Kurt Buck Baugesellschaft GmbH & Co. KG

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Kampinis apdirbimo centras langų ir durų gamybai „SCM“ mod. WINDOR 60 Psdpfx Aezacx Uedzept Įrenginys vis dar veikia, galima apžiūrėti pas stalių. Siūloma, kol bus parduota.

Būklė: naudotas, Gamybos metai: 2006, Siūlome šį naudotą langų apdirbimo centrą Colombo AT 60 - AP1000, pagaminimo metai 2006. Ppedpfxsy Uig Ae Adzot Jei turite klausimų ar norite gauti daugiau informacijos, nedvejodami parašykite mums žinutę arba paskambinkite.

Būklė: naudotas, Slotted spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Weinig Unicontrol 11 window production line with extensive tooling ----- Optionally available (at additional cost) - Weinig Univar 6 slot-rebating machine (price on request!) - Götzinger PowerDrill drilling and milling center for windows and doors (price on request) Technical manufacturer description: ----- Position 1: Weinig Unicontrol 11 window production line ----- including available tooling - IV 67 wood and wood-aluminium - IV 77 wood and wood-aluminium - IV 90 wood Crosscut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake from 3,000 to 6,000 rpm. Max. tool diameter 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically to 8 positions for top edge rounding Horizontal lower rounding unit ----- motor with brake: 1.5 kW, spindle diameter 20 mm, clamping length 25 mm, speed 9000 rpm Max. tool diameter 130 mm Axial adjustment mechanically linked with the crosscut saw Radial travel pneumatically controlled Tenoning and slotting spindle ----- with hydraulically clamped counter bearing motor power with brake: 15 kW spindle diameter 50 mm spindle speed 2,800 rpm max. tool diameter 400 mm clamping length 640 mm axial adjustment NC axis home position below table: 5-10 mm radial adjustment: fixed 1st profiling spindle (with and against the feed) ----- motor power with brake 11 kW spindle diameter 50 mm spindle speed 6,000 rpm min. tool diameter 140 mm, max. 232 mm clamping length 400 mm with counter bearing axial adjustment 350 mm by NC axis radial adjustment NC axis home position below table: 5-10 mm 2 feed rollers opposite the spindle axially controlled pneumatically, 8 positions Upper horizontal profiling unit ----- motor with brake 3.7 kW spindle diameter 40 mm clamping length 40 mm spindle speed 9,000 rpm max. tool diameter 130 mm pneumatic adjustment to 8 positions axially and radially 2nd profiling spindle ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm min. tool diameter 140 mm, max. 232 mm clamping length 400 mm with counter bearing axial adjustment 350 mm by NC axis radial adjustment NC axis home position below table: 5-10 mm Indexed guide rail with crossbar support 2 feed rollers opposite the spindle axially controlled pneumatically, 8 positions Vertical right-end profiling unit ----- motor with brake 3.7 kW spindle diameter 40 mm clamping length 160 mm spindle speed 5,850 rpm min. tool diameter 112 mm, max. 210 mm pneumatic adjustment to 8 positions axially and radially Ppjdpey T R Tuefx Adzot Lower horizontal profiling unit ----- motor with brake 3 kW spindle diameter 40 mm clamping length 125 mm spindle speed 5,850 rpm

