Vielos EDM mašina

AgieCharmilles Spirit 3

Sąlyga: geras (naudotas), Gamybos metai: 2004, Spindle bore: 60 mm Cjdpfjwbvhajx Admjaa Turning length: 280 mm Control system: Siemens 840 D Main spindle speed: 6300 rpm Drive power (spindle motor): 3.3 kW Turret 1: Disc turret Number of tools in turret 1: 8 Tool system: DIN 69 880 / 25mm X-axis travel: 90 mm Z-axis travel: 280 mm Feed force: 5500 N Rapid traverse: 24 m/min Milling spindle drive power: 5.000 kW Turret 2: Dovetail turret Number of tools in turret 2: 6 X-axis travel: 81 mm Z-axis travel: 80 mm Feed force: 5500 N Rapid traverse (X-axis): 16 m/min Rapid traverse (Z-axis): 24 m/min Machine weight: approx. 2.5 t Space requirement: approx. 6.0 x 2.0 x 2.0 m The INDEX ABC is a compact CNC lathe for short-turned parts made from bar stock. It features a slant-bed design with two independent turrets. The upper turret is mainly designated for internal machining and cut-off-side operations, while the lower turret handles external machining. This turret configuration allows for collision-free operation and simple programming with high tool availability. The large open working area promotes optimal chip flow. Working area features two turrets: "Turret 1": - Disc turret with 7 radially arranged tool positions Ø 25 mm DIN 69880 and one position for the reinforced synchronized spindle at turret station 8. With an adapter, tools with 1'' shanks may also be used. The turret head is prepared for the V-guide system. - Synchronized spindle for backworking, allowing simultaneous parallel machining with the main spindle. Collet chuck Ø42 or 3-jaw gripper chuck for internal and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-drilling unit. Starting from the center of the working spindle in a clockwise direction, three stationary back drilling tools are arranged. These are located on the pitch circle of the synchronized spindle. Backworking takes place simultaneously to main spindle machining. Two additional tools can also be mounted and may be fitted with driven tool units. "Turret 2": - Turret with 6 symmetric dovetail tool holders, each station equipped with two mounting bores for cylindrical shank tools. The following tool systems can be used: - Stationary tools moveable in the Z-direction - Driven tools with Ø25 mm cylindrical shank (two positions per station can be equipped) - Including bar feeder LM 3200 - + various accessories (various diameter guide bushings/tool holders) Technical data: - Bar material diameter: (Ø 25 / Ø 36 / Ø 52) --> Round: Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> Square SW: Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> Hexagon SW: Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> Octagon SW: Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> Maximum bar length: 3200 mm --> From Ø 25 mm bars: minimum. 2,500 mm --> Up to Ø 25 mm bars: minimum. 1,500 mm --> Bar tray capacity = approx. 300 = 6 x Ø 52 mm bars Mass (bar feeder): 700 kg

Sąlyga: geras (naudotas), Gamybos metai: 2003, X ašies eiga: 3 900 mm, Y ašies eiga: 920 mm, Z ašies eigos atstumas: 820 mm, greitas poslinkis X ašimi: 100 000 m/min, greitas poslinkis Y ašis: 60 000 m/min, greitasis eiga Z ašyje: 60 000 m/min, ruošinio svoris (maks.): 2 200 kg, stalo plotis: 900 mm, stalo ilgis: 4 200 mm, 5 ašių apdirbimo centras DECKEL MAHO – DMF 360 Linear HSK-A63 velenas Švytuoklinis ekranas Gamybos paketas IKZ 40 bar Filtro našumas: 23 l/min Aušinimo skysčio bakas: 900 l Paskutinis DMG remontas 2023 m., 11 000 EUR vertės X ašis: 3900 mm Y ašis: 920 mm Z ašis: 820 mm B ašis: 108° Stalo ilgis: 4200 mm Stalo plotis: 900 mm Stalo apkrova: 2200 kg X ašies pastūma: 100 000 mm/min Y ašies pastūma: 60 000 mm/min Z ašies pastūma: 60 000 mm/min Csdpfxsw Rdyho Admeaa Įrankio tvirtinimas: 63 ISO/Bt/Mk Veleno galia: 35 kW Sukimosi greitis: 18 000 aps./min Įrankių keitiklis: 30 vnt. IKZ: 40 Valdomų ašių skaičius: 3+1 Drožlių transporterio: Taip Aušinimo įreng: Taip Ilgis: 8 500 mm Plotis: 3 450 mm Aukštis: 2 910 mm Svoris: 30 700 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2015, veikimo valandos: 985 h, X ašies eiga: 905 mm, Y ašies eiga: 705 mm, Z ašies eigos atstumas: 455 mm, ruošinio svoris (maks.): 3 000 kg, EDM314MF30 – SLM (Second Life Machine) Complete Overhaul Traverse Paths X x Y x Z: 900 x 705 x 455 mm Machine Table: 1150 x 850 mm Tank Size: 1200 x 900 mm Distance Table/Chuck: 260/710 mm Electrode Weight: 50/500 kg Max. Workpiece Weight: 3,000 kg Overall Machine Dimensions: 2210 x 3450 x 3250 mm Power Connection: 400V/three-phase/50/60 Hz Tank Height: 750 mm Equipment: Control Interface MF30 Movable Control Panel Touch Screen Display Lifting Speed: 15,000 mm/min (Highjump) EDM Generator 60A Integrated Chiller Cartridge Filter System 8-Station Tool Changer C-Axis with Direct Measurement, Resolution 0.0001° C-Axis for Positioning, Rotational, and EDM Applications C-Axis Speed: 100 rpm Automatic Tank Level Control Filling, Filtering, and Flushing Pump Cedpshfaizsfx Admeaa Transport Installation/Commissioning Training 12 Months Warranty

