Maišinis filtras - NAUJAS - ATEX

AIRMACHINERY AF-20X

Sąlyga: naujas, Gamybos metai: 2023, Standby power output: 20 kVA (16 kW) Full load: 17.5 kVA (14 kW) Voltage: 230/400 V Generator output: 16 kW Continuous generator output: 14 kW Number of phases: 3 ECU calibration Fuel tank capacity: 60 l Liquid cooling Frequency: 50 Hz Speed: 1,500 rpm Engine type: inline engine, 4-cylinder, naturally aspirated Cylinder bore and stroke: 98 x 105 mm Displacement: 3.2 liters Oil capacity: approx. 3 l (between min./max. on dipstick) Coolant capacity: approx. 5 l Fuel: Diesel Compression ratio: 17.2:1 Central control: DATAKOM D300 Insulation class (generator): H Number of windings (generator): 12 IP protection class (generator): IP23 Excitation type: shunt Alternator voltage regulation: +/- 1% Dimensions (L x W x H): 2,000 x 900 x 1,070 mm Emission standard: EURO III Gsdpsi Nthqsfx Aczett Weight: 730 kg

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 26 920 h, IRB 6640-235/2.55 Year of manufacture: 2011 We are also pleased to offer this robot fully reconditioned upon request! Gtedpfx Acjim Si Aezet For further information, please do not hesitate to contact us!

Sąlyga: naujas, Gamybos metai: 2022, Working width: 630 mm Planing height: 300 mm Cutterhead: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: digital readout Gsdjl D Rxfjpfx Aczjtt Feed speed: steplessly adjustable 5 - 22 m/min Infeed roller: steel Pressure bar: sectional Outfeed roller: rubber 2 x Table rollers: no Motor power: 9.2 kW Extraction port: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Sąlyga: naujas, Key features of the machine: The TH 630 thickness planer is a robust and straightforward design intended for daily workshop use, with a cutterhead width of 630 mm. It features a large, heavy-duty ribbed cast-iron table, which completely eliminates vibrations during operation. The machine is equipped with an exceptionally powerful motor driving the cutterhead (fitted with serrated knives), ensuring even the most demanding wood planing tasks are performed with ease. Each knife is easily replaceable if worn or damaged. The table height adjustment is automatic upon entering the desired dimensions. The combination of these features allows for highly precise cutting settings. Highlights: - Worktable mounted on four screws - Controller for automatic table height adjustment - 120 mm cutterblock with 4 knives - Capability to process large workpieces Technical specifications: - Maximum planing width: 630 mm - Maximum planing height: 300 mm Gsdpfx Acsgpg E Sezstt - Minimum length of workpiece: 280 mm - Cutterblock diameter: 120 mm - Number of knives: 4 - Knife dimensions: 630x30x3 mm - Power supply: 400 V - Total power: 7.5 kW - Variable feed speed: 4–20 m/min - Electric table lift - Extraction port diameter: 150 mm - Weight: 890 kg - Table dimensions: 1050x630 mm - Cutterblock speed: 5,500 rpm Machine available immediately! Machine dimensions: - Length: 1,060 mm - Width: 1,060 mm - Height: 1,160 mm

Sąlyga: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) Gtodpfogwbbqjx Aczot No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Sąlyga: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Godeqlck Nspfx Aczjtt Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Sąlyga: naudotas, Kündig Premium-2 1350 RP Aukštos kokybės produktas iš Šveicarijos PASTATI STALO MAŠINA / automatinis galvutės nustatymas Platus juostinis kalibravimo-finišo šlifavimo automatas 1-asis agregatas: grioveliuota guminė kontaktinė volas 80 Sh Kontaktinio volo lygis reguliuojamas be pakopų pagal grūdėtumo skalę 2-asis agregatas: pneumatinis šlifavimo pado agregatas Juostos pavaros variklio galia 15 kW Darbinis plotis 1350 mm Maksimalus ruošinio pravažiavimo aukštis 200 mm Padavimo greitis 3–15 m/min, be pakopų reguliuojamas Automatinis ruošinio storio nustatymas ENORMATIC greitas nustatymas su padavimo aktyvavimu (ilgoms ruošiniams) SPS valdymas su jutikliniu ekranu ir Teach-in funkcija visų darbo programų automatizavimui ir administravimui Gjdpfxex A T Epo Aczott Įrengti įėjimo ir išėjimo stalai su ritiniais Papildomas išėjimo stalas, nulenkiamas Mašina PRIŽIŪRIMA KÜNDIG SERVISO Pirmas pristatymas: 2018 m., iš mokomosios dirbtuvės / atleidimas į pensiją Mažai darbo valandų Sandėlyje Lieboch / Galima lizingas

Sąlyga: naujas, Gamybos metai: 2025, HOLZING RLA X3 VIBER Capacity 26,900 m³/h with sawdust auger (rotary valve, screw conveyor) Capacity approx. 26,900 m³/h Dimensions: 1920 x 4685 x 6285 mm Filter type: 100% polyester, 5 micron Buffer storage volume: 8.53 m³ Filter size: Ø160 mm, Length: 1680 mm Number of filters: 144 Gjdpfxolk Dtnj Aczett Filter area: 123.84 m² Filter thickness: 1 mm Pressure chamber: yes 0.75 kW geared motor for screw conveyor Rotary valve: 0.75 m² 0.17 kW vibration motor Speed: 3000 rpm Power: 40 kW Number of turbines: 2 Transport dimensions (L/W/H): 10/2.5/2.7 m Weight (extraction unit + 2 turbines): 3100 kg

Sąlyga: labai geros būklės (naudotas), Self-cleaning dust air filter Gtjdsv Ny Emspfx Aczot Air flow rate: 20,000 (maximum design) Dimensions: 4000 x 2450 x H 8000 mm approx. Total filter surface area: 170 m² Filters: antistatic polyester fabric – new Filter cleaning system: reverse air jet with regulation and control unit Filtered dust discharge system: motorized screw conveyor, rotary valve; discharge into big-bags Electric fan: 30 kW Electrical panel: star/delta start (no inverter) Machine checked and overhauled before delivery to the user

Sąlyga: labai geros būklės (naudotas), COMPLETE 4-SIDED EDGE PROCESSING AND EDGEBANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, comprising the following machines: X04004A) Loading portal (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for finished cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edgebanding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st drilling machine "WEEKE" Model BST 500 D X04004G) 2nd drilling machine "WEEKE" Model BST 500 D X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for finished cut) Gjdpfxjlikvhe Aczjtt X04004M) Stacking portal (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA