Schreinerei und Küchenwerkstatt

Sąlyga: naudotas, Gamybos metai: 2024, Exhibition machine Garbsen new complete in standard configuration with: - Stable, torsion-resistant frame made of steel, in welded and bolted construction - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation system (Ganner system) for tightly pressed carcass joints - Counterpressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support panels - Continuous pressing surface with height 95 mm on the lower vertical pressing beam - Electromechanical adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and runout accuracy) and high-performance recirculating nuts with grease reservoir - Pressing is performed electromechanically by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the pressing beams is infinitely variable and electronically controlled by 2 potentiometers, regulated by frequency converters, ensuring absolutely wear-free force adjustment - Pressing force for horizontal pressing beam: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressing beam: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation via 6 separate push-buttons, 8 movement cycles selectable via control system - Freely adjustable pressing time preselection with automatic opening: 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Iisdpfxjxy Tl Do Abkjk - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500 x 1200 x 2300 mm (L x W x H) Image includes special accessories: machine feet Surcharge for rapid traverse positioning speed per unit for fast positioning of the pressing beams, controlled via automatic workpiece detection using sensors in the pressing beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing special parts Set of machine feet for 500 mm working height, per unit Location: Garbsen

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2016, LAMELLA - CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counter-pressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Pressing is performed electromotively via 2 separate worm gear motors (2 x 0.75 kW) Iijdpfsxvitiex Abksk - Pressing force of the press beams is steplessly electronically adjustable via 2 potentiometers and controlled by frequency converters, making the press force regulation completely wear-free - Pressing force for horizontal press beam min. 500 daN (kg), stepless up to max. 2200 daN (kg) Pressing force for vertical press beam min. 300 daN (kg), stepless up to max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/second Extremely easy operation - Working height/loading height: 300 mm - Working dimensions: length min. 150 mm, max. 2500 mm; height min. 150 mm, max. 1400 mm; depth: 700 mm Machine no. 563.624 400V, 3-phase, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Fully overhauled by Ganner, parts warranty 6 months Location: from stock 54634 Bitburg - Immediately available -

Sąlyga: naudotas, Gamybos metai: 1989, Darbo matmenys 3000 x 1250 x 650 mm Cilindro eiga 110 mm Staklės matmenys 3240 x 2120 x 770 mm Iodpfxsxu Egve Abksik Svoris apie 900 kg

Sąlyga: naudotas, Gamybos metai: 1993, naudota, puikios būklės Gamintojas: Hess Tipas: Express Pagaminimo metai: 1993 Mašinos Nr.: 100914/28 Cilindrų skaičius viename presavimo elemente: 2 – eiga 110 mm Horizontalūs presavimo elementai: 3 Vertikalūs presavimo elementai: 3 Darbinis plotis: 2500 mm Darbinis aukštis: 1350 mm Presavimo gylis: 600 mm Ijdsxuv N Uopfx Abkoik pneumatinė Aukščio reguliavimas elektrinis Užimamas plotas apie 3600 x 800 x 2450 mm Svoris apie 1200 kg Sandėlio vieta: 97447 Gerolzhofen, pakrauta laisvai, nefasuota Perduodama esamos būklės kaip apžiūrėta, begarantijų ir atsakomybės.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 941, darbinio aukščio: 1 350 mm, darbinis plotis: 600 mm, darbinis ilgis: 2 500 mm, TECHNINĖS DETALĖS Presavimo ilgis: maks. 2 500 mm Presavimo aukštis: maks. 1 350 mm Darbo gylis: maks. 600 mm ĮRENGINIO DETALĖS Elektros duomenys Nominali įtampa: 3/N/PE/400 V Nominali srovė: 11 A Nominali galia: 4,7 kW Dažnis: 50 Hz KOMPLEKTACIJA Vertikalūs ir horizontalūs presavimo strypai juda elektromechaniškai Spaudimas formuojamas dažniu valdomais pavaros varikliais Vertikali ir horizontali prispaudimo jėga reguliuojama atskirai Presavimo laikas reguliuojamas Iodpfexnyg Rjx Abkeik

Sąlyga: geras (naudotas), Gamybos metai: 2014, Naudojama korpuso presas - GANNOMAT Concept 70 Eco Ijdpfx Aoxhc T Tebksik - Pagaminimo metai: 2014 - Bus galima įsigyti 2025 m. gruodį