Būklė: naudotas, Slot spindle 1 0 Number of milling units: 2 pcs. Podpfjy T R Tbjx Adzjpt Spindle diameter: 40, 50 mm Pos. 1: Okoma Angle Combination UF1 S and Pos. 2: Rebating Machine UF2 EG incl. Pos. 3: Tool set IV78 Wood, IV78 Wood Entry Doors, IV78 Wood-Aluminium Windows Gutmann, with straight and angled cheek For sale on behalf of a customer ----- Technical Manufacturer Description: Pos. 1: Okoma UF 1 S Slot and Profiling Machine / Rebating Machine ----- Compact, heavy-duty window machine in cast iron construction, consisting of: Cross-cut saw operating from above with 12-position turret stops, positive-guided blade guard for accident prevention. Slot spindle 40 mm diameter x 252 mm, dual stroke for 3 tool positions (working height 83 mm), 7.5 kW motor Roller table adjustable on both sides 0–60° automatic feed with stepless adjustable speeds, double pneumatic clamping, length stop LAS 3-position system 2300 mm automatic transfer to profiling section Profile spindle 40 mm diameter x 252 mm pneumatic lift 112 mm (adjustable) for 2 tool positions 7.5 kW motor, spindle horizontal adjustment against tool exit edge, front milling stop jaw adjustable Glazing bead saw with 3 kW motor, with 4-position turret head adjustment, heavy-duty articulated feed, infinitely adjustable 0–25 m/min, roller groups swiveling inward and outward, reverse stop with 5-position turret head frame milling device ----- Pos. 2: OKOMA Rebating Automatic Machine Model UF 2 EG ----- Energy data: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: Air consumption: 13 NL/cycle, Operating pressure: 8 bar prepped air: as per Pneurop 6611 1. Profile Spindle 1: - Spindle position: right - Power: 11 kW - Speed: 7,000 rpm - Rotation: both clockwise & counterclockwise - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Profile spindle travel - Vertical positioning: Drive: Pneumatic cylinder, 90 mm stroke for 3 tool positions Position sensor: limit switch - Horizontal positioning: Drive: Pneumatic cylinder, forward/back Position sensor: limit switch - plunge automation: Plunge speed adjustable for tear-free rebating - Safety and extraction hood with connection stub, 140 mm diameter 2. Profile Spindle 2: - Spindle position: right - Power: 11 kW - Speed: 7,000 rpm - Rotation: counterclockwise - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Profile spindle travel - Vertical positioning: Drive: Pneumatic cylinder, 90 mm stroke for 3 tool positions Position sensor: limit switch - Horizontal positioning: Drive: Pneumatic cylinder, forward/back Position sensor: limit switch - Safety and extraction hood with connection stub, 140 mm diameter 3. Fitting Milling Device EG: - Spindle position: right - Drive: three-phase motor, 3 kW - Speed: 6,000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: none - Horizontal positioning: Drive: Pneumatic cylinder, forward/back Position sensor: limit switch (rear only) - Safety and extraction hood with connection stub, 80 mm diameter Stop: - 1st stop: in front of spindle 1, manual chip removal, quick adjustment via parallelogram - 2nd stop: between spin...

Būklė: naudotas, Gamybos metai: 1998, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 83406, Langų apdirbimo centras Weinig Unicontrol 10, pagaminimo metai 1998 Podpey Sxlpofx Adzopt

Būklė: naudotas, Parduodama mašina su visais nuotraukose matomais įrankiais. Ppjdpfoy Rumtox Adzet

Būklė: naudotas, Gamybos metai: 1993, Įrankiai IV 68, 78 ir kultūros paveldo apsauga. Gręžimo ir griovimo velenas – 3 įrankiai, variklis 7,5 kW. Profilinis velenas – 3 įrankiai, variklis 5,5 kW. Pjdpoy Hrrxjfx Adzopt

Būklė: labai geros būklės (naudotas), WEINIG Window Production Line, Unicontrol 6, S/N 035-823, Year 1997 Pedpfx Adjy Dud Eezept Crosscut saw, pneumatically indexed (3 kW) with laser guiding light Slot spindle 50 x 320 mm for 4 tools of 80 mm each – 11 kW motor Parallel spindle 50 x 120 mm – 7.5 kW motor Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each – 11 kW motor Hardware fitting spindle, pneumatically indexed, 40 x 160 mm – 3 kW motor Saw/grooving spindle, horizontal at the top, pneumatically indexed – 3 kW motor Feed adjustable from 6–12 m/min. – 1.1 kW motor Screen control for 99 window types Support rail for glazing bar production, pneumatically indexed Special window setup with digital angle display Length stop up to approx. 3,500 mm Rebating unit with support rail Return transport device to machine operator Complete machine with operating instructions, circuit diagrams, spare parts lists LEITZ tool set, IV-78 THE SYSTEM IS IN VERY GOOD TECHNICAL AND VISUAL CONDITION Delivery: EXW Lead time: promptly after arrangement Inspection: by appointment Payment: Upon notification of readiness for dispatch Errors and prior sale excepted.

