Kranas vienos sijos tiltinio kranas

ABUS Hallenkran Laufkran 5 t x 20,7 m - Deckenkran

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Iiedjt Hw Shjpfx Afned Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Būklė: beveik kaip naujas (parodų įrenginys), FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package, standard from 1.5 m ➤ Fronius carriage ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator With this unit, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It features filler wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in bodywork applications. Iodpfx Afowbknbensid Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further expanding the functions of the TPS unit. ----- IMMEDIATE DELIVERY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For clarification: we purchase nearly new used units, disassemble them, check everything thoroughly, replace any wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean and have neither burn marks on the displays nor numerous burn holes or dents distributed over the unit! You buy from us an item that is presentable and does not look completely worn out! ►►►Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash upon personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the units on site and pay in cash. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – Fronius only, no other brands! We are experts with these units and never sell anything we are not familiar with.

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Isdpefxpbmefx Afnsid

Gamybos metai: 2023, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, 1x BKRS portalo kranas Darbinė apkrova: 2 x 20 000 = 40 000 kg Tarpuašis: 29 m Išsikišimas: 2 x 8,9 m Kėlimo aukštis virš bėgio: 10 m Kablio eiga: 13,5 m Radijo valdymas Kabelio ritė skirta 90 m Pilnas su UIC60 krano bėgiu, ilgis: 2x 180 m Iisdpfxsyx Dv Ts Afned

