BŪGNO SMULKINTUVAS

ZENO ZTH 1600 / 1400 E 550

Gamybos metai: 2025, Sąlyga: naujas, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for secondary size reduction of wood chips. More details are available after a test run with your material. Our granulators are used for the size reduction of a wide range of materials such as plastics or wood. Shredders and granulators are suitable for various shredding tasks. For example, injection moulding machines generate scrap parts and sprues that need to be reprocessed. At blow moulding machines, in addition to scrap parts, lumps and start-up hoses are produced. Among other things, blow-moulding materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes can be processed. The material is fed from above via a hopper into the cutting mill's grinding chamber. Inside, a rotor equipped with cutting knives operates. The material is shredded between the rotating knives and fixed stator knives in the grinding chamber housing until it passes through the screen located under the rotor as defined regrind. *Option: The granulate is subsequently transported, usually pneumatically, into big bags, silos, or other containers. The price applies only to the size-reduction system as shown in picture 1 – fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput up to 120 kg/h when processing plastics *highly dependent on material and screen selection Application example: Shredding PE 1000 plastic Feed material: approx. 40 mm strand length After granulation: approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) For G 30 wood chip secondary size reduction, much higher throughput can be achieved. Up to 400 kg/h maximum with a 10 mm screen.*when fed evenly, e.g., by conveyor belt or auger Details after testing with approx. 30 kg material. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Extraction port: 100 mm Screens: 6, 8, and 15 mm – additional screen sizes available Price per screen: €390 Price for replacement knife set: €679 Suitable for, e.g.: - All kinds of plastic waste Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs Ksdjd N Dn Djpfx Afpond etc. Parts from injection moulding, blow-moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger units available as an option: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *dependent on screen and material Opening: 620 x 400 mm Special net price: from €24,995 net *optionally with suitable extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *dependent on screen and material Opening: 620 x 500 mm Special net price: from €29,795 net *optionally with suitable extraction/conveying system --- For proper machine configuration, please provide the following information: - Length x width x height of the input material? - Screen size, to what final particle size (mm) do you require? - Required hourly throughput in kg? - Wall thickness in mm? - Material description Photos can also be helpful.

Sąlyga: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 160 m/min, valdiklių gamintojas: Mircotec, ruošinio ilgis (maks.): 5 500 mm, ruošinio plotis (maks.): 700 mm, ruošinio aukštis (maks.): 100 mm, ašies variklio galia: 90 000 W, sukimosi greitis (maks.): 3 100 aps./min, Automatinė BFB kartavimo linija, medienos apdirbimo staklės su „Mircotec“ valdymu. Pagaminimo metai 2004/2021. Didžiausias kartavimo plotis 700 mm, kartavimo storis 100 mm, 90 kW pavaros variklis. 4 reguliuojami pjūklai. Pridedamas požeminis skersinis konvejeris, statmenas konvejeris, kapavimo stalas, matavimas/lygiavimas, kartavimo agregatas, pleištinis atskyriklis ir lentų rūšiavimas. Linija visiškai veikianti ir geros būklės. Atnaujinta 2021 m. Knodpfx Asxfb Ecofpod

Sąlyga: visiškai atnaujintas (naudotas), LBL Brenta span saw Knodpfeucp N Asx Afpsd CT 700 Maximum cutting depth = 150 mm Maximum cutting height = 650 mm 9 knives Free central disc, overheating protection Clearance = 800 mm Fast, precise positioning via servo motor

Sąlyga: naujas, Sheet thickness 2.5 mm Roll diameter 98 mm Throat depth 160 mm Kedpfxofv H Eho Afpend Total power requirement 1.5 kW Machine weight approx. 0.35 t Space requirement approx. 550x1400x1500 mm Supplied with: • Manual version • 4 sets of rolls • Foot control • Braking motor • Emergency stop

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SK-K-24001, 1 optimized cross-cutting line with scanner Manufacturer: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cutting system Knedpfx Afewya Syepod with 1 x OptiCut 450 and feeding system F 100 featuring LuxScan CombiScan+ C 200 with curvature measurement The system was operational until 2024, has been professionally dismantled, and can be inspected in this condition.

