Spring Holding Kft.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, bendras svoris: 8 700 kg, ruošinio ilgis (maks.): 165 mm, ruošinio skersmuo (maks.): 35 mm, gamybos pajėgumas: 7 200 vienetas/val, TECHNICAL DETAILS Number of cavities: 6 Maximum output: 7,200 bottles/h Product dimensions Maximum preform length: 165 mm Preform diameter: 18-35 mm Neck ring diameter: 27-42 mm Maximum neck finish diameter: 38 mm Neck height: 9-27 mm Maximum bottle height: 350 mm Maximum bottle diameter: 105 mm Maximum bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow module weight: 6,300 kg Control cabinet weight: 1,200 kg Preform feeder weight: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed Power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feeding system: 28 kW Power supply Supply voltage: 230/400 V ±10 % Frequency: 50 Hz ±1 % Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8-12 °C Flow rate: max. 5 m³/h Pressure: 3-5 bar Compressed air Itodpfxjyrfvgo Agfed Air consumption at 40 bar (0.25–2 L bottle): 180-700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, Pramoninis pūstuvas VOITH FISCHER modelis VK1-07, pagamintas 1979 m., šiuo metu veikiantis. Kompaktiškų matmenų įranga, tinkama mažų talpų gamybai pučiant. Įranga naudota pramoninėje aplinkoje, galima apžiūra gamykloje Albasetėje (Ispanija). Iedpfx Aeyn Iuwogfetd Grynoji kaina EXW Albacete. Kaina derinama.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Pramoninis pūtiklis BATTENFELD FISCHER VK1-1 modelis, 1988 metų, šiuo metu veikiantis. Vienos stoties mašina, naudojama pramoninei pakuočių gamybai pūtimo būdu. Veikianti įranga, galima apžiūrėti gamykloje Albacete (Ispanija). Iodpfx Ajyn Itysgfetd Grynoji kaina EXW Albacete. Kaina derinama.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, Pramoninis pūstuvas VOITH FISCHER modelis VK1-2, dvigubas, pagamintas 1979 m., šiuo metu veikiantis. Įrenginys naudotas pramoninei gamybai Rosa Envases (Albacete). Dvigubos stoties konfigūracija talpų pūtimo procesui. Itsdpeyn In Dofx Agfjd Įranga veikia ir galima apžiūrėti gamykloje.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, veikimo valandos: 48 400 h, 1,0 vnt naudota pūtimo formavimo mašina Gamintojas: Fischer - W. Müller Tipas: FMB 3-120 Pagaminimo metai: 1999 Uždarymo jėga: 120 tonų Ekstruderio tipas: 120/24 WT Kaupiamoji galva: BFKS25, maždaug 17,75 kg Isdpfx Aoynutmogfotd Su šia mašina galima gaminti statines iki 200 litrų talpos. Galimas vaizdo įrašas!

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2020, veikimo valandos: 50 h, Funkcionalumas: visiškai funkcionalus, varžto skersmuo: 65 mm, bendras svoris: 2 000 kg, bendras plotis: 1 200 mm, bendras ilgis: 3 240 mm, bendras aukštis: 2 500 mm, galia: 35 kW (47,59 AG), Įranga: dokumentacija / vadovas, HDPE, PP ir kt. ekstruderis. Įsigytas 2020 m. Veikimo laikas tik keletas valandų – būklė kaip nauja. Vakuuminis padavėjas -> džiovinimo bunkeris -> vandeniu aušinamas žiedas -> ekstruderio cilindras -> 4 šildymo/aušinimo zonos vamzdžiui -> šildoma filtro zona -> šildomas, varikliu valdomas dozatorius. Siemens dažnio keitiklis reguliuojamam greičiui. Kintamo greičio pavarų siurblys gale – tiksliam plastiko dozavimui preciziškesnėms užduotims ir geresniam nuoseklumui. 38CrMoAlA, azotu dengtas, 65 mm skersmens sraigtas su 30:1 ilgio ir skersmens santykiu. 33~kW maks., 380-415V, 3 fazės. Iodpfx Ajyh Nzcjgfetd Šiuo metu laikomas sandėliuke, prijungtas, todėl galima pamatyti veikimą nuotraukose (prisegta).