Būklė: naudotas, Gamybos metai: 2004, Slot spindle: 2 units Number of milling units: 7 units Spindle diameter: 50 mm #6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of customer. Machine connected and operational for demonstration. Including used window tooling for Unicontrol 12, OERTLI various wood thicknesses ----- Short summary: ----- - 2 slot spindles, each 640 mm length, CNC-controlled - Variable pitch system - 3 x profile spindles, each 400 mm length, CNC-controlled - Fitting spindle + top and bottom grooving units - Including used window tooling for Unicontrol 12, OERTLI (various wood thicknesses and systems programmed and tested—see attached PDF) Detailed description: ----- Cross-cut saw ----- Cross-cut saw is electronic, horizontally adjustable steplessly Number of tools: 1 pc. Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Motor power: 3 kW Laser guide light for saw cut positioning Rounding unit ----- Position: horizontal bottom Motor power: 1 kW Spindle diameter: 20 mm Spindle speed: 9,000 rpm Max. tool circle: 130 mm electronic length stop, length: 3,500 mm ----- 1st tenoning and slotting spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2,800–4,000 rpm Spindle diameter: 50 mm Max. tool diameter: 380 mm Motor power: 15 kW 2nd tenoning and slotting spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2,800–4,000 rpm Spindle diameter: 50 mm Max. tool diameter: 380 mm Motor power: 15 kW 1st profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm, with top bearing Vertical spindle stroke: variable, CNC-controlled Psdpfx Adeyyqm Ijzspt Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool circle: 232 mm Motor power: 11 kW 2nd profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm, with top bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool circle: 232 mm Motor power: 11 kW 3rd profiling spindle ----- Position: horizontal top...

Būklė: geras (naudotas), Kodas: 0321 Prekės ženklas: SCM Modelis: MULTIFLEX C – CE standartas Ppedpsytn U Ijfx Adzst Automatinis darbo centras langų rėmams skersavimui, profiliavimui ir kontūriniam apdirbimui – Maksimali ruošinio storis 140 mm – CE standartas Techniniai duomenys Automatinė vežimo sistema su drožlių laužytuvu Maksimalus apdirbamo ilgio dydis: 2800 mm Minimalus/maksimalus ruošinio storis: 30/140 mm Galinio pjūklo disko skersmuo: 400 mm – Variklio galia: 4 AG Špilinio veleno naudingoji ilgis: 320 mm – Variklio galia: 10 AG Veleno diametras: 50 mm Maksimalus įrankio diametras: 350 mm Profiliavimo velenai: 1° Anti-drožlių profiliavimo veleno ilgis: 320 mm – Variklio galia: 7,5 AG – Įrankio diametras: 220 mm 2° profiliavimo veleno ilgis: 320 mm – Variklio galia: 7,5 AG – Įrankio diametras: 220 mm Min./maks. profiliavimo velenų įrankių skersmuo: 100/220 mm Profiliavimo velenų diametras: 50 mm Įrankių grupė: Zuani Kintamas padavimo greitis Stiklo rėmelių atgavimo grupė – Variklio galia: 3 AG – Ištraukimo vamzdžio diametras: 50 mm Bendri matmenys: 2400 x 3300 x 2000 h mm Svoris: 2200 kg

