Polipas patraukti

xyz 3000/MMG

Sąlyga: naudotas, Gamybos metai: 1999, x-axis travel 2000 mm y-axis travel 800 mm z-axis travel 850 mm Control system: HEIDENHAIN TNC 360 Total power requirement: / kW Machine weight approx.: / t Nkodpsv H Ertjfx Agieu Space requirement approx.: / m

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 2 h, bendras ilgis: 12 200 mm, bendras aukštis: 2 890 mm, bendras plotis: 2 440 mm, galia: 1,65 kW (2,24 AG), kuras: dyzelinas, Įranga: Tipinė plokštelė prieinama, These are three emergency power generators, each with 2,000 kVA / 1,600 kW continuous output at cos phi 0.8. Voltage: 10 kV, frequency: 50 Hz. An inspection is possible in 49733 Haren. Engine manufacturer: Perkins Generator manufacturer: Stamford Design: 40" soundproof container with a noise level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (L x W x H) Weight: approx. 35,000 kg Nodpfx Agjqqhuyjijku Data sheet attached (DE and EN). Each container is also fitted with a 2,000 L tank for initial diesel supply. The gensets are regularly load-tested.

Sąlyga: geras (naudotas), Gamybos metai: 1989, mašinos/transporto priemonės numeris: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42, each in 4/42mm configuration (5x available) Nkjdor I Am Hepfx Agisu with Müdata, Mütrans, without creel, exceptionally clean machines from Germany, 2nd hand NF42 in 4/42mm from 1988–1990 AN. No.: 88.04.017 H ex Alge, with Müdata, 16 shafts, very clean, €7,000 AN. No.: 88.04.169 D ex Alge, with Müdata, 16 shafts, very clean, €7,000 No. 213 AN. No.: 89.04.019 B ex Alge, with Müdata, 16 shafts, very clean, €7,000 No. 223 AN. No.: 89.04.046 B ex Alge, with Müdata, 16 shafts, very clean, €7,000 AN. No.: 90.00.066 B ex Alge, with Müdata, 16 shafts, very clean, €7,000

Sąlyga: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, galia: 75 kW (101,97 AG),

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: ribota funkcionalumas, disko skersmuo: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800x1,500x2,200 mm Working disc diameter: 525 mm Njdpoh Invrofx Agisku Maximum disc ring width: 175 mm Maximum workpiece dimension: 170 mm Working disc speed: 45/70/90/140 rpm Main drive power: 4.0 kW Connection: 400V/50Hz Emergency stop switch Conventional control with operator panel Fully-featured lapping machine, conventional control

Gamybos metai: 1987, Sąlyga: naudotas, Kehren Rotary Table Type RS 7C, used Manufacturer: Kehren, Honneff Ref.: 4179 Nkodpfx Aohgmwgegieu Year of manufacture: 1987 Control: Siemens 3G PLC: Siemens S5 Grinding motor: BBC QUB 200 Rotary table diameter: 750 mm Grinding head diameter: 460 mm Operator panel with screen Coolant system Flush pump Coolant pump Automatic paper band filtration system Control cabinet

Sąlyga: naudotas, Gamybos metai: 1991, bendras ilgis: 1 520 mm, bendras plotis: 720 mm, galia: 30 kW (40,79 AG), Fully overhauled, lubricated, and ready for operation. Automatic two-shaft hydraulic shredder designed for crushing and disentangling metal chips, plastics, wood, electrical cables, and other materials. It is controlled by a PLC that monitors sensors, manages shaft rotation, and automatically activates the reverse function, if several blockages occur within a short period, the shredder shuts down. In addition, the unit automatically switches off after a set period when operating without load.The crushing blades have been replaced with new ones. Nkjdpfswk Egwsx Agiju Technical Highlights: Power 30 kW Max hydraulic pressure: 250 bar Torque: 11,780 Nm 2 crushing shafts with blades Hydraulic drive with gear transmission (Valmet BB 3150CC) Automatic blade pressure adjustment (disc spring system)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 3 500 h, Funkcionalumas: visiškai funkcionalus, pjovimo jėga: 630 t, galia: 90 kW (122,37 AG), tuščias svoris: 36 500 kg, bendras plotis: 2 400 mm, bendras ilgis: 9 500 mm, bendras svoris: 40 000 kg, pjovimo ilgis (maks.): 1 600 mm, paskutinio kapitalinio remonto metai: 2024, įvesties srovės tipas: trifazis, darbinis slėgis: 220 juosta, Scrap Shear MS-6300e (scrap shear with electric motor) without operating fluids. A 250kW diesel generator can be offered separately. Model: MS-6300e Shearing force: 630 t Cutting length: 1,600 mm Discharge height: 500 mm Power: 110 kW Capacity: 12–17 t/h Machine weight: 40 t (+diesel generator 4 t) Hopper size: 3,850 mm x 2,600 mm x 1,500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required Function: Scrap is loaded into the feed area with the help of an excavator. Due to the horizontal feed section and the weight of the scrap, it falls down into the loading chamber and into the cutting area. The scrap is compacted against the front wall and cut by the horizontally moving tool carrier through the blades on the end wall. As the tool carriage moves horizontally, the processed material is pushed out through the blades at the front of the chamber. When returning to the rear position, the loaded scrap shifts by its own weight into the interior of the shear. Nksdpsuu Upgefx Agisu Scrap shears are available in various configurations to suit customer requirements, and the output size can be selected (for new orders). Inspection and test operation are possible.

Sąlyga: naudotas, Magnetic Drill, Hand Drill - Magnetic Base: Magnetor type PS 32 L - Drill Machine: AEG type HBE-IV - Spindle Taper: MK2 - Max. Drill Diameter: Ø 23 mm - Power Supply: 265 V / 200 Hz Nsdpfx Agofc R D Aoijku - Dimensions: 700 x 300 x H670 mm - Weight: 49 kg

Gamybos metai: 1985, Sąlyga: dilaminuotas dirbtuvėje (naudotas), REFORM type AR 10 model 40H Surface Grinding Machine Year of manufacture: 1985 30 kW grinding motor Control system: Modicon Njdpjd E Np Eefx Agioku 6-stage magnetic control Magnet size: 1000 x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pcs Grinding motor feed: Infinitely adjustable from 0.01 mm to 0.1 mm Hydraulic oscillation drive New supply cables between machine and control cabinet