Būklė: naujas, Gamybos metai: 2025, veikimo valandos: 150 h, Funkcionalumas: visiškai funkcionalus, galia: 35 kW (47,59 AG), Parduodama preformų pūtimo mašina su automatiniu padavimu, 4 ertmės, 3500-4000 vnt./val., talpoms iki 0,6 l, kaklelio diametras 38 mm, didžiausias diametras 65 mm, didžiausias aukštis 230 mm, 35 lempų, vidutinės energijos sąnaudos 22 kW, žemo slėgio oro sąnaudos 1600 l/min, pūtimo slėgis 25-35 kg/cm², aukšto slėgio oro sąnaudos 2500 l/min, komplekte chilleris 5600 kcal/val. ir 30 l/min. Matmenys: 3,7 x 1,95 x 2,1 m Svoris: 3700 kg Itjdsyhh Nuepfx Agfed

Būklė: naudotas, Gamybos metai: 2000, mašinos/transporto priemonės numeris: SO126, Used HDPE Extrusion Blow Moulding Machine for 10 L – 300 bph – Overview Used Uniloy Milacron HSM10/D extrusion blow moulding machine for producing HDPE containers up to 10 litres. Featuring a single parison head and robust clamping system, this EBM unit is ideally suited for industrial packaging and beverage production applications (e.g., water canisters, edible oils), and can be integrated into a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Key Data Brand/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Moulding (EBM), Single Station Material: HDPE Number of Cavities: 1 Maximum Container Volume: 10 L Indicative Output: up to approx. 300 bph on 10 L (application-dependent) Manuals: Included Item No.: SO126 Extruder Screw Diameter: 100 mm; L/D 24 Screw Speed HDPE: 0–70 rpm Plasticising Capacity (HDPE): approx. 300 kg/h Main Extruder Motor: 89 kW Heating Zones: 6; Barrel Heating Power: 31.4 kW Motor Cooling Power: 0.58 kW; Barrel Cooling Power: 1 kW Parison Head Type: PE 1/200, single parison Max. Die Diameter: 200 mm Head Heating Power: 14.2 kW Parison Thickness Control: Hydraulic (wall thickness programming) Clamping & Blow Unit Clamping Force: 200 kN Max. Mould Size: 650 × 500 mm (H) Mould Thickness: 2 × 150 mm Mould Opening Stroke: 300 mm Horizontal Carriage Stroke: 660 mm Blow Pin Stroke: 240 ± 5 mm Blow Pin Thrust at 50 bar: 320 kg Electrical Ijdpfxeyhbt Ho Agfjtd Installed Power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic System Tank Capacity: 400 l Pump Flow (1470 rpm): 123 l/min Max. Pressure (main circuit): 190 bar Main Hydraulic Motor: 37 kW; Oil Cooling Motor: 1.5 kW Pneumatics Operating Pressure (general): 6–8 bar; Air Consumption: 2000–2500 Nl/min Post-cooling Pressure: 6–8 bar; Air Consumption: 1000–1500 Nl/min Cooling Water Tool Circuit: 8–12 °C; Flow 15 m³/h Extruder & Hydraulic Oil: 10–24 °C; Flow 4 m³/h Dimensions and Weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall thickness control for precise parison management, improving weight distribution and top-load performance on 10-litre containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control via six extruder zones and heated head, ensuring stable processing at conversion temperatures up to 300°C. Locked safety guards and emergency stop switches for o...