Būklė: naudotas, Gamybos metai: 2004, Slotted spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm CNC control: Weinig PC-Nexus Weinig Uncontrol 12 With radial and axial NC spindles as well as VARIO table ..... The machine has been professionally dismantled and stored in 73447 Oberkochen. Technical Data Summary (Please enquire separately about any additionally included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronically/electrically, stepless horizontal adjustment > Number of tools: 1 pc. > Spindle speed: 3000–6000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial traverse: 150 mm NC axis, stepless electronic adjustment > Radial traverse: pneumatic, 8 positions for e.g. top edge rounding Rounding unit ..... > Position: horizontal, bottom > Axial traverse combined with cross-cut saw Electronic length stop ..... > Length: 4500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial traverse: 580 mm NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Counter support: entire clamping length is countered 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial traverse: 580 mm NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Counter support: entire clamping length is countered Transfer conveyor ..... For transferring the components into the longitudinal machining area, including double workpiece separation before the entry to the longitudinal machining section. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial traverse: 350 mm NC axis, stepless > Radial traverse: 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool swing diameter min.: 140 mm > Tool swing diameter max.: 232 mm Pjdpfxeyrtzks Adzopt 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial traverse: 350 mm NC axis, stepless > Radial traverse: 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool swing diameter min.: 140 mm > Tool swing diameter max.: 232 mm 3rd profiling/milling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial traverse: 30 mm NC axis, stepless > Radial traverse: 125 mm NC axis, stepless > Spindle speed ...

Būklė: naudotas, Gamybos metai: 2006, Šliuzo velenas 2 vnt. Frezu agregatų skaičius: 5 vnt. Veleno skersmuo: 50 mm SCM Windor 40 R langų gamybos linija, pagaminta 2006 m. ----- Mašina yra visos langų gamybos įmonės pardavimo dalis, žiūrėti sandėlio numerį 1305-6979. Įrenginiai vis dar prijungti ir paruošti demonstracijai. Techninė santrauka: ----- - 2 ilgi CNC valdomi šliuzo velenai - Optima 16: gręžimo agregatai kaktinėms ir išilginei skylėms 't- ROTATEN: pasvirusių langų įtaisas - 3 ilgi CNC valdomi profilio velenai + agregatas iš viršaus ir apačios - Apvertimo vežimėlis mažiems varstomiems langams - Ruošinio grąžinimas Papildomi variantai už papildomą kainą: ----- - Naudoti Leitz langų ir durų įrankiai SCM Windor 40 R sistemai. Kaina 10 000 eurų - Atskira OKOMA UF 3 apvertimo mašina su pritaikytais įrankiais SCM Windor 40 R sistemai. Kaina 2 000 eurų - Naudota drožlių nutraukimo ir filtravimo įranga SCM Windor 40 R (daugiau informacijos PDF faile). Kaina 5 500 eurų Pjdpfx Adsyn R Imjzept (Techniniai duomenys pagal gamintojo informaciją, be garantijos!)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1988, Langų gamybos staklės Gamintojas: Okoma Modelis: UF1 S Metai: 1988 Ppedpfx Ajyk Haqedzst su įrankiais

Būklė: naudotas, Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window machining center ----- For sale on behalf of customer Manufacturer’s description: Designed for the production of individual parts, components, and small series. Spindle arrangement: One crosscut saw, a single tenoning and slotting spindle, a right-hand profiling spindle, a tenoning/slotting spindle, and a profiling spindle suitable for stacking multiple tools on top of each other, with pneumatic spindle movement. Slot table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit. Height adjustment of the feed by manual control. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for precise frame or sash external dimensions. Control of tool positions (longitudinal and cross machining) via selector switch on the operator panel. Technical data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Psdpfxox Tu N He Adzept Synchronised spindle ----- Pneumatically actuated forward/backward motion for tear-free profiling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool min. diameter: 112–140 mm, max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for synchronised spindle from 4 kW to 7.5 kW Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production possibilities: single pieces, double pieces, by frame, series production, profiling. Data input via keyboard with integrated user guidance and error diagnostics. 1 Groove spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial stroke: 2 positions Radial stroke: 2 positions Max. tool diameter: 130 mm Motor upgrade for groove spindle from 2.2 to 3 kW 1 hardware recessing unit, right: ----- For routing the hardware groove during profiling or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the operator panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting circle: min. 140 mm, max. 180 mm Home position below table: 10 mm Hardware router in special design: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial stroke, 2 positions Motor upgrade for hardware routing spindle from 2.2 to 3 kW Hardware routing spindle for 230 mm tool diameter in and above table Electrical height adjustment of the feed with selector switch on the operator panel for 2 timber dimensions, includ...

