Laikiklis - 3 žandikaulių laikiklis

WMW 600x3

Gamybos metai: 1987, Sąlyga: naudotas, Maximum grinding length: 630 mm Maximum grinding width: 200 mm Workpiece height: ... mm X-axis travel max.: 250 mm Y-axis travel max.: 710 mm Distance spindle center to table max.: 500 mm Table clamping area: 0.25 m² Maximum table load: 1.1 t Table speed - stepless: 2 - 18 m/min Automatic cross feed: ... Dust extraction: 0.25 kW Coolant pump: 0.09 kW Total power requirement approx.: 4.5 kW Machine weight approx.: 1.3 t Required space approx.: 2400 x 1600 x 1900 mm Adjustments: Y-axis: 1 scale division = 0.005 mm Z-axis: 1 scale division = 0.002 mm Manual cross adjustment (within the 250 mm Y-axis range): 80 mm Speeds: Nwjdsgbgawopfx Agiec Automatic cross feed Travel in Y direction: - intermittent: 0.2 - 20 mm/stroke - continuous: 0 - 4 m/min Grinding wheel diameter max.: 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digital display for 2 positions/vertical infeed

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Apsisukimo diametras virš lovos: 400 mm Apsisukimo diametras virš skersinio stalo: 220 mm Atstumas tarp centrų: 1500 mm Veleno skylė: 50 mm Sukimosi greitis: 12,5 – 3150 aps./min. Galia: 5,5 kW Energijos poreikis: 16 kVA Matmenys (Ilg. x Pl. x Aukšt.): 2900 x 1000 x 2200 mm Svoris: apie 1600 kg Įranga, priedai - 3 žandikaulių griebtuvas, D200 mm tvirtinimo griebtuvas - 4 padėčių įrankių laikiklis - Užpakalinis centras - Variklio apkrovos indikacija - Greitos eigos judesiai - Pavaros sistema per sankabą - Veleno stabdis - Galinė apsauga nuo taškymosi - Grūdintos ir šlifuotos kreiptuvės puikios būklės - Atraminis lankas - Aušinimo skysčio sistema - Dokumentacija Nwjdpfx Aexiymtsgijc Staklės naudotos nedaug, labai geros būklės. Judėjimo matavimo sistemos nėra įrengta.

Sąlyga: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Njdpfsh A Sfdsx Agijwc Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Stalo dydis: 800 x 240 mm Darbinis paviršius: 730 x 210 mm „T“ formos griovelio dydis ant stalo: 14 mm (M12) Sūkių diapazonas: 75 – 3200 aps./min Gręžimo geba ketuje: 45 mm Gręžimo geba pliene: 32 mm Išilginė eiga (X): 560 mm Skersinė eiga (Y): 190 mm Vertikali eiga (Z): 350 mm Įrankių laikiklis: ISO40/Morse 4 Atstumas tarp veleno ir kolonos: 460 mm Atstumas tarp veleno galo ir stalo paviršiaus: 445 mm Veleno eiga: 120 mm Bendras mašinos aukštis aukščiausioje Z padėtyje: 1450 mm Velenas reguliuojamas +/-90 laipsnių Variklio galia: 1,1/1,5 kW / 400 V Mašinos svoris: 480 kg Išmatavimai: 1280 x 960 x 2100 mm Priedai Njdpfxoxz D Nps Agijwc - Sriegimo funkcija - 3 ašių atvaizdavimo sistema - Y+Z ašių apsaugos - ISO40 griebtuvo adapteris - Integruotas skaitmeninis gylio matuoklis - Automatinė vientisa ir greitoji eiga X ašyje - Motorizuotas veleno stiebo pakėlimas ir nuleidimas - Halogeninė lempa - Ketaus mašinos pagrindas Mašina yra visiškai nauja - niekada nebuvo naudota gamyboje.