Būklė: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: SO133, Technical Specifications & Performance Data The SIPA SFR EVO3 is a rotary stretch blow-molding machine designed for highly efficient production of PET bottles in modern beverage plants. As a robust pre-owned unit for industrial packaging, it provides reliable performance for beverage production lines seeking consistent quality and throughput. The machine features an 8-cavity configuration and supports a wide range of bottle sizes commonly used in the water and soft drinks sector. Manufacturer: SIPA Model: SFR EVO3 Year of manufacture: 2017 Production speed: up to 18,000 bottles per hour Number of cavities: 8 Neck finish: PCO 28-1810 Bottle formats: Compatible with 0.5L, 1.0L, 1.5L formats Container type: Designed for handling PET bottles Bottle diameter (min–max, diagonal): 50–125 mm Bottle height (min–max, without neck): 80–349 mm Advanced Automation & Control Systems Engineered for consistent output, the SFR EVO3 integrates advanced automation with precise preform heating and controlled blowing cycles. Operator-friendly HMI and PLC-based control support recipe management, process monitoring, and format changeovers. The machine architecture emphasizes repeatability of pre-blow and blow phases, ensuring stable bottle quality at high-speed production rates. Automated process control with user-oriented HMI Efficient preform heating for uniform material distribution Quick-change functions for format adaptations Safety-interlocked guards and emergency stop switches for operator protection Integration Capability in Production Lines This blow molder integrates seamlessly into used PET filling lines, either as a stand-alone unit ahead of a filler or synchronized within a complete beverage production line. Supplied preform feed and preform cooling systems ensure smooth infeed and stable production conditions, enhancing overall line efficiency. Itodpfxeyhbiho Agfod Inline or stand-alone operation via standard conveyor interfaces Compatible with downstream filling, capping, and labeling equipment Flexible handling for 0.5L, 1.0L, and 1.5L formats Suitable for upgrades or capacity expansions in used packaging machinery Machine Condition & Maintenance History The machine is currently in operation, demonstrating readiness for deployment in an active production environment. Built in 2017, it offers a modern platform for operators seeking reliable performance and reproducible quality in PET bottle manufacturing. As a functional used machine, it is a strong candidate for rapid implementation in industrial packaging lines. Performance & Versatility With 8 cavities and up to 18,000 bph, the SFR EVO3 combines speed and quality for demanding beverage operations...

Būklė: naudotas, Gamybos metai: 2010, veikimo valandos: 39 000 h, mašinos/transporto priemonės numeris: SO134, Technical Data & Performance Specifications This Nissei ASB ASB-50MB is a single-stage, biaxially oriented stretch blow molding machine for precise PET bottle production. As a compact, rotary index platform, it integrates injection molding and stretch blow molding in a single cycle, ensuring accurate neck finishes and uniform wall thickness distribution. This used machine offers reliable performance for beverage production and industrial packaging projects seeking a proven, cost-effective solution. Manufacturer: Nissei ASB Engineering Model: ASB-50MB Year of manufacture: 2010 Process: Single-stage ISBM (Injection-Stretch-Blow Molding) Production speed: approx. 1,000 bottles/hour (bph) with 4 cavities Cavities: Current configuration 4 (machine supports 1–6 cavities depending on application) Bottle formats: 40 ml to 750 ml Container type: PET bottles Electrical data (nameplate): Heater 400 V AC, 6.1 kW; Motor 380 V AC 18.5 kW and 200 V AC 0.75 kW; 50 Hz Installed power (approx.): 25.35 kW Advanced Automation & Control Systems The ASB-50MB platform offers stable, repeatable operation with synchronized control of injection, conditioning, stretching, and blowing stations. Its rotary indexing table ensures precise timing coordination between stations and supports high-quality bottle forming with a small footprint. Operator interfaces facilitate routine adjustments and process monitoring, while integrated heating controls deliver precise temperature profiles for consistent preform conditioning. Rotary index single-stage system with coordinated station control Separate heating section for precise thermal management Structured power supply at 50 Hz for stable operation Designed for fast mould and format changes within the compatible size range Itedpfsyhbf Asx Agfod Integrated safety guards and interlocks for secure machine access Integration into Production Lines This stretch blow molding machine can be seamlessly integrated into a used bottling line or operated as a standalone PET container production unit. Its output can feed conveyors to downstream rinsing, filling, capping, and labeling machines for beverage production and other industrial packaging applications. Standalone or inline configuration with downstream filling systems Compatible with standard conveyor interfaces Format flexibility for 0.04 L to 0.75 L PET bottles Suitable for water, juices, carbonated soft drinks (CSD), and other PET applications in combination with appropriate downstream systems Machine Condition & Maintenance History This used ASB-50MB is in operational condition. The machine has approximately 39,000 operating hours, which corresponds to typical industrial use, and still maintains robust performance potential for new production environments. Operational status: ready for operation Operating hours: approx. 39,000