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, ilgio ribotuvas: 3 200 mm, įrankio skersmuo: 400 mm, ašies skersmuo: 50 mm, spindelio eiga: 640 mm, veleno greitis (maks.): 3 000 aps./min, frezos veleno ilgis: 320 mm, pjūklo disko skersmuo: 400 mm, aukščio reguliavimo tipas: elektrinis, įvesties srovės tipas: Oro kondicionierius, darbinio aukščio: 130 mm, darbinis plotis: 200 mm, SCM Windor 60/100 – Angular Machining Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System This production line is a window and door manufacturing system of the Windor 60/100 type by SCM Group, year 2005. It is a CNC-controlled angular machining centre designed for the industrial processing of frame and sash components. The system is built for serial production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angular Machining Centre The SCM Windor 60/100 features a modular build and is designed as an angular processing line. Machining is carried out on a tenoning side and a profiling side arranged at right angles to each other. Multiple machining steps such as milling, drilling, grooving, rebating, and tenoning are executed in a seamless CNC-controlled process. Key Features: * CNC multi-sided processing * Multiple milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy Ppedpsx Nqqxefx Adzet 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the system and is used for precise drilling operations for joints and fittings. The drilling is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profiling milling operations and consists of two processing sides: Right Side: * Lifting spindle with adjustable height * For variable profile and contour machining Left Side: * 24-position tool changer * Automatic tool change to minimise set-up times * Suitable for complex profile milling 2.4 Löwer Surface Grinding Machine A surface grinding machine from Löwer is integrated into the line. This machine is exclusively used for surface grinding to improve the surface quality of the machined parts. 3. Control, Operation and Safety The system is equipped with CNC control managing all machining processes, tool changes, and feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are compliant with the state of the art at the time of construction (2005) and include in particular: * Mechanical safety guards and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL 10-Spindle Planer An extension of the existing machine park is planned with the installation of an SCM Topset XL 10-spindle planer. The machine operates as a standalone work station at a separate location within the production hall and is not directly connected to the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07.01.2026

Būklė: naudotas, Grooving spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, plus VARIO table and trimming carriage ..... Machine professionally dismantled and in stock at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical Data Summary (Please inquire about any additionally included accessories) ..... Cross-cut saw ..... > Cross-cut saw electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser guideline for cutting section recognition > Axial adjustment travel: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment travel: pneumatic, 8 positions for e.g. top edge rounding Rounding unit ..... > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Maximum tool diameter: 130 mm > Axial adjustment mechanically linked to cross-cut saw > Radial adjustment pneumatically controlled On/Off electronic length stop ..... > Length: 4500 mm 1st Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered 2nd Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing unit, including double-part singulation before infeed into the longitudinal processing. 1st Profiling Spindle (Climb and Counter Direction) ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm Pjdpfxox H Al Nj Adzjpt > 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled to tool diameter 2nd Profiling Spindle ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Būklė: geras (naudotas), Gamybos metai: 1980, gerai išlaikyta griovelių pjovimo staklės, žinomo gamintojo Okoma, su 40 mm ašimi Ppsdpjxvllzofx Adzet