Sąlyga: labai geros būklės (naudotas), Hess korpuso presas, tipas: Export, pneumatinis Gamintojas: Hess Tipas: Export Korpuso dydis: maks. 2.500 x 1.500 mm Iodpfsxgvwpsx Abkjik Spaudimo jėga: 1400 kp kiekvienam spaudimo agregatui prie 15 bar Vertikalių cilindrų kiekis: 2 + 2 spaudimo cilindrai Horizontalių cilindrų kiekis: 2 + 2 spaudimo cilindrai Matmenys: 3.900 mm x 2.500 mm x 600 mm Svoris: 1060 kg Hess korpuso presas Export, pneumatinis 2 vertikalūs spaudimo agregatai, po 2 spaudimo cilindrus kiekviename agregate, 80 mm cilindro diametras, 110 mm cilindro eiga, 1400 kp spaudimo galia kiekvienam agregatui prie 15 bar, 2 horizontalūs spaudimo agregatai, po 2 spaudimo cilindrus kiekviename agregate, 80 mm cilindro diametras, 110 mm cilindro eiga, 1400 kp spaudimo galia kiekvienam agregatui prie 15 bar, viršutinis labai lengvai perstumiamas dėl svorio paskirstymo, Presavimo procesas valdomas dviem rotaciniais vožtuvais: spausti – stop – atleisti, Priežiūros blokas: slėgio mažinimo vožtuvas 0–15 bar, manometras, rūko alyvintuvas, anoduoto aliuminio matavimo skalės, nuimamos kojos Vieta: kliento aikštelėje Iš karto prieinama

Sąlyga: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: LGMATECH KORPUSSPRESSE, Korpuso presas iškart naudojamos būklės. Presą galima apžiūrėti bet kuriuo metu iš anksto susitarus. Iedpfexf Dvwex Abksik

Sąlyga: naudotas, Gamybos metai: 1982, Presavimo matmenys: 3500 x 2600 mm Elektrohidraulinis įtaisas 4 puodelio lankstų gręžimams, pilnas, 4 puodelio lankstų gręžtuvų įrenginiai Kairioji viršutinė kampinė plokštė su 2 skersiniais slėgio cilindrais 4x hidrauliniai medžio laikikliai Tarpinės mažai presavimui su gręžimo įtaisu Vidurinis slėgio balkis 2600 mm Išilginis slėgio cilindras su priešrėmu 4x puodelio lankstų grąžtai Laikymo vieta: pas klientą Isdpfx Aexftcasbkeik

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, LAMELLA – CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration comprising: - Stable, torsion-resistant steel frame in welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams with proven tolerance compensation (Ganner system) for tightly compressed carcase joints - Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick coated support plates - Continuous pressing surface with a height of 95 mm on the bottom vertical press beam - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance lead nuts with grease reservoirs - Pressing is carried out electromotorically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable via 2 potentiometers and controlled by frequency inverters, thus the pressing force regulation is absolutely wear-free - Pressing force for horizontal press beam min. 500 daN (kg) up to stepless max. 2200 daN (kg) Iodpfx Abow Td A Iskjik Pressing force for the vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Easiest operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Completely overhauled by Ganner, parts warranty 6 months Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, LAMELLA/CARCASS PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcass joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromotorically driven by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per pressing beam. - The pressing force of the beam is electronically regulated and set via frequency inverter, ensuring completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - Simple operation via 6 separate push buttons, 6 motion sequences selectable via control unit. - Freely adjustable pressing time preset with automatic opening function 0-30 min (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - 1 selector switch for variable pressing force 1000 / 1500 / 2000 daN (kg) Machine no. 380.324 Ijdpfxjw Tdyme Abksik 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for 500 mm working height included Used machine: Year of manufacture 2013, completely overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - Immediately available -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995, Pneumatinis spaustuvas baldams. Naudingieji matmenys: 3000x1200 mm. Motorinis viršutinės juostos pakėlimas. Išbandytas ir veikiantis. Iijdpfx Absw S A Ereksk

Sąlyga: naujas, Gamybos metai: 2025, SURFACE CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Lateral pressing beam featuring a continuous pressure surface with a 25 mm thick, coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick, coated support plates - Electromotive adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased lead and concentricity accuracy) and high-performance slide nuts with grease reservoir - Pressing is electromotive via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely electronically adjustable by potentiometer and regulated via frequency converter, ensuring completely wear-free press force control - Pressing force for vertical pressing beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, controlled via 3-position selector switch: 5 / 10 / 25 mm/second Iijdpfjw Sgnkex Abksk - Jog mode for precise positioning of the pressing beam, e.g., for low pressing forces such as drawers, etc. - Simple operation via 2 separate push buttons, 2 movement sequences (Open/Close) selectable from the control panel - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams - Repress function to increase or decrease pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Minimum length: 150 mm, Maximum length: 1300 mm Minimum height: 150 mm, Maximum height: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short notice

