Žirklinis pakėlimo stalas

WTT Fördertechnik E 05.08.5.1.0.RB

Sąlyga: naudotas, Gamybos metai: 1978, Drilling capacity in steel (diameter): 40 mm Arm length: 345 mm Drilling stroke: 200 mm Table clamping surface: 720 x 560 mm Spindle speed: 60 - 765 rpm Feed rate: 0.15 - 0.2 - 0.3 - 0.36 mm/rev Caodjv Ehftjpfx Admea Tool holder: MT 4 Total power requirement: 3.0 kW Machine weight approx.: 0.4 t Drilling machine with: - Automatic feed - 2 gearbox stages - Left/right rotation - Foot switch - Coolant pump - Machine lamp

Sąlyga: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Csdpfx Aoiidm Nedmeaa Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Maszyna do osadzania kołków z pistoletem operacyjnym do jednoczesnego nakładania kleju i wprowadzania kołków. Standardowe kołki Ø8 mm Cjdpfx Adequ N U Dsmoaa Długość kołków: 25–80 mm Nominalna wydajność: 1 kołek/sekundę (wraz z aplikacją kleju) Stosuje kleje PVA na bazie dyspersji wodnej o lepkości 200–400 mPa 1 szt. zbiornik na klej o pojemności 8 kg 1 szt. zbiornik na wodę o pojemności 8 kg Maksymalne ciśnienie: 5 bar

Sąlyga: naudotas, Hydraulic Low-Profile Scissor Lift Table FLEXLIFT FLUNDER Type 1500 / 100 (without hydraulic power unit) Year of manufacture: 1991 Rated load capacity: 1500 kg Tested lifting capacity: 1000 kg (at approx. 350 bar) Platform size: 2100 x 1400 mm Lift stroke: max. 930 mm Installation height (lowered): 100 mm (with installation frame) Installation height (raised): 1030 mm Hydraulic operating pressure: 350 bar = lifting capacity 1000 kg Hydraulic motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Mechanical-hydraulic safety limit switches stop the lowering operation when the safety bar is triggered - Without hydraulic power unit Cjdpfx Ael Nbqcodmsaa - Without electrical control Installation frame length: 2270 mm Installation frame width: 1580 mm Installation frame height = installation height (lowered): 100 mm Net weight of lift table: 500 kg Good condition

Sąlyga: naudotas, Gamybos metai: 2017, Table width: 3000 mm Table length: 1500 mm Torch heads: 1 Plasma cutting system: HEZINGER PlasmaLine EPJ / ECKERT including extraction unit PFC-4 Plus 4kW F3800 Technical data HYPERTHERM Powermax 125 plasma cutting unit: Cutting capacity: Recommended: 38 mm Maximum: 44 mm Severance cut: 57 mm Output current: 30–125 A Power supply: 400 V / 36 A Compressed air requirement: 260 l/min Air pressure: 5.9 bar Caodpfjucpnljx Admea Dimensions: 592 x 274 x 508 mm Weight: 49 kg

Sąlyga: naujas, Max. welding current: 70 A Max. cutting capacity: 25 mm Open circuit voltage: 120 V Minimum compressed air connection: 4 bar Connected load: 9.2 kW Supply voltage: 400 V Weight: 0.28 kg Dimensions (LxWxH): 1.7 x 1.0 x 1.2 mm Plasma cutting machine with cutting table, type: CEBORA Axial 607 Codpowfyq Hsfx Admjaa Includes additional hose package

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, ritinio plotis: 700 mm, bendras plotis: 800 mm, bendras ilgis: 2 600 mm, galia: 1,5 kW (2,04 AG), 2 WTT conveying systems – hydraulic scissor lift tables with powered roller conveyor. Type: E.20.16.8.2.0.RB Length: 2,600 mm Cjdpjuyhltsfx Admjaa Width: 800 mm Roller width: 700 mm Load capacity per unit: 2,000 kg Max. lift height: 2,000 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, 2 pcs. ZIMZ scissor lift platform / lifting table / scissor lift table with chassis Load capacity: 1,000 kg Casdpfx Adjv Dychsmoa Hydraulic operation Roller conveyor length: 2,500 mm Entry height on roller conveyor (in transfer area): 280 mm Max. lifting height: 1,100 mm Usable lift: 800 mm With pneumatic brake for rollers With rails Foot protection contact strips (safety strips) Overall dimensions: Length 2,500 mm, Width 615 mm, Height 280 mm Integrated hydraulic power unit Operating voltage: 400V, 50 Hz Price per unit