Lipni kasetė

Agrosilva AS

Būklė: naujas, Geriausia kaina: 4499 Eur (EXW Jonava, Lietuva) Stumdomo stalo matmenys – 2200 x 375 mm Didžiausias apdirbimo ilgis – 1500 mm Atstumas tarp pjūklo disko ir išilginės liniuotės – 1140 mm Pjūklo disko skersmuo – 400 mm Pjovimo aukštis (90°) – 115 mm Pjovimo aukštis (45°) – 105 mm Pagrindinės ašies apsisukimų skaičius – 4500/6000 aps./min Pagrindinės ašies skersmuo – 30 mm Pjūklo disko pasukimo kampas – 0–45° Pjūklo disko pakėlimas/nuleidimas – elektrinis valdymas Pagrindinio variklio galia – 5,5 kW Įpjovimo pjūklo disko skersmuo – 120 mm Įpjovimo disko apsisukimų skaičius – 7000–8000 aps./min Ledjdnxydopfx Acpork Įpjovimo veleno skersmuo – 20 mm Įpjovimo variklio galia – 1,1 kW Svoris: 700 kg * Naudojant 400 mm disko pjūklą, mažesnį diską reikia nuimti. Sumažintam pjūklui rekomenduojama nenaudoti didesnio nei 350 mm pagrindinio apsauginio gaubto.

Būklė: naudotas, SPE Renergi žemos temperatūros džiovintuvas. Renergi džiovintuvas skirtas pjuvenų ir kitų medžiagų džiovinimui biokuro gamybai. Džiovintuvas gali džiovinti pjuvenas, žievę ar medžio drožles — sumažinant drėgmės kiekį nuo maždaug 50 % iki apytiksliai 10 %. Šis žemos temperatūros džiovintuvas naudoja šiltą (arba karštą) vandenį nuo rekomenduojamos 65 °C temperatūros ir aukščiau. Didžiausia vandens temperatūra – 110 °C. Energijos tiekimo sauga: džiovintuvas gali būti prijungtas tik prie 3x400 V AC (630 A) 50/60 Hz elektros tinklo su atskiru apsauginiu įžeminimo laidininku. Energijos tiekimo duomenys: • Įtampa: 400 V AC, trys fazės • Rekomenduojama saugikliai tiekimo linijoje: ne daugiau 3x630 A • Tipinė elektros galia: 200 kW Džiovintuvo matmenys: maždaug 17,4 x 5,7 m, aukštis — 10,7 m. Reikalingas aikštelės plotas: apie 21,4 x 8,0 m. Mažiausias patalpos aukštis — 15 m (arba bent 4 m virš žaliavos padavimo angos). Oro tiekimas: mažiausiai 24 kg dujų/s šviežio oro reikia šiai mašinai veikti. Tai atitinka 20 nm³/s arba 72 000 nm³/val. Oro srautas: maks. 200 l/min Oro slėgis: min. 4,5 bar, rekomenduojama 6,0–8,0 bar Vandens tiekimas: karšto vandens tiekimas su srautu 32 dm³/s. Vandens slėgis: min. 1,5 bar, maks. 6,0 bar Darbinės temperatūros diapazonas: • Įeinančio oro temperatūra: –20 °C iki +50 °C • Santykinė drėgmė: 0 % iki 60 % Ledpfx Acjwp Rqfspsrk Žaliava / terpė: • Santykinė drėgmė: 45 % – 55 % (pagal svorį) • Pageidaujama santykinė drėgmė išdžiovintoje medžiagoje: 8 % – 15 % Našumas: • Dvigubos kameros, 4 m pločio džiovintuvas tipiniu režimu vienu įkrovimu gali išdžiovinti 2400 kg 55 % drėgmės žaliavos • Džiovintuvas pajėgus per maždaug vieną valandą išdžiovinti 6000 kg žaliavos (nuo 55 % iki 10 % drėgmės) SRE džiovintuvas suprojektuotas pagal ES direktyvas. Įranga atitinka šių norminių aktų esminius reikalavimus: • Mašinų direktyva 2006/42/EB • LVD 2006/95/EB • EMC 2004/108/EB Džiovintuvas yra Straupės sen., Cėsių r., LV-4152, Latvija. Galima apžiūra darbo dienomis nuo 8:00 iki 17:00 val., iš anksto susitarus dėl apžiūros laiko. Džiovintuvas jau išmontuotas. Visos elektros schemos, eksploatavimo instrukcijos ir vadovai prieinami. Pageidaujant galime pateikti kontaktą pasikonsultuoti su šio tipo džiovintuvą eksploatuojančiu specialistu. Kaina: 20 000,00 EUR (PVM neįskaičiuotas).

Būklė: naujas, Gamybos metai: 2025,

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Holtec rūšiavimo bloko traukinys, tipas SBZ. Ilgis 94,5 m. 52 dėžės. Lodsw Ug Agspfx Acpjrk

Būklė: nepatikrintas (naudotas), Gamybos metai: 1991, Torwegge multirip saw Lodpeucnukefx Acpork Chain width: 250 mm Cutting height: 100 mm Total connected load: 39 kW

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Very robust gantry roller conveyor with hydraulic lifting and lowering cross conveyor. Part 1: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Height 1,000 mm. Integrated hydraulically operated lifting and lowering cross conveyor with 4 chain strands. Spacings: 1,500 - 1,300 - 1,000 mm. Fully sheeted. Lrodot Hg Huspfx Acpsk Hydraulic support rollers. Driven by geared motor. New bearings. Part 2: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Integrated hydraulically operated lifting and lowering cross conveyor with 6 chain strands. Cantilevered, allowing the sawn goods to be conveyed to the left or right under the roller conveyor. Fully sheeted. Including hydraulic power unit for both roller conveyors.

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Holtec Bruks long log infeed with root reducer consisting of: - Infeed cross conveyor with 6 chain strands, split drive. - Holtec hydraulic step feeder with split drive. - Bruks root reducer type RR 1200 for long logs – milling length 1200 mm. - Holtec heavy-duty conveyor belt for round timber. - Waste scraper conveyor and distribution auger. Ledpfx Acjwxck Aspork

Būklė: geras (naudotas), Board sorting line / Sorting system / Length sorting line Esterer Right-hand discharge 5 sorting bins Total length: 26 meters 1st bin: 2 meters 2nd bin: 3 meters Lsdpfsgw Scqox Acpjrk 3rd bin: 4 meters 4th bin: 5 meters 5th bin: >5 meters Good condition – immediately available Location: Germany, near Landau an der Isar Also see my other listings. I look forward to your inquiry.

Būklė: naudotas, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture: 2017 Thermal treatment plant / thermo-chamber for wood modification The WTT thermo-chamber is a facility for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on the thickness and type of wood. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler unit using thermal oil as the heat transfer medium. Technical details: Capacity: 5,950 - 9,900 m³ timber per year (based on 330 working days) Effective volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave for thermal treatment 2. Vacuum system to evacuate the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, heated only) Control and operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for easy trolley movement Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Lredpfev Si Szjx Acpsk Functional description: 1. Loading the autoclave with wood 2. Creating pre-vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalisation 8. Creating post-vacuum / drying 9. Pressure equalisation 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of a customer, ex location near 5020 Salzburg (Austria), without dismantling, transport, or installation Dismantling, loading, and transport by us available on request Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as-is Technical information, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; it applies: "purchased as inspected" Pictures and videos serve as samples and do not reflect the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table Lrodpfx Acou Agh Sspek 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location