Būklė: naudotas, Gamybos metai: 2006, veikimo valandos: 33 000 h, mašinos/transporto priemonės numeris: SO135, Technical Data & Performance Specifications This single-stage, biaxially oriented stretch blow molding machine delivers consistent PET bottle production with reliable throughput in a compact footprint. Manufactured by ASB INTERNATIONAL PVT. LTD. (Nissei ASB engineering), the ASB-50 MB integrates injection molding, conditioning, and blow molding in one machine, thereby reducing material handling and improving quality control—ideal for a used bottling line seeking a dependable supply of PET bottles. Manufacturer: ASB INTERNATIONAL PVT. LTD. (Nissei ASB) Model: ASB-50 MB Machine type: Single-stage, biaxially oriented stretch blow molding machine Year of manufacture: 2006 Production speed: ~1,000 bottles/hour with 4-cavity mold Cavities: Configurable 1–6; supplied in 4-cavity configuration Itsdpsyhbfijfx Agfod Formats: 40 ml to 750 ml (typical PET bottle sizes within this range) Containers: PET bottles Power supply: 400 V, 50 Hz Installed power (observed): approx. 20.1 kW Motor circuits: 380 V AC — 13.5 kW; 200 V AC — 0.5 kW Heating circuits: 400 V AC — 6.1 kW Advanced Automation & Control Systems The ASB-50 MB architecture allows precise control of heating and stretch blow parameters, ensuring consistent bottle quality across various formats. Typical single-stage controls coordinate injection, conditioning, and blow stations for reproducible results, with safety interlocks and guarding to protect operators. The quick-change mold system supports efficient format changes and minimizes downtime during product changeovers, as is common in industrial packaging and beverage production environments. Integration Capability in Production Lines Designed for PET bottle production upstream of filling, capping, and labeling machinery, this machine integrates effectively with conveyors, accumulation tables, and downstream bottling equipment. The single-stage process eliminates the need for separate preform handling equipment (such as unscramblers, tippers, and elevators), simplifying the line layout in a used bottling line. Format flexibility from 40 ml to 750 ml supports applications for water, juice, carbonated soft drinks (CSD), and other beverages when equipped with the appropriate tooling. Machine Condition & Maintenance History This used machine is offered in operational condition and suitable for immediate integration into an existing beverage production or packaging facility. As with any used stretch blow molder, commissioning checks and routine maintenance are recommended to adapt installation to local utility conditions and product specifications. Operational Performance & Versatility The ASB-50 MB delivers stable operation at about ~1,000 bph in a 4-cavity configuration, with reconfiguration options for up to 6 cavities depending on mold sets and process parameters. ...