Sąlyga: geras (naudotas), Gamybos metai: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine, model making mill - Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories - Rotatable cross table: 490 x 400 mm - Travel (X/Y/Z): 320/385/430 mm - Spindle taper: SK30 - Drive: 1.1 kW - Speeds: 560 to 14,000 rpm, 8 steps - Accessories: included, see photos Nsdjnzpx Rspfx Agijwc - Dimensions: 1000/680/H1970 mm - Weight: 477 kg

Sąlyga: naudotas, Gamybos metai: 1975, Technical details: Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Turning length: 1,100 mm Centre height: 180 mm Nwjdpfx Asu Ix E Hegiec Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis (longitudinal): 0.08 - 1.10 m/min Feed range y-axis (cross): 0.028 - 0.40 m/min Tailstock quill taper: MK4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix tool holder - Coolant system with pump - Chuck guard - Chip tray - Chip guard Accessories: - Chuck key - Tool holder - 2 gears

Sąlyga: labai geros būklės (naudotas), Knuth UFM 2 universalioji frezavimo staklė Techniniai duomenys X ašies eiga (rankinė) 800 mm X ašies eiga 750 mm Y ašies eiga 300 mm Z ašies eiga 400 mm Stalo dydis 1320x320 mm T formos grioveliai 5x14x63 mm Nsdpfxenfu Rie Agiswc Pavaros Y ašies eiga (8) 20 - 360 mm/min Z ašies eiga 600 mm/min Veleno apsukos (12) 58 - 1800 min-1 Vertikalaus veleno konusas SK 40 Atstumas tarp veleno galo ir stalo 0 - 400 mm Galvos pasukimas 45° Horizontalaus veleno konusas SK 50 Pavaros Pagrindinio variklio galia 4 kW Z ašies variklio galia 0,75 kW Pavaros variklio galia 0,55 kW Aušinimo siurblio variklis 0,09 kW Aušinimo skysčio siurblio našumas 25 l/min Matmenys ir svoris Matmenys 1900x1720x1750 mm Svoris 2100 kg Galimas finansavimas per mūsų banką. komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kaina – pagal užklausą!

Gamybos metai: 2009, Sąlyga: naudotas, Technical Details: Tool holder: Ø 54 mm Voltage: 3-phase AC 400V / 50–60 Hz Compressed air connection: 6 bar Total power requirement: 11 kW Total weight approx.: 120 kg Dimensions L x W x H: 0.7 x 0.65 x 1.7 m Induction shrink-fit machine with water cooling (30-litre tank integrated in the housing) Application: for ultra-fast tool changing via targeted induction heating Nwjdpfx Aswp I S Hjgijc Cooling medium: Emulsion For tools Ø 3–50 mm (solid carbide) and Ø 6–50 mm (HSS) Tool holder Ø 54 mm Runout accuracy < 0.003 mm ThermoGrip shrink chuck ISGS 3200-1, Ø 3–32 mm Operation via control panel

Sąlyga: naujas, TC 165 x 750V Image shows MIOTAL® TC 180 x 1000 Centre distance: 750 mm Centre height: 165 mm Swing over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical speed ranges: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Cross feeds X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral pitch threads: (32) 7.5 - 112 Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance certificate according to DIN - Precise, hardened and ground guideways Nedpfx Agjir Igwoiowc - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric brake system (V models) - Torsion-resistant machine beds made from MEEHANITE quality cast iron, stress-relieved and heavily ribbed for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Impulse pushbutton for main spindle - CE / IEC and German documentation and service Standard equipment (included accessories): - Machine stand with splash guard rear wall - 3-jaw chuck - 4-position toolpost - Foot pedal with mechanical brake - Coolant system - Chuck and spindle guard compliant with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MK3 - 1 test certificate - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle operating tools Available options for this lathe: - 3-axis digital readout - Quick-change toolpost system Multifix Also available as a geared version

Gamybos metai: 2009, Sąlyga: dilaminuotas dirbtuvėje (naudotas), The roller bed is also available for rental (including trial rental). Njdpfomk Iktox Agiowc Maximum load: 100t per set, consisting of 1x drive unit and 1x idler unit Workpiece diameter: 500 – 7,500 mm Rotational speed: approx. 130 - 1,250 mm/min Roller material: polyurethane Control: wired hand pendant Additional available options, e.g.: additional idler units, foot switch