Būklė: naudotas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm # 2809 Weinig Unicontrol 6 Technical Data Overview (please inquire about any additionally included accessories) Pedsxtvgkspfx Adzept Pos. 1: Crosscut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for saw cut detection CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenoning and slotting spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for timber thickness 68 - 92 mm > Spindle speed: 3,000 rpm > Max. tool cutting circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb and counter rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for timber thickness 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for processing narrow, short elements (e.g. glazing bars) Glazing bar guide consisting of: Glazing bar support rail from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment travel 52 mm, indexed to 2 positions > Radial adjustment travel 125 mm, indexed to 2 positions Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment travel: 90 mm, indexed to 3 positions > Radial adjustment travel: 100 mm, indexed to 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Other features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed beam clamping > Rebating unit for splinter-free rebating > Double-piece package > Return conveyor for one-man operation: pivoting belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction port diameters: ----- Crosscut saw: 80 mm Slot spindle: 140 mm Profiling spindle 1: 140 mm Profiling spindle 2: 140 mm Grooving unit (top): ...

Būklė: naudotas, Slotted Spindle 1 pc Number of Milling Units: 4 pcs Spindle Diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled radially and axially --- The machine was factory-refurbished by Weinig in 2024. During this process, the control system was upgraded to Siemens S7 677 C with a new “touch” membrane panel. Equipped with the following processing units: Crosscut Saw --- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically across 8 positions for edge rounding from above Edge Rounding Unit from Below --- Axial adjustment paired with crosscut saw Tenoning and Mortising Spindle --- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm minimum tool cutting circle 380 mm, maximum 400 mm tool clamping length 640 mm axial adjustment CNC axis axial adjustment stroke 580 mm adjustment speed 100 mm/sec 1st Profile Spindle (Conventional and Climb Milling) --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd Profile Spindle --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal Profiling Unit, Upper --- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment over 8 positions axially and radially Psdexpi Duepfx Adzspt Vertical Profiling Unit, Right at Machine End --- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment over 8 positions axially and radially Additional Equipment --- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, incl. positioned crosscut saw integrated into the control Window mullion cutting unit, swivels 60° both sides double-part handling package with automatic singling and transfer feed-in device with window automation for rebating rebate carriage for rebating narrow sash widths climate control unit in the switch cabinet PC control NEXUS automatic turning system lamella conveyor, including return conveyor for transporting workpieces back to the operator (Technical data according to manufacturer – subject to confirmation).

Būklė: labai geros būklės (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, WEINIG Unicontrol UC 10-5 Window Manufacturing Machine 1. Electronically controlled cross-cut saw with laser-guided switching from saw cutting to zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for 6 x 80 mm tools, 15 kW motor Ppjdoxmr N Ispfx Adzet 3. Longitudinal/profile spindle (synchronous) 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 4. Grooving spindle (between the 1st and 2nd lifting spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 7. Clamping spindle 40 x 150 mm, axial cycle: 3 positions, radial cycle: 2 positions, 3 kW motor Right-side saw and grooving spindle, 3 kW motor Fitting spindle 40 x 150 mm, 3 kW motor Adjustable feed 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop 3600 mm Workpiece return via automatic rotating system Automation package Interval-controlled sash support Double parts package Laminate fabric tabletops (for sanded surfaces) Left-side pressure guide, max. timber width difference 100 mm Machine in very good technical and visual condition

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, GUBISCH Centromat CW3 naudota mašina langų ir durų gamybai su 50 mm Ø velenais išilginiam profiliavimui Šios dalys jau buvo atnaujintos: Pjdpfsxgqluex Adzept Energijos grandinė ir elektros laidai iki įpjovimo stalo Garso izoliacinės kilimėliai dangčiuose Pneumatiniai vamzdeliai Guolis kontrdiskui Sujungimo pusė išilginiame ruože Sukimosi daviklis antrajam įpjovimo velenui Guolis įpjovimo stalui Kompiuteris išvalytas ir patikrintas Įvairūs pneumatiniai cilindrai Trapecinė diržas