Būklė: naudotas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HY-43, varžto skersmuo: 110 mm, bendras plotis: 2 500 mm, bendras ilgis: 8 500 mm, bendras aukštis: 9 500 mm, galia: 350 kW (475,87 AG), Įranga: dokumentacija / vadovas, Dvisluoksnė pūtimo formavimo mašina yra naujos kartos plastiko ekstruzijos pūtimo įranga. Ji daugiausia naudojama baidarių, kanojų, banglenčių ir kitų didelių tuščiavidurių plastikinių gaminių formavimui. Mašina naudoja variklį, specialiai sukurtą, kad užtikrintų didelį sukimo momentą ir pakankamą galią medžiagų pjovimui. Išlydyta plastmasė ekstruzijos būdu paduodama į kaupimo presgalvę. Kai medžiagos kiekis pasiekia nustatytą tūrį, sienelės storio kontrolės sistema nuolat reguliuoja atsidarymo santykį. Išspausta plastmasė suformuojama į ruošinį (parizoną), kuris po to išliejamas į galutinį gaminį. Ijdpfxox R R Igo Agfstd

Būklė: naudotas, Gamybos metai: 2009, mašinos/transporto priemonės numeris: SO128, Used Blow Moulding Machine Contiform This used Krones Contiform S14 blow moulding machine is designed for high-performance production of PET bottles in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for companies looking to expand their capacity or upgrade a used filling line with reliable, pre-owned industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and user-friendly control. The neck handling transfer ensures stable bottle handling in various formats, while the rotary design delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimised for the 1.5-litre format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling plants. Technical Specifications & Performance Data Manufacturer: Krones Series: Contiform Model Code: S14 Year of Manufacture: 2009 Maximum Output: 25,000 bottles/hour Container Material: PET Current Format: 1.5L Maximum Container Height: 320 mm Table Height: 1470 mm Type: Rotary Transfer System: Neck Handling Neck Finish: Alaska Number of Cavities: 14 Number of Spindles: 7 Number of Grippers (Infeed & Outfeed): 7 Working Direction: Counter-clockwise Power Supply: 400 V, 3 PH + N, 50 Hz Rated Current: 313 A Advanced Automation & Control Systems Itsdpfjx H Tgdox Agfjd The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N ensures stable, industry-grade performance. Safety devices and interlocked access points allow safe operation during production and changeovers. The neck handling design facilitates smoother format changes and reduces bottle jams. Production Line Integration Options This Krones Contiform S14 can be operated as a standalone blow moulding machine or integrated into a complete beverage production line. It connects seamlessly with upstream handling systems, high and low-pressure air systems, and downstream conveyors leading to filling, labelling, and packaging machines. The rotary platform and neck transfer system offer compatibility across typical PET bottle sizes, including 1.5-litre bottles and other common formats.

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: SO127, Blow Moulding Machine Contiform – Overview This used Krones Contiform S8 blow moulding machine is engineered for the highly efficient production of PET bottles in modern beverage and industrial packaging plants. Featuring a rotary configuration and robust mechanical design, it achieves outputs of up to 13,000 bottles per hour and supports scalable performance for medium- to high-speed lines. The machine is optimized for PET containers and is suitable for a variety of beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and smooth changeovers. As a versatile component for a used filling line or a standalone blow moulder, this pre-owned system delivers precise preform handling, stable heating, and efficient blowing performance. It features an Alaska neck finish, an 8-cavity configuration, and operates in a clockwise direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Ijdpfx Agex H Tf Tofotd Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Year of manufacture: 2004 Configuration: Rotary Maximum output: 13,000 bph Container material: PET Current bottle format: 0.5L Number of cavities: 8 Thread/neck finish: Alaska Maximum container height: 350 mm Number of grippers (infeed and outfeed): 6 Number of mandrels: 180 Operating direction: Clockwise Working platform height: 1,470 mm Power supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation and Control Systems The Contiform S8 incorporates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and rapid diagnostics. The control architecture supports stable preform heating profiles, precise blow cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the securing and access points to ensure consistent production with minimal downtime. Production Line Integration Options This blow moulding machine can be operated as a standalone unit or seamlessly integrated into a complete used bottling line. It connects efficiently with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labellers. Changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks throughout beverage production...