Sąlyga: geras (naudotas), Gamybos metai: 2014, Hurco VMX 84 T, Year of manufacture: 2014, Control: WinMax, Travel paths X/Y/Z: 2135/860/760 mm, Tool changer: 40 positions, Spindle taper: SK 40, Spindle speed up to 18,000 rpm, Internal high-pressure coolant supply, Simulation graphics, Electronic handwheel, Casdpfjv S Twuox Admja Pocket milling with islands, DXF software, 3D infrared measuring probe,

Sąlyga: naudotas, Gamybos metai: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum spindle speed: 8000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 axis travel: 320 mm X1 axis travel: 50 mm Y1 axis travel: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool Mounting Slide 1: Number of tools Fixed with 16 x 16 mm tool shank: 5 pieces Slide 2: X2 axis travel: 165 mm Z2 axis travel: 200 mm Rapid traverse speed: 30 m/min Caodotzyx Tjpfx Admea Ball screw diameter: 30 mm Tool Mounting Slide 2: Number of stations with revolver and integrated spindle: 8 stations Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder - 5-position tool holder plate for Slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub spindle - 2 double drill holders for rear machining support with cylinder - Sub spindle part ejector

Sąlyga: paruoštas naudoti (naudotas), Travel distances X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm–0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Codpjuqackofx Admjaa

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, STAR SH-12 CNC Sliding Head Lathe TECHNICAL DATA Turning diameter: 13 mm Spindle stroke: 140 mm Spindle speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in turret: 3 Machine dimensions: 1500 x 950 x 1650 mm Weight: approx. 950 kg SCOPE OF DELIVERY Including (not a complete list): - STAR SH-12 CNC lathe - Bar feeder Cjdpfxjvllmhe Admjaa - Coolant pump - Transformer Exact scope of delivery as per photo documentation. We do not guarantee the accuracy, completeness, or timeliness of the information provided.

Sąlyga: naujas, Gamybos metai: 2025, Cutting range 90° round: 260 mm flat: 300 x 260 mm minimum diameter: 5 mm Cjdpfxsh Tnd Aj Admoaa NC-controlled, automatic material feed with hydraulic full-stroke clamping Easy operation via NC control with plain text display Material pre-feed function without reclamping for short sections Robust, linear-guided feed gripper with servo positioning for maximum precision Automatic adjustment of blade guide to material width Recommended options: powered chip brush, synchronized with blade speed separate operator console 7" CE panel, network-capable, up to 1,000 data records storable, event log for various functions and data, etc.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, TECHNICAL DETAILS CNC Control: MSX 711III MAPPS IV (FANUC) X axis (mm): 730 Y axis (mm): 510 Z axis (mm): 510 B axis (mm): +160 / -180 C axis (degrees): 360 Number of pallets: 1 Table size: Ø500 Table load capacity (kg): 300 Cutting feed rate (mm/min, X, Y, Z): 50,000 / 50,000 / 40,000 Max. rapid traverse (m/min, X, Y, Z): 50 / 50 / 40 Spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Spindle taper: BT-40 Cjdpfowv Sguex Admjaa Torque (Nm): - Tool changer type: Chain Number of tool positions: 122 Max. tool diameter (mm): 90 Max. tool diameter with adjacent pockets empty (mm): 125 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): 750 INCLUDED EQUIPMENT Rotary table with digital readout units Through-spindle coolant Electronic handwheel integrated in CNC panel Main advantages of included FANUC options: - Enhanced control power and stability: Allows simultaneous management of all 5 real axes with maximum smoothness and precision, maintaining performance even during complex machining tasks. - Expanded memory and advanced program management: Can store up to 1,000 programs, ideal for production environments with multiple part references or short series runs. - Customized interpolations and macros: Facilitate programming of special paths, automatic cycles, and subroutines tailored to operator needs, reducing setup time and errors. - High-speed and maximum precision processing: Optimized FANUC control delivers smoother movements, less vibration, and superior dimensional accuracy, especially in 5-axis simultaneous operations. - Full compatibility with automation systems: The system is prepared for operation with EROWA or other automatic pallet changers, ensuring easy integration into automated lines or robotic cells. MACHINE DIMENSIONS Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 Cajdpfx Aouhaxxedmea MAIN SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 10,000 rpm SUB SPINDLE - Z travel: 140 mm BUSHING HOLDER 1 - Number of positions: 5 COUNTER OPERATION - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 3 x 380 V - Total drive power: 3.5 kVA EQUIPMENT - Control unit: Fanuc 21iT - Parts removal device - Coolant tank * with high-pressure pump - Bar feeder: LNS Alpha 320