Paviršiaus šlifavimo mašina

ABA EL1507

Sąlyga: geras (naudotas), tekėjimo skersmuo: 5 000 mm, Z ašies eigos atstumas: 2 000 mm, tekėjimo ilgis: 2 500 mm, The machine is in good technical condition, fully operational, and was modernized in 2008. It is equipped with a Siemens Sinumerik 802 D control system, a maximum turning diameter of 5,000 mm, and a chuck diameter of 2,500 mm. It can accommodate workpieces weighing up to 40 tons and with a height of 2,000 mm. Dwedpfx Adev Dkykemof

Sąlyga: naudotas, Gamybos metai: 1953, Turning length / mm Turning diameter over table // mm Face plate diameter / mm Face plate diameter: approx. 3600 mm Center height over table: approx. 1500 mm Turning diameter over table: 2600 mm Turning diameter in pit: 3600 mm Djdpfoua Iw Tox Admowf Turning diameter over bed: 1300 mm Turning length: approx. 2400 mm Max. workpiece weight: 22,000 kg Max. torque at face plate: 5000 mkg Pitch circle diameter of face plate ring gear: 1900 mm Main spindle bore: 120 mm Speed range: standard: 0.71–35.5 rpm increased: 1–50 rpm increased: 1.4–71 rpm Total power: 38 kW Total weight: approx. 42.5 tonnes

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Travel paths X/Y/Z: 900 x 400 x 200 mm Dedpev Irwrsfx Admswf Table size: 800 x 400 mm

Sąlyga: naudotas, Gamybos metai: 2007, Maximum gear diameter: 2000 mm Workpiece diameter: 2700 mm Table diameter: 1500 mm Maximum module: 22 Control system: 840D Rotational speed: 3.5 rpm Maximum table load: 20,000 kg Center distance: 70...1220 mm Stroke length: 30...330 mm Strokes per minute: 10...200 spm Total power requirement: 138 kW Machine weight approx.: 38 t Space requirement approx.: 11x5 m Machine: Full CNC machine with electronic hobbing synchronization for C and D axes and digital INDRAMAT drive technology. Self-rigid welded machine bed construction. Radial axis (X-axis) with hardened guideways, sliding guide with wrap-around, Longitudinal guide with recirculating roller shoes. Precision ground, preloaded ballscrew with backlash-free preloaded nut. Digital AC drive technology with backlash-free gearbox. Linear measurement system for radial positioning. Free-standing machine table with electrohydraulically backlash-free preloaded twin worm gear, segment gear diameter 1365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation. Table bore diameter 500 mm continuous, open at the bottom. Water-cooled digital AC servo motors. The machine must be installed on a foundation. Column: Machine column as highly rigid cast construction for 1200 mm axial travel. Axial axis (Z-axis) with hardened guideways, sliding guide, longitudinal guide and wrap-around with recirculating roller shoes. Precision ground ballscrew with backlash-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shaping Head: SK 4.1 with hydraulic NC servo drive for shaping spindle movement and gear cutting wheel lift-off, stroke length 330 mm, shaping spindle diameter 160 mm. Hydrostatically mounted shaping spindle, straight and side guidance of the lift-off. Maximum tool diameter: 300 mm. Drive motor power: 30 kW Number of strokes: 10 - 200 spm, stroking speed: 5 - 45 m/min. Shaping spindle speed for working and return stroke can be programmed independently. Spindle speed is constant in the cutting area. Dsdpfx Asv E R Eiedmswf Maximum gear cutting wheel speed: 10 rpm, digital AC drive technology. Gear cutting wheel lift-off direction can be manually reversed for internal and external gear cutting. Shaping spindle axis can be manually adjusted up to 50 mm off machine center to avoid return stroke collision of the gear cutting wheel.