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, produkto aukštis (maks.): 380 mm, ruošinio skersmuo (maks.): 130 mm, gamybos pajėgumas: 7 200 vienetas/val, TECHNICAL DETAILS Number of molds: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Internal neck diameter: 34 mm MACHINE DETAILS Dimensions & weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform loader dimensions: 2,000 x 2,500 mm Preform loader weight: 250 kg Feeding rails length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 - 12 °C Flow rate: up to 6.0 m³/h Water pressure: 5 - 6 bar Compressed air Service air pressure: 7 bar Service air flow rate: 50 - 100 Nm³/h Blow air pressure: up to 35 bar Blow air flow rate for 0.25 – 3.0 L: 155 – 770 Nm³/h Itodpfxex A Uu Ej Agfjd EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform loader Feeding rails Adaptation to other voltages possible

Būklė: naudotas, Gamybos metai: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Preforms are poured from a container into the feed hopper via a tipping device. From the hopper, the preforms are discharged using an elevator conveyor with electronically controlled speed and are transferred via a chute and loading starwheel in a uniform orientation to the blow molding machine. The shape and size of the preforms are checked and defective preforms are rejected before they are fed to the heating ovens via a mechanical starwheel. In the heating ovens, the preforms are preheated with infrared lamps. For symmetrical heat distribution, they are continuously rotated during this process. Fans prevent overheating of the outer surfaces. Finally, the preform temperatures are monitored by an optical pyrometer. Grippers handle loading and unloading of preforms to and from the blow wheel. The blowing unit uses 'crocodile molds', with longitudinal stretching supported by a stretch rod. The preforms are then blown into PET bottles. The stretch-blown bottles are removed from the cavities by grippers and conveyed to the discharge area. Machine (additional): Rotary blow molding machine Power: 58 kW Number of cavities: 8 Number of bottles discharged per cycle: 202 Blowing pressure: 30 bar Voltage: 400 V Frequency: 50 Hz Water: 4 bar Itodpfxjxyktls Agfsd Compressed air: 360 Nm³/h at 7 bar Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Equipment: Preform feed hopper with tipping device for containers, preform elevator conveyor, preform inspection, heating ovens, blow wheel; bottle discharge; screen visualization Weight: 16,700 kg

Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Gamintojas: s.p.a magic m.p. Tipas: MGL2D Ši pūtimo formavimo mašina yra visiškai veikianti. Šiuo metu dar gamina ir gali būti apžiūrėta iš anksto susitarus. Pageidaujant galiu atsiųsti ir vaizdo įrašus. KAINOS MAŽINIMAS! Nuo 21 000 iki 19 000 EUR! Iodpfx Agsxxp Tbefstd

Būklė: paruoštas naudoti (naudotas), Parduodama 13 sluoksnių Kuhne pūtimo plėvelės linija, skirta dvikryptiškai orientuotų aukštos barjerinės plėvelių gamybai. Plėvelės storio diapazonas: 20µm-80µm, max. plėvelės plotis: 1400 mm, max. našumas: 400 kg/h. Ekstruderiai: 13 vnt., max. galvutės slėgis: 500 barų, Flexring galvutė: 250 mm/300 mm. Kalibravimo įrankiai: 200 mm/225 mm/250 mm/280 mm/300 mm. Išeiga: 80%-90%. Laminavimo plėvelės: užlydymo sluoksnio storis: 25µm-35µm, spaudos sluoksnio storis: 25µm-45µm. Mono plėvelės: susitraukiančio dangtelio storis: 23µm-28µm, AF dangtelio plėvelės storis: 25µm-45µm, viršutinės ir apatinės plėvelės storis: 75µm, balioninės plėvelės storis: 25µm-31µm. Yra dokumentacija. Galima apžiūra vietoje. Iodpfx Agow R Dh Esfstd