Gamybos metai: 2007, būklė: geras (naudotas), Danobat CNC Bohr-/Sägeanlage – Baujahr 2007 Einzelner rotierender Bohrspindel. 18 Meter Einlaufrollenbahnen. 12 Meter Auslaufrollenbahnen. Pinchereinheit für den Vorschub. Quertransfers am Einlauf. Quertransfers am Auslauf. Isdpfjig T Amox Afnjid Kapazität: 750 mm. Sägekapazität: Runde Schnittkapazität (ohne vertikale Spannbacken, Winkel 0 Grad): 520 mm. Rechteckige Schnittkapazität (ohne vertikale Spannbacken, Winkel 0 Grad): 700 mm x 500 mm. Maximale Kapazität mit vertikalen Spannbacken: 700 x 500 mm. Runde Schnittkapazität bei 45 Grad Drehung: 450 mm. Rechteckige Schnittkapazität bei 45 Grad Drehung: 450 x 500 mm.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, keliamoji galia: 6 300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is model CXTS (single-girder bridge crane / profile girder) and is in excellent condition. PLEASE NOTE: The crane shown in the listing pictures has already been sold. However, an identical crane is available, though it will not be available until the end of 2026. TECHNICAL DETAILS - Load capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 - Hoisting speed: 4.0 / 0.7 m/min (2 speeds) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: trolley weight: 440 kg; crane weight without trolley: 1,832 kg - Classification: crane class: S3 (DIN 15018); hoist mechanism group: FEM 2m (ISO M5); crane drive mechanism group: FEM 1Am (ISO M4) - Electrical data: power supply: 400 V / 48 V / 50 Hz, rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional moveable control system (emergency control) - Overload protection and load spectrum storage - Pre-limit and end-limit switches for crane and trolley travel - Signal horn, battery charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm Iiodpfx Aoykbimjfnsd - Girder profile height: 622 mm - End carriage width (wheelbase): 2,200 mm Transport and loading can be organized Europe-wide, subject to an additional charge, upon request. Prices are exclusive of VAT. Viewing is possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, visit us on our website.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Pressing force: 60.0 t Bending length: 1,270 mm Frame width: 1,000 mm Throat depth: 410 mm Ram speed: 160 mm/sec Working speed: 10.0 mm/sec Return speed: 165 mm/sec Stroke: 275 mm Installation height: 530 mm Table height: 900 mm Table width: 90.0 mm Backgauge – adjustable up to max. 800 mm Oil capacity: 150 l Operating voltage: 400 V Motor power: 7.5 kW Weight: 4,320 kg Dimensions (L x W x H): 2,250 x 1,960 x 2,750 mm Demonstration / Demo machine (!!) From our showroom (like NEW), with very few operating hours The ERMAK POWER BEND PRO press brake is an extremely versatile, productive, and precisely controlled machine, available in various bending lengths from 1,270 mm up to 6,000 mm. It offers a wide selection of pressing forces from 40–400 tons to meet your individual requirements. This CNC-controlled press brake can also be expanded as a tandem machine, providing great flexibility in bending length. It comes equipped with numerous features to ensure simple and safe operation. The robust machine design, combined with precise CNC control, guarantees long-lasting and reliable performance. Additionally, the machine offers a variety of expansion and equipment options to tailor it to your specific needs. The DELEM DA CNC graphic control enables convenient operation via touchscreens and provides a comprehensive safety package. The machine is easily operated via an LCD touchscreen mounted on the left swivel arm. Bending operations are initiated by pressing a footswitch. In addition to this safety feature, the operator is protected by a safety laser in the working area and a light barrier at the rear. The CNC controller automatically calculates the pressing force, bending tolerance, crowning adjustment, embossing force, and tool safety zones. ----- POWER BEND PRO CNC Press Brake with Special Features: * "ERGO" configuration – knee clearance for the operator * Flexible articulated mounting arm for the controller * Increased installation height * Extended cylinder stroke * Increased bending beam speeds ----- Iiedpfx Afexabt Aenjd Features: - CNC electro-hydraulic press brake - DELEM CNC controller model "DA-58T" graphic/touchscreen * 2D graphic programming * 15" TFT color display with high resolution * Bending sequence calculation * Product programming and life-size display * USB interface - CNC controlled axes: Y1 – Y2 – X – R - CNC electro-motorized backgauge * Backgauge with R-axis, on ball screw spindles * Travel ranges: X = 800 mm // R = 250 mm * Travel speed X-axis: 230 mm/s * With 2x manually adjustable stop fingers - ROLLERI gooseneck top tool "PS 135.85-R08", System "A" * Including quick-clamping system * Including crowning device in the tool holder - ROLLERI segmented universal die block "M 460 R" * Including 1x die shoe "C 1050-R" - Rear safety device: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: B0502A0308, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 1 520 h, spaudimo jėga: 85 t, bendras svoris: 7 800 kg, valdiklių gamintojas: KEBA, valdiklio modelis: TASC 6000, valdymo tipas: CNC valdymas, Įranga: CE žymėjimas, dokumentacija / vadovas, Parduodu naudotą lankstymo presą TRUMPF TruBend 5085X, pagaminimo metai 2008. Mašina puikios techninės būklės – KAIP NAUJA! 2026 m. sausį TRUMPF Polska servisas pakeitė visus filtrus ir alyvą, atliko kalibravimą, patikrino darbo tikslumą, atliko saugos bandymus. Ijdpsy Hpnqefx Afnjid Labai maža darbo valandų skaičius – tik 1912 hidraulinės sistemos darbo valandų! Hidraulika: Hoerbiger Pagaminimo metai: 2008 Maksimali spaudimo jėga: 850 kN Darbo ilgis: 2210 mm Galia: 17 kW Įtampa: 400 V Hidraulinės alyvos bako talpa: 120 l Hidraulinės sistemos slėgis: 300 bar Svoris: 7800 kg Įrankių tipas: hidrauliniai Wila / Trumpf Valdymas: TASC 6000 Padidintas montavimo aukštis 5 ašių galinis atmušas – X, X5, R, Z1, Z2 Hidraulinis viršutinio įrankio WILA tvirtinimas Hidraulinis apatinio įrankio WILA tvirtinimas CNC bombiravimas BendGuard Paruošta ACB montavimui Jei turite klausimų arba reikia daugiau informacijos, prašome rašyti žinutę arba skambinti telefonu.

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), A complete CNC double-gantry plasma cutting system by MicroStep, equipped with an oxy-fuel torch for nesting, bevel cutting, and pipe processing, is available. 1) Plasma cutting machine, max. processing length: 16,500 mm, max. processing width: 2,500 mm, max. processing width including nesting station: 3,700 mm, max. material thickness stainless steel/mild steel: 20 mm/40 mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma power source. Gantry 2: fully automatic acetylene oxy-fuel torch, with provision for fitting a second torch carriage. Pipe cutting unit: pipe diameter range: 30 mm - 700 mm, max. pipe length: 16,500 mm, operating hours: approx. 15,000 h. 2) Donaldson Cyclopeel DFPRO 16 filter system, air flow: 16,000 m³/h, filter elements: 16. Documentation available. Inspection on site is possible. Expected to be available from late 2025/early 2026. Photos are from initial commissioning in 2014. Iiodpfx Aewmqwyjfned

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 84659300, Mašina susideda iš 3 darbo modulių: 1. XSV šepečiai (12 besisukančių ir osciliuojančių šepečių) Iijdpoxn Ifusfx Afnsd 2. XSV šepečiai (12 besisukančių ir osciliuojančių šepečių) 3. Volelinis šepetys Padavimo juosta 1350 mm.