Sąlyga: naudotas, Gamybos metai: 1999, bendras aukštis: 2 200 mm, bendras ilgis: 5 200 mm, bendras plotis: 800 mm, Tuščias svoris: 950 kg Iisdpfx Aswyn Naebkjk - Pagaminimo metai: 1999 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: 13301 - Presavimo pavara: Pneumatinė - Didžiausias ruošinio plotis [mm]: 4500 - Didžiausias ruošinio aukštis [mm]: 1550 - Didžiausias ruošinio gylis [mm]: 600 - Vertikalūs presavimo cilindrai [vnt.]: 3 - Horizontalūs presavimo cilindrai [vnt.]: 4 - Transportavimo matmenys: 5200mm x 800mm x 2200mm (i x p x a) - Transportavimo svoris [kg]: 950kg - Transportavimo pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas verslo subjektams Pristatymas ir senos įrangos išpirkimas galimas bet kada iš bet kurios pramonės srities Yorick Diebels

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, complete in standard configuration with: - Robust, distortion-free steel frame in welded and bolted construction - PRESS BEAM LATERALLY with continuous pressure surface with 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, base) are continuous 25 mm thick, coated support plates Iedewx Nfgjpfx Abkeik - Electrically motorised adjustment of the press beam via precision trapezoidal lead screws (with enhanced pitch and concentricity accuracy) and high-performance travelling nuts with grease reservoir - Pressing is performed electrically via a worm gear motor (0.75 kW) - The pressing force of the press beam is infinitely variable and electronically set via potentiometer and regulated by frequency converter, providing absolutely wear-free pressure control - Press force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum of 2200 daN (kg) - Pressing and adjustment speed of press beams with fine positioning, selectable via 3-stage switch: 5 / 10 / 25 mm/second - Easiest operation via two separate push buttons, two movement sequences (open/close) selectable via control system - Freely adjustable pressing time preselection with automatic opening 0–30 min (switchable to seconds or hours) - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400V, 3Ph, 50Hz (1.6 kVA, 16 A)

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 630 mm, aukščio reguliavimo tipas: mechaninis, bendras svoris: 1 100 kg, obliavimo aukštis: 200 mm, darbinis plotis: 630 mm, sukimosi greitis (maks.): 5 500 aps./min, Thickness Planer Make: Dornburg Model: DD 63 Heavy-duty thickness planer (cast iron), table length approx. 1050 mm Planing width approx. 630 mm Maximum workpiece height: 200 mm Cutterhead equipped with 4 strip-style planer knives Motor power: 5.5 kW Speed: 5,500 rpm Feed rate: 18 m/min Dimensions approx. 1100 x 1300 x 1600 mm (LxWxH) Iiedowtqzrepfx Abkok Weight approx. 1100 kg

Sąlyga: labai geros būklės (naudotas), Italpresse Program/30 Hydraulic Assembly Press for Window and Door Joinery The Italpresse Program/30 machine is a vertical hydraulic press designed for the precise assembly and gluing of wooden components, such as window frames, door frames, and furniture carcasses. Its construction allows for accurate alignment and durable bonding of components, which is essential in the production of joinery and furniture making. Technical specifications • Maximum working dimensions: 3000 × 1700 mm • Vertical cylinder stroke: 800 mm • Horizontal cylinder stroke: 1200 mm • Adjustable lower beam: can be set in three positions • Hydraulic cylinders: • 2 vertical (Ø 100/60 mm) • 2 horizontal for frame positioning (Ø 50/35 mm) • Hydraulic unit power: 2.2 kW • Overall dimensions: 3600 × 1000 × 2650 mm • Weight: approx. 1200 kg Isdpfjwkf Stjx Abksik Application The Italpresse Program/30 is ideal for: • Gluing and assembly of window and door frames • Assembly of furniture carcasses • Assembly of wooden panels and other building joinery elements

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Gannomat Concept 70 Eco Cabinet Press Year of manufacture: 2025 including the following options: - Rapid traverse speed: adjustment speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing, as well as for drawer production. Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Minimum pressing force: 300/500 daN (kg) for Concept Eco, minimum pressing force: 600/800 daN (kg) for Concept Primus • Maximum pressing force: 2200 daN (kg) for Concept Eco, maximum pressing force: 3500 daN (kg) for Concept Primus • Three pressing and adjustment speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely selectable pressing time preset with automatic opening • Concept Eco: Simplest operation via six separate pushbuttons for eight movement sequences • Concept Primus: Simplest operation via LCD display Universal application: • Cabinets, e.g. for furniture and cupboards • Mitered carcases • Carcases with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple cabinets / drawers Advantages: • Proven tolerance compensation (GANNOMAT system) • Electromechanical cabinet press with frequency-controlled gear motors Iodsvxgrrepfx Abksik • Independently adjustable vertical and horizontal pressing beams • Extended service life thanks to proven, high-quality components • Sturdy and robust construction • Space-saving design • Cabinet pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Easy to operate via straightforward and practical control panel • Fast thanks to beam positioning speeds up to 50 mm/sec (optional) • Efficient due to precise pressing of various carcass sizes • Flexible through adjustable parameters such as pressing force, pressing time, movement speeds • Precise due to angle-accurate pressing of furniture cabinets and drawers • Professional production of cabinets and drawers with a modern cabinet press