Būklė: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2.065.0, spaudimo jėga: 200 kN, New digital control system from BBM. Two sets of extruder heads (see attached pictures). Iedpow Dcybefx Agfotd

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Potpuno automatska PET puhalica – linearna Potpuni servo pogon Itjdpjwrrcnsfx Agfsd 4 kalupa do 2000 ml Novo, kapacitet puhanja 4000 b/h Niska potrošnja energije

Būklė: naudotas, Gamybos metai: 2006, Pusiau automatinė PET butelių gamybos mašina - ZENTRONIK ZR-7 1. Krosnis PET preformų kaitinimui Ijdpfxewnzdao Agfstd 2. Pusiau automatinė PET butelių gamybos mašina Forma: dviguba forma 5,0 l buteliams (kamštelis 48 mm) Našumas: apie 800 bph Techninė būklė: naudota, veikianti

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, La SMF COMBI 400 es una sopladora automática diseñada para la producción eficiente y de alta calidad de botellas PET. Esta máquina combina tecnologías avanzadas para ofrecer un funcionamiento continuo y preciso, con mínima intervención manual, ideal para plantas de embotellado que requieren flexibilidad y rendimiento. VENTAJAS DE LAS SERIES HS Y COMBI: • Bajo consumo energético • Construcción modular • Funcionamiento silencioso • Diseño compacto y ahorro de espacio Itsdpfxowny Eio Agfsd • Cambio sencillo de tamaño de botella y tipos de bocas • Sistema de control PLC avanzado con interfaz de fácil manejo • Memoria integrada en el PLC que almacena los parámetros necesarios para producir diferentes tamaños de botellas • Medición piroeléctrica de temperatura – Power Wizard PRINCIPALES BENEFICIOS: • Sistema probado en condiciones ambientales exigentes • Unidad de cierre potente con controlador preciso y mecanismo de ajuste conveniente • Espacio mínimo de transferencia para el sistema de distribución de aire • Operación simple, robusta y duradera PRINCIPALES PARÁMETROS: Cantidad de aire de soplado (25 BAR): 3,46 m³/h Material del molde: FORTAL

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 240, galia: 60 kW (81,58 AG), Įranga: dokumentacija / vadovas, Complete pellet production plant consisting of a wood grinder, sawdust pulverizing mill, storage silo for pellet dust, pellet press machine, plus conveyor belts, pellet collection silo, and weighing system for bags or big bags. The plant is fully equipped with all automation systems. Itodowiik Rspfx Agfsd

Būklė: naudotas, Gamybos metai: 1992, Automatinė PET butelių pūtimo mašina Gamintojas: SIDEL Tipas: SBO 4 S1 Isdpfx Aowa Rhrsgfjtd Metai: 1992 Našumas: 4 000 (1,5 L / 2 L buteliams) Įdiegta galia: 150 kW Komplekte 1,5 L formos Preformų padavėjas Techninė būklė: naudota mašina, įsijungia, programa veikia gerai

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: ZQ-A1000-1, bendras svoris: 2 800 kg, bendras plotis: 2 500 mm, bendras ilgis: 5 000 mm, bendras aukštis: 2 000 mm, Fél-automata PET-palackfúvó gép eladó. Márka: Zq-A1000-1 Zhenjang, Kína Gyártási év: 2015 Gyártható űrtartalom: max. 2 l Kapacitás: 1 200 db/óra (1,5 l-es palack esetén) 20 kW, 500-650 palack/óra Üzemóra: kb. 500 óra A PET-preformokat kézi adagolással kell betölteni. Környezetbarát! Kukoricából készült alapanyagokkal is működik. A gép minden szükséges kiegészítő berendezéssel felszerelt. A gépről és a tartozékok árait külön listán küldjük. Kapcsolat: Márta Takács Ár: 40 000 EUR Isdpjwazbpefx Agfetd Vállaljuk a bérgyártást is a géppel!