Sąlyga: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 100 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 000 mm, veleno greitis (maks.): 3 000 aps./min, stalo ilgis: 1 800 mm, stalo plotis: 2 000 mm, padavimo ilgis W ašis: 700 mm, ruošinio svoris (maks.): 12 000 kg, frezos veleno ilgis: 700 mm, FPT CASTEL RED HEIDENHAIN TNC 430. Baujahr 2007. X-Achse = 3.100 mm Y-Achse = 2.000 mm Z-Achse = 1.000 mm Arbeitstisch: 2.000 x 1.800 mm, 12 t Tragfähigkeit Kühlung durch die Spindel. X-Achse (Verfahrweg Ständer): 3.100 mm Y-Achse (Vertikalverfahrweg Fräskopf): 2.000 mm Z-Achse (Spindelhub): 700 mm Kedpfxowdiu Ee Afpend W-Achse (Längsverstellung Ständer in Spindelrichtung): 1.000 mm Spindeldurchmesser: 130 mm Spindelaufnahme: ISO 50 Spindeldrehzahl: bis 3.000 U/min Spindelmotorleistung: 37 kW Rundtischgröße: 1.800 x 2.000 mm Tischbelastung: 12 t C-Achse: 360.000° (kontinuierlich drehbar)

Sąlyga: beveik kaip naujas (naudotas), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL PARAMETERS: cutting width: 350 mm cutting height: 160 mm motors: 37 and 45 kW feed motor: 3 kW lower shaft width adjustment maximum blade diameter: 280 mm Knjdpfx Afjqy E Rljpod spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm track width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min central lubrication minimum workpiece length: 600 mm electric height adjustment top and bottom shaft height adjustment six upper pressure rollers mechanical roller pressure town anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Sąlyga: geras (naudotas), Gamybos metai: 1993, veikimo valandos: 3 467 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 165, bendras svoris: 18 000 kg, bendras plotis: 2 550 mm, bendras ilgis: 12 000 mm, bendras aukštis: 3 000 mm, transporto plotis: 2 550 mm, transporto ilgis: 12 000 mm, transporto aukštis: 3 000 mm, galia: 243 kW (330,39 AG), Secondary shredding basket 150mm rhombus Kedpfx Afowh Tdxepjnd

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 230 mm, Y ašies eiga: 2 700 mm, Z ašies eigos atstumas: 700 mm, greitas poslinkis X ašimi: 12 m/min, greitas poslinkis Y ašis: 12 m/min, greitasis eiga Z ašyje: 12 m/min, X ašies padavimo greitis: 12 m/min, Y ašies padavimo greitis: 12 m/min, padavimo greitis Z ašis: 12 m/min, stalo plotis: 2 400 mm, stalo ilgis: 4 000 mm, stalo apkrova: 14 000 kg, bendras svoris: 38 500 kg, veleno greitis (min.): 5 200 aps./min, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Travel range X-axis: 4,230 mm Travel range Y-axis: 2,700 mm Travel range Z-axis: 700 mm Feed rate X-axis: 12 m/min Knodevt S Eaopfx Afpjd Feed rate Y-axis: 12 m/min Feed rate Z-axis: 12 m/min Table length: 4,000 mm Table width: 2,400 mm Spindle speed (min.): 5,200 rpm Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Distance between columns: 2,800 mm Table load capacity: 14,000 kg Spindle head position: Vertical Workpiece weight (max.): 14,000 kg Total weight: 38,500 kg Equipment: - Infinitely variable spindle speed - Chip conveyor - Internal coolant supply - Tool magazine for 40 tools - Tool holder SK 50 - Heidenhain TNC 530 control Subject to errors in the technical data. The scope of accessories is exclusively and strictly limited to the items described in the article's textual description. Any other accessories shown, e.g. for illustration purposes, are expressly not included. The machine is sold as-is without any warranty or guarantee. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm Ksdpsu Atmuofx Afpsnd - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location