Vielos erodavimo mašina

AGIE Classic 2S

Sąlyga: naudotas, Gamybos metai: 2003, Wire EDM Machines / EDM Travel X: 350 mm Travel Y: 250 mm Travel Z: 256 mm Njdpfxow Ekr Ie Aduedd Max. workpiece size X: 750 mm Max. workpiece size Y: 550 mm Max. workpiece size Z: 250 mm Max. workpiece weight: 450 kg with automatic wire threading

Sąlyga: naudotas, Gamybos metai: 2006, CNC Heidenhain TNC530 X/Y/Z travel: 1,500/800/1,000 mm Swivel axis: 0-180° Ndsdpfxewutxio Aduod A-axis C-axis B-axis Max. workpiece weight: 1,500 kg Machine weight: 18,000 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, AGIECUT Classic 2S Year of manufacture: 2001 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (in water bath) / 450 kg (without water bath) Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Ndedpjv Dkvrjfx Adusd Incl. AGIEJOGGER hand-held box for convenient setup AGIE HSS-C generator AGIEVISION control unit Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and thoroughly overhauled upon receipt of order. Afterwards, a test cut is performed with optimal surface quality for acceptance. You receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Sąlyga: geras (naudotas), Gamybos metai: 2003, In good technical condition and fully operational. Year of manufacture: 2003. X-axis travel: 350 mm. Y-axis travel: 250 mm. Z-axis travel: 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm x H 2305 mm. Machine weight: approx. 2600 kg. Ndjdeu Tq Hwspfx Adujd

Sąlyga: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 200 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 700 mm, - Milling head/spindle overhauled in 2022 for €28,000 - Heidenhain iTNC530 CNC control - NC swiveling milling head: B-axis: full NC axis A-axis: horizontal/vertical - NC rotary table (C-axis) - 72-position automatic tool changer - Chip conveyor - Electronic handwheel - Coolant system (internal coolant supply 20 bar) Ndjdpfxsrz I Hbs Adusd Technical details: X-axis travel (longitudinal): 1200 mm Y-axis travel (cross): 600 mm Z-axis travel (vertical): 700 mm C-axis rotary table: 360° B-axis: +/-90° Rotary table size: 800 mm Spindle taper: SK40 Spindle speed range: 0–6300 rpm Number of tool positions in ATC: 72 Spindle drive motor (100% / 40% duty cycle): 17 / 25 kW Approx. machine weight: 9000 kg Technical data, accessories, and machine description are non-binding.

Sąlyga: naudotas, Gamybos metai: 2004, Wire EDM Machines / EDM Travel X: 350 mm Travel Y: 250 mm Travel Z: 256 mm Max. workpiece size X: 750 mm Ndodpswf I Imefx Aduod Max. workpiece size Y: 550 mm Max. workpiece size Z: 250 mm Max. workpiece weight: 200 kg Cutting in water bath Chiller The machine has been serviced annually by the manufacturer.

Sąlyga: naudotas, TECHNICAL DATA - Maximum workpiece dimensions: 650 x 420 [mm] - Maximum workpiece thickness: 160 [mm] - Maximum weight: 350 [kg] - Axis travel (X, Y, Z): 320 x 220 x 180 [mm] - Table feed rate: 900 [mm/min] - Wire feed speed: 0 - 10 [m/min] - Wire tension: 80 to 2500 [g] Ndsdpfx Adsuhcbceujd - Wire guide diameter: Ø 0.25 [mm] - Tank capacity: 260 [l] - Machine dimensions: 3,200 x 2,200 x 2,000 [mm] - Weight: 1,900 [kg] EQUIPMENT - CNC FANUC 16W control unit - Cooling unit - Lubrication tank with pump - Automatic wire threading

Sąlyga: naudotas, Gamybos metai: 2001, Technical data: Tool holder: SK 40 Travel distances: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. tool weight: 260 kg Spindle speed: 12,000 rpm Max. table load: 380 kg Weight, approx.: 6,500 kg Dimensions (LxWxH), approx.: 2,000 x 2,200 x 2,400 mm Njdpfxot Hr Aho Adujdd Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France)

Sąlyga: geras (naudotas), Gamybos metai: 2008, 1 used surface grinding machine Make: Elb Model: Smart NG STC Serial No.: 511210608 CNC control: Siemens, type Simatic Multipanel Touch Magnetic chuck: 400 x 600 mm Hydraulic table drive, table speed 2 - 30 m/min Table load capacity (magnetic plate): 400 kg Grinding area (L x W x H): 600 x 400 x 475 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle drive: 4.3 kW Grinding spindle taper: 36 mm Maximum vertical travel: 475 mm Maximum cross travel: 370 mm Nedpfx Asv T Rhajduodd Machine weight: 3,800 kg Machine dimensions (L x W x H): 2,750 x 2,050 x 2,150 mm Electronic handwheel for Y/Z axis Dressing unit with dressing compensation and diamond dresser, height-adjustable by 22 mm Wet grinding system with coolant pump, 50 l Automatic paper band filter, 60 l Travel measurement on Y/Z axis via rotary encoder

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2000, Allgemeine Daten Abmessungen Breite 6000 mm Abmessungen Tiefe 7000 mm Abmessungen Höhe 3000 mm Maschinengewicht 12200 kg Steuerung Hersteller HEIDENHAIN Modell TNC 426 Ndodowygn Ispfx Adued Hauptantrieb Drehzahlbereich der Spindel 8000 U/min Spindelmotorleistung 15 / 10 kW Werkzeugaufnahme SK 50 Anzahl Achsen 4+1 Verfahrwege X-Achse Verfahrweg 1250 mm X-Achse Eilgang 40 m/min Y-Achse Verfahrweg 880 mm Y-Achse Eilgang 40 m/min Z-Achse Verfahrweg 800 mm Z-Achse Eilgang 40 m/min Tisch Anzahl T-Nuten 9 Tischbelastung 2000 kg Werkzeuge Anzahl Stationen 30 Maximales Werkzeuggewicht 20 kg Maximaler Werkzeugdurchmesser 110 mm Maximale Werkzeuglänge 420 mm Medien Späneförderer Ja Zusätzliche Ausstattung Dokumentation Kühlmittelsystem Hochdruck-Kühlung (40 bar) Kühlung durch die Spindel Elektronisches Handrad 90° schwenkbarer Fräskopf (H/V) 30-fach Werkzeugmagazin Messtaster M&H RMP 2000 Hydraulikanlage Ölnebelabsaugung Diese 5-Achs-Fräsmaschine DECKEL MAHO DMU 125 P hi-dyn wurde im Jahr 2000 gebaut. Sie verfügt über eine Heidenhain TNC 426 Steuerung, einen schwenkbaren Fräskopf sowie einen NC-Rundtisch mit 360° B-Achse. Die Hauptspindel bietet bis zu 8.000 U/min bei einer Leistung von 15 kW. Zum Lieferumfang gehören ein 30-fach Werkzeugmagazin und eine Hochdruck-Kühlmittelanlage. Wenn Sie hochwertige Fräsleistungen suchen, sollten Sie die DECKEL MAHO DMU 125 P hi-dyn in Betracht ziehen, die wir aktuell zum Verkauf anbieten. Kontaktieren Sie uns für weitere Informationen. Einsatzbereiche Fräsen