Sąlyga: geras (naudotas), Code : 0024 Iijdpfjvv Ul Usx Abksk Marque : ITALPRESSE Modèle : NUOVO/SP Presse à caisson semi-automatique à réglage rapide Caractéristiques techniques : - Chargement manuel - Dimensions utiles max. : 2500 x 600 x 1250 mm - Dimensions utiles min. : 250 x 600 x 280 mm - Traverse horizontale motorisée avec affichage - Réglage de la poutre verticale - N° 6 vérins verticaux - N° 6 vérins horizontaux - Course des vérins : 70 mm - Course de la traverse : 920 mm - Puissance installée : 0,55 kW - Dimensions hors tout : 3600 x 800 x 2550 h mm - Poids : 1400 kg

Sąlyga: naudotas, Gamybos metai: 1992, Matmenys: 5700 x 1300 x 2400 mm Iodpfsvvkl Dox Abkeik Sandėliavimo vieta: Nattheim

Sąlyga: geras (naudotas), ZIM Hülsta Case Clamp NOW Easy Iijdpfx Asvdbv Ajbksk Manufacturer: ZIM Hülsta-Werke Model: NOW Easy Serial No.: 380125028 Maximum carcass size: 260 x 1100 mm 2 lower supports, adjustable 2 upper pressing beams, adjustable Beckhoff control panel Roller conveyor: 4500 x 600 mm Roller width: 500 mm Overall dimensions (W x D x H): 3300 x 1800 x 3600 mm Find more new and used items in our shop! International shipping costs on request!

Sąlyga: naudotas, Gamybos metai: 2024, New demonstration machine! List price: €32,665 complete in standard configuration with: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Top lamella pressure beam with 6 elements; side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly pressed carcass joints - Back pressure surfaces (side pressure wall and base) are continuous, coated support panels, 38 mm thick - Continuous pressing surface with a height of 95 mm at the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir - Pressing is performed electromotively via two separate worm gear motors (2 x 0.75 kW) Iijdjuf Hx Hepfx Abkek - The pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and controlled by a frequency converter, resulting in absolutely wear-free press force regulation - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to max. 2200 daN (kg), infinitely adjustable - Pressing force for vertical pressure beam: min. 300 daN (kg) up to max. 2200 daN (kg), infinitely adjustable - Pressing and adjustment speed of pressure beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/second - Simple operation via 6 individual push buttons; 8 movement sequences selectable via the control system - Freely adjustable press time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm - Weight: approx. 1800 kg - Net dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m - Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: - Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts - 1 set of machine feet (working height 500 mm) Storage location:

Sąlyga: naudotas, Length: 2,300 mm Width: 800 mm Height: 2,700 mm Workpiece size: max. 130 x 70 x 145 cm Iisdpot H Tuxsfx Abkjk Pneumatic carcass press or gluing press for pressing furniture carcasses or similar items.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Gannomat Model 260 Carcase Press Clamping dimensions: 2500 x 1250 x 650 mm Working pressure: 0-10 bar Cylinder stroke: 110 mm Space requirement: 3240 x 2120 x 770 mm Weight: 900 kg Year of manufacture: 2010 CE compliant The machine is currently being refurbished; further photos will be available shortly. Isdpfx Absrfbnbskjik

Sąlyga: geras (naudotas), Gamybos metai: 1995, mašinos/transporto priemonės numeris: 0243 / 25634, bendras aukštis: 2 600 mm, bendras ilgis: 100 000 mm, bendras plotis: 1 000 mm, spaudimo jėga: 120 t, Ocmac Automatic Throughfeed Case Clamp KOPR CC-EL Manufacturer: OCMAC s.p.a. Italy (ACIMALL) S/N 0243 / 25634 Year of manufacture: 1995 Hydraulic, self-adjusting, electronically controlled case clamp for the assembly of furniture components. Automatic infeed of workpieces. Technical specifications: Max. working dimensions: Length: 2300 mm Width: 600 mm Height: 1500 mm Min. working dimensions: Length: 500 mm Width: 300 mm Height: 200 mm Feed speed of conveyor belt: 2.4–12 m/min Clamping time of the press: 20–40 seconds Installed power: 11.5 kW Ijdjqai H Tjpfx Abkoik Max. pressure: 120 bar Voltage: 380 V, 50 Hz Net weight: 4500 kg