandinine pavara

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 12786 040, bendras svoris: 20 000 kg, rotoriaus skersmuo: 640 mm, bendras ilgis: 4 900 mm, bendras aukštis: 2 600 mm, bendras plotis: 4 100 mm, rotoriaus plotis: 2 000 mm, galia: 203 kW (276,00 AG), sukimosi greitis (maks.): 340 aps./min, įėjimo srovė: 415 A, Įranga: sūkių greitis be galo kintamas, The Vecoplan VAZ 2000 M F-T is a powerful single-shaft shredder. This robust shredder offers an efficient and reliable solution for a wide range of applications. Fields of application: - Household waste - Plastics - Paper With its proven technology and high throughput capacity of 4-5 tons per hour, the VAZ 2000 M F-T is the perfect choice for size reduction and volume reduction in disposal and recycling processes. The images are for illustrative purposes only. They do not show the actual machine being offered, but serve merely as examples of what the machine may look like after refurbishment. Price upon request. Iasdpfx Ajurkc Reauer

Gamybos metai: 2011, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL Tilt Destacking Unit - SH/4t - 1.75x1.75x6.00m - 4t – minimum length 2.50 m, semi-automatic package separation. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions 1.75 x 1.75 x 6.00 m, max. stack load 4 t, shortest wood length 2.5 m. 2. HOWIAL Lamella Separator VE 1 for cross-cut saw. With pneumatically controlled fingers for material marked after defect detection, deposited on the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Ijdpfxsi Ezx Do Aauear Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. 4. Gann DMT-8 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. System integrated in a large control cabinet, complete with inkjet printer. 5. HOWIAL Cross-Cut Saw AS-30 B Pneumatically controlled under-table cross-cut saw with 2 automatic feed units, automatic cross-cutting. Special photoelectric cell control for detection of fluorescent marking lines. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Feed speed max. approx. 60 m/min 6. HOWIAL Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/sec 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. cross transfer, equipment for the finger jointing automation. Driven by round belts, all rollers driven. Cross removal via chain conveyor. Ejector ± moisture, right side. Adjustable transport speed 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Infeed length from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger profile 15/15 Spindle speed approx. 6000 rpm Total connected electrical load approx. 62 kW Machine weight approx. 9 tons. OEST comb gluing system for PU adhesives Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with De-stacking Driven roller conveyor with automatic ejector and hydraulically operated de-stacking arms. Technical data: H: 920 mm L: approx. 12,000 mm 10. Safety Fencing including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385. Support distances freely adjustable, integrated measuring scale, automatic calculation of support distances in software. Fully automatic test sequence via mouse click on PC (not included). Alternatively, test sequence can be triggered from control panel. Connects to any standard PC or laptop (Win 2000/XP) using provided RS232 serial cable. Fully automatic data acquisition and test report generation in MS Excel with graphical presentation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISASSEMBLY

Būklė: geras (naudotas), Gamybos metai: 2019, CNC throughfeed machining centre with dual gripper drive in X-direction and gantry design in Y-direction. The second gripper allows for formatting up to 15 mm as well as continuous milling movement in the X-direction. The workpiece length (X-direction) is measured using a sensor. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle: 12 kW HSK-F63, max. 24,000 rpm 4-position linear tool changer for milling tools. Maximum tool diameter: 120 mm Maximum tool length: 100 mm Single pick-up station for ergonomic loading or removal of tools from the machine. Additionally usable as an additional tool position for 11 virtual tools. Automatic tool length measuring system in Z-direction Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Iasdpfxoxrahcj Aaujr Air cushion tables front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation licence Dongle upgrade 3D simulator with collision checking for WOODFLASH at the machine Workpiece release at the rear of the machine Machine supplied without tools and HSK holders.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, approx. 4.5 m long feed and centering table Chain-driven from the feed motor Centers the round timber to the rotor axis Debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit Non-driven outfeed table Isdpfx Aaou Hmacjuear Machine workshop-inspected Machine cleaned and newly painted