Sąlyga: naudotas, Gamybos metai: 1999, Maximum wheel diameter: 280 mm Wheel width: 330 mm Module – max.: 5 Module – min.: 1 Control: LIEBHERR CNC Total power requirement: 28 kW Machine weight: approx. 12 t Space requirement: approx. ___ m Dsdpjt Hwu Asfx Admswf LIEBHERR CNC-controlled gear generating and profile grinding machine Model: LCS 282 Year of manufacture: 1999 #1099 Max. wheel diameter: 280 mm Module: 1 - 5 Helix angle: +/- 35° Distance table center to tool center: 15 – 285 mm Vertical grinding slide stroke: 330 mm Shift/traverse path for tool: 200 mm Min. number of teeth: 7 Grinding spindle position above table min./max.: 70 - 360 mm Workpiece clamping length: 420 to max. 620 mm Grinding worm/profile grinding wheel diameter: 145 x 210 / 175 mm Grinding worm/profile tool speed: 2,500 – 10,000 rpm Table rotation speed max.: 750 rpm Spindle drive: 28 kW Total drive approx.: 50 kW - 400 V – 50 Hz Total weight approx.: 12,000 kg Accessories / Special equipment: • LIEBHERR CNC control type LH 90 GG: easy-to-program CNC control (B+R/IPC 5000) with gear-specific user interface and diagnostic features for quick troubleshooting. (Remote diagnosis also possible) • Equipped with an automatic device for threading the grinding wheel into the tooth gap. • The machine operates with three grinding processes: a. Generating grinding using CBN grinding worms = fastest processing b. Profile grinding with CBN profile grinding wheels (one or two wheels) = highest accuracy! c. Combination of a and b (most economical solution): pre-grinding with grinding worm / finish grinding with profile grinding wheel in single-part processing • Automatic shifting of the grinding worm or automatic positioning of the profile wheel • Automatic workpiece loading device using a ring loader mounted on the counter column, which automatically moves raw and finished parts in and out. The workpieces are transported to the ring loader via a separately positioned FLEX LINK chain conveyor, picked up and removed. This enables unmanned production. • Hydraulic workpiece clamping in the table, but without clamping devices. Tailstock slide on the counter column present but without tailstock. Slide stroke up to approx. 350 mm. • Complete work area enclosure with sliding door and separate CO2 extinguishing system / IR sensor No original coolant system (as central supply), and no dressing device supplied. Condition: good to very good – powered, ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We appreciate your interest – a further 200 gear machining machines available from stock at all times.

Sąlyga: labai geros būklės (naudotas), Swing diameter over bed 320 mm Dodpfx Aji Ezhqjdmewf Centre distance 800 mm Spindle speeds up to 4000 rpm Control system: HEIDENHAIN Manual Plus M Various accessories MARCELS MASCHINEN CH

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, apatinio volelio skersmuo: 495 mm, viršutinio volo skersmuo: 515 mm, šoninio volelio skersmuo: 355 mm, volelio skersmuo: 495 mm, vėjo ilgis: 2 000 mm, darbinis plotis: 2 000 mm, plieno lakšto storis (maks.): 60 mm, bendras svoris: 29 200 kg, bendras ilgis: 5 770 mm, bendras plotis: 2 390 mm, bendras aukštis: 2 760 mm, galia: 55 kW (74,78 AG), Įranga: dokumentacija / vadovas, Tête de rouleau interchangeable 410 mm Dwsdpfjv Nhkwjx Admjf

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Technical Data: Year of manufacture: 2001, serviced in 2024 Working length: 3100 mm Dodsvy H Iijpfx Admowf Frame gap: 2650 mm Press force: 300 t CNC control: Robosoft BC55 Touch Graphic 2D Controlled axes: Y1 / Y2; X CNC crowning table Throat depth: 300 mm Stroke: 350 mm Motor power: 18 kW Dimensions (L x W x H): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: Various tools The seller is not liable for typographical or data transmission errors. The machine corresponds to its age in appearance, technology, and wear and tear; used machines are sold without any warranty.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995, x-travel 14,000 mm y-travel 5,000 mm z-travel 1,500 mm w-axis 3,000 mm Column clearance 4,000 mm Portal stand: distance table – spindle nose 4,500 mm Workpiece weight 100 t Table size – longitudinal 9,000 mm Table size – cross 3,000 mm Spindle taper ISO SK 50 Spindle speeds 2–2,500 rpm Spindle drive 113 kW Spindle diameter 200 mm Spindle torque 9,500 Nm Feed range x-axis 1–10,000 mm/min Feed range y-axis 1–10,000 mm/min Feed range z-axis 1–10,000 mm/min Rapid traverse 20,000 mm/min Dwodpfjvwgm Hsx Admsf Height above floor 8,600 mm Control SIEMENS 840C Machine weight approx. 360 t >>>retrofitted 2011

Sąlyga: naudotas, Gamybos metai: 2014, DMC DL 80V CNC Vertical Turning Machine Year of manufacture: 2014 Turning diameter: 800 mm Turning length: 750 mm Spindle: 30 kW, 2000 rpm Dodsvr Ecpjpfx Admjwf 12-position turret 21" chuck Fanuc Oi-Td control Machine weight: 9,800 kg Including chip conveyor and standard accessories