Dirbtuvėse atnaujinta apvalioji šlifavimo staklė

Ziersch & Baltrusch URS750

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over cross slide: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Fpedpfx Asx Hgl Hefdjh Tool turret: Number of tool stations: 12 (flexibly equipped with stationary and driven tools) Turret indexing time: - 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel paths: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Būklė: geras (naudotas), Gamybos metai: 1999, Mašina je u dobrom stanju. X osovina: 750 mm Y osovina: 400 mm Fodpfjwx Rafox Afdeph Z osovina: 500 mm Maksimalna brzina vretena: 10.000 o/min

Būklė: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Fedpfsvca Izex Afdeph Maximum Plunge Depth: 1.7 mm Grinding Spindle Headstock Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Taper Mount: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No liability is accepted for the correctness, completeness or accuracy of the information provided.

Būklė: naudotas, Technical details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table feed rate: 0.05-4.5 m/min, stepless Speed: grinding spindle 1,780 / 2,050 rpm Speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2,200x280 mm Table swivels both sides: 9° forward, 10° backward Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDING MACHINE without internal grinding device - For precision grinding of external (and internal) as well as tapered surfaces. - Grinding spindle head infeed manually or hydraulically - Hydraulic, stepless table feed - Grinding spindle swivels 60° - Workpiece spindle head swivels 90°, with Morse taper MK 4 - Tailstock with Morse taper MK 3 Fpsdpfeu Ng Dgex Afdoh Equipment: - Wheel dressing device - Coolant tank incl. pump and feed line in current condition.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm Fedpeuha Umefx Afdoph BACKWORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Required space: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1,700 kg ACCESSORIES - Control unit: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Būklė: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Stock machine "NEW" – available at short notice! (subject to prior sale) Control Unit: FANUC 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC storage LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel Ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear Guides & Speeds: Ball guides on X/Y axis Fedsifn N Njpfx Afdoph Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate when milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine (CAM-Type) / Changer: Number of magazine positions: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent empty slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW 15,000 rpm direct drive spindle Spindle oil cooler Coolant, Chip, and Compressed Air Management: Coolant system incl. 300-liter tank and pumps External coolant around the spindle Chip augers right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Other Features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger on control cabinet Auto power OFF function Hand tool set Signal beacon Transformer 400 VAC, 50 Hz CE Declaration of Conformity in accordance with European directives Electrical and Pneumatic Requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Special Equipment Included: Spindle: - Direct drive spindle SK-40, 15,000 rpm - Drive power (30min/continuous): 18.5 / 15 kW, (FANUC motor) Tool Magazines / Changers: - Drum magazine with 30 stations, DIN69871, SK-40 Rotary or Additional Axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, Chip, and Compressed Air Management: - Bed flush - CTS coolant pump with 20 bar pressure for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip trolley (chip discharge to front on left machine side) Measuring and Monitoring Systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in the machine, incl. mount - Auto door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown with RoboJob Mill Assist 25kg (year 2025 – NEW) - Full enclosure - Double gripper Available immediately

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Šlifavimo sraigtų matmenys: Min./maks. išorinis skersmuo: 280/350 mm Plotis: 84/104 mm Maks. žingsnis su apribojimais: MOD 8.0 (DP 3,2) Fpjdpfx Aoyfnlkofdjh Sriegių skaičius: su apribojimais iki 3 Maks. naudingoji plotis (poslinkio eiga): 90 mm Išsamią techninę informaciją rasite pridėtame PDF faile. Priedai: Keletas Fässler deimantinių diskų Profilio formavimo įrenginys Šlifavimo akmenys Turbo separatorius

Būklė: naudotas, Šlifavimo ilgis 1000 mm Šlifavimo plotis 750 mm Ruoinio aukštis 700 mm Valdymas SIEMENS, SIMATIC S 7-1500 Stalo tvirtinimo paviršius 1050 x 640 mm Stalo aukštis nuo grindų 1000 mm Stalo greitis 3.000 - 30.000 mm/min Stalo skersinis pastūmimas nuolat 5 - 5.000 mm/min Stalo skersinis pastūmimas pertraukiamai 0,1 - 65,0 mm Vertikalus padavimas, 1 padala 0,002 mm Vertikalus greitaeigis padavimas 0,25 m/min Šlifavimo verpstės apsisukimų dažnis 50 - 2.500 aps./min Šlifavimo rato matmenys ø 400 x 50 x ø 127 mm Didžiausias ruoinio svoris 1.000 kg Fpedpfexukqyox Afdoh Maks. stalo apkrova 1600 kg Bendras galios poreikis 33,2 kW Staklių svoris apie 9,3 t Staklių matmenys I x P x A 4,50 x 2,37 x 2,65 m - visa staklių elektronika/elektra atnaujinta 2018 m. - Priedai: magnetinė plokštė 1000 x 650 mm, šlifavimo ratas su flanšu, atnaujinimo įtaisas, ištraukimo sistema