Būklė: naudotas, Slotting spindle 1 pc. Number of milling units 1 pc. Spindle diameter 40 mm Small window production line consisting of: ----- 1) Haberkorn FZS1 slot mortising machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead cutting saw. Price: €4,000 3) Oertli tooling for the Haberkorn and Okoma machines. Price: €7,500 Timber window tool set IV 68/78/88 and timber-aluminium window tool set IV 68/78, year 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. Price: €7,000 (Hardware conversion available at extra cost on request!) ----- Technical description by manufacturer: - Haberkorn FZS1 slot mortising machine with automatic feed, -Infinitely variable height adjustment D 40 mm Cross-cut saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal positioning: pneumatic, manually adjustable -Safety guard and extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: -Power: 7.5 kW -Speed: 4200 rpm -Usable length: 252 mm -Max. tool diameter: 340 mm -220 mm stroke, infinitely variable height adjustment via precision ball screw spindles -Safety guard and extraction hood with extraction port diameter: 180 mm -Automatic brake with speed monitoring Tilting table: -Swivel range: +/- 65 degrees -Automatically changing counter-block (programmable) -Pneumatic clamp -Highly accurate electronic angle indicator -Automatic length compensation -Counter-block always remains in the cutting plane for any angle setting Special equipment: -Laser for workpiece positioning -Saw position pneumatic -Length stop LA 2500 mm + 1850 mm extension ----- 2) Okoma SF3F table milling machine with lift spindle, 3 tools -Extraction connection port 2 x 120 mm -Spindle length: 270 mm -Opposing fence with fine adjustment and turret head -Triple stroke, max. working height: 90 mm -Glazing bead separation saw with safety and extraction hood, diameter 80 mm -8-roller feed unit with stand and hold-down arm, required for set up with glazing bead separation saw -Pneumatically-actuated insertion device for edge gears, speed 6000 rpm -2 x 3 kW motors -Spindle mounting diameter: 30 mm ----- 3) Oertli tooling for the Haberkorn and Okoma machines -1 set timber windows IV 68/78/88 Pedpfx Asxa Hi Nodzspt -1 set timber-aluminium windows IV 68/78 Tools are sold in the condition, scope, and with the accessories as available in our warehouse. Note regarding window profiles, tool drawings, and tool system lists: Fa. Engelfried assumes no warranty that the tools actually supplied correspond with the systems listed or illustrated. ----- 4) Götzinger OBM Plus corner hinge and olive drilling machine -Corner and scissor hinge + handle drilling -Drilling unit vertical with: -Quick-change clamping device for drill heads -Pneumatic feed with foot switch -1x olive drilling head 24 mm -1x corner hinge double head -Maco MultiMatic hardware -1x adjustable folding stop, left, with 6 stops -1x adjustable folding stop, right, with 6 stops -1x machine stand complete with shelf -220/400 V, 60 Hz, 1.3 kW -1x roller conveyor approx. 1 m long with 2 rollers -1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of...

Būklė: labai geros būklės (naudotas), Centru CNC de prelucrare a ferestrelor. Ppsdpfx Aowmxkhsdzst

Būklė: naudotas, Unit 10 Spindle diameter: 40 and 50 mm Motor: 1 x 15 kW, 4 x 11 kW, 5 x 3 kW Weinig Unicontrol 10 (UC 10) angle processing system for the production of windows, components, and doors. Suitable for frame-by-frame, batch, or single part manufacturing, featuring 2 tenoning and mortising spindles, including Oertli tool set. - Units: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profil milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profil milling unit, vertical right, 3 kW Ppodpfx Ajv Ag Tdsdzot 9. Profil milling unit, vertical right from above, 3 kW 10. Profil milling unit, horizontal from below, NC axis, 3 kW - Double piece package - Re-milling package with re-milling carriage - Automatic turning system - PC control NEXUS - CNC controlled length stop - Set-up for studio windows - Unit for rounding edges from below with crosscut saw - Glazing bar support rail - Including extraction pipe system - Including Oertli tool set - Further technical data and tool drawings available on request.

Būklė: naudotas, Gamybos metai: 2000, Sandėlio vieta: Nattheim Ppjdpfxjvwdmwj Adzst