Būklė: naujas, Gamybos metai: 2025, sukimosi skersmuo virš skersinio stumduko: 250 mm, tekėjimo ilgis: 730 mm, tekėjimo skersmuo: 500 mm, veleno greitis (maks.): 1 800 aps./min, Stačionarinis CNC tekinimo staklės CK 6150 su plokščia lova Siūlome naują CNC tekinimo staklių modelį CK6150. Šias stakles naudojame savo gamyboje, todėl prieš užsakymą galite jas pamatyti veikiančias. CK 6150 tekinimo staklės turi plokščią lovą ir grūdintus kreipiančiuosius, o tai užtikrina ilgaamžį staklių eksploatavimą. Standartiškai staklės komplektuojamos su GSK CNC valdymo sistema. Papildomai galima užsakyti Fanuc arba Siemens CNC valdymo sistemas. Įrankių laikiklis gali būti 4, 6 arba 8 pozicijų – priklausomai nuo kliento poreikio. Staklėse galima sumontuoti hidraulinį griebtuvą, kuris žymiai palengvins detalių tvirtinimo procesą, bei hidraulinį užpakalinį centrą. CK 6150 tekinimo staklės gali būti papildomai komplektuojamos atramine rėmo dalimi ilgesnių detalių preciziškam apdirbimui. Techninės specifikacijos: Modelis: CK 6150 x 1000 Maksimalus ruošinio diametras virš lovos – 500 mm Maksimalus ruošinio diametras virš atramos – 250 mm Maksimalus ruošinio ilgis – 1000 mm Maksimalus tekinimo ilgis – 730 mm Griebtuvo kiaurymės skersmuo – 82 mm Griebtuvo apsukų diapazonas – 150–1800 aps./min. Variklio galia – 7,5 kW Mechaninis griebtuvas (hidraulinis – pasirinktinai) Griebtuvo dydis – 250 mm 4 pozicijų įrankių laikiklis (6 arba 8 pozicijų – pasirinktinai) Didžiausias įrankio matmuo laikiklyje – 25x25 mm Staklių svoris – 2700 kg Staklių matmenys – 2650×1700×1820 mm Taip pat galime pasiūlyti stakles CK 6140, CK 6150 ir CK 6160 su kitomis darbo dalies dimensijomis: Fjdoxdmgvepfx Afdsph CK 6140 darbo zona – 550/750 mm CK 6150 darbo zona – 1000/1500/2000 mm CK 6160 darbo zona – 1000/1500/2000 mm CK 6152E darbo zona – 1000/1500/2000/3000 mm CK 6165E darbo zona – 1000/1500/2000/3000 mm CK 6185E darbo zona – 1000/1500/2000/3000/4000 mm CK 61100E darbo zona – 1000/1500/2000/3000 mm CK 61125E darbo zona – 1000/1500/2000/3000 mm.

Gamybos metai: 1971, būklė: naudotas, Technical Details: Fpodpovc Apbjfx Afdeh Wheel diameter – max.: 300 mm Module – max.: 5 Module – min.: 0.5 Max. workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions: 1800 x 1850 x 2500 mm Switch cabinet dimensions: No. 1: 1930 x 400 x 1920 mm Switch cabinet dimensions: No. 2: 800 x 230 x 1950 mm Exhaust unit dimensions: 1400 x 700 x 560 mm Cooling unit dimensions (LxWxH): 1.2 x 1.0 x 0.45 m Electronically controlled gear flank grinding machine For modules up to 5 and diameters from 240–300 mm Feed rate per workpiece revolution stepless: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Max./min. pressure angle: 30° / 14°30` Max./min. helix lead at 24 teeth: 6000 / 200 mm Max. helix angle, both sides: 45° Grinding worm speed: 1900 rpm Without dressing device Equipment: Approx. 77 various change gears, extension tubes, and miscellaneous accessories Two of these machines are available for sale. Both machines are operated via two shared control cabinets and a common exhaust system.