Pavarų frezavimo staklės

WMW MODUL ZFWZ 1250/3

Sąlyga: beveik kaip naujas (naudotas), tekėjimo skersmuo: 1 500 mm, MAXIMUM WORKPIECE DIAMETER: 1600 mm. MAXIMUM WORKPIECE LENGTH: 3000 mm. Njdsr Ui R Nspfx Af Newb SPINDLE DIAMETER: 83 mm. OUR MACHINE IS FULLY OPERATIONAL AND TROUBLE-FREE. ALL SPEEDS AND AUTOMATIC FEEDS ARE IN VERY GOOD CONDITION.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 66 600 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer you the following: Technical Data: Control system: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Max. table load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary tilting table including table cooling - BLUM NT laser tool measurement system - Calibration arbor with tool holder - Wireless touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper-belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, incl. rotating sight glass, air purge, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system - Selection and deselection of handling system via switch on the machine control panel - incl. additional rinsing inside the working area - incl. machine preparation for job management - incl. control panel arrangement on the left - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology Nedpsxgnz Tjfx Af Nswb - incl. rotary union extended to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change and prior sale. Errors excepted!

Sąlyga: naudotas, Gamybos metai: 2007, pjovimo plotis (maks.): 1 060 mm, pjovimo aukštis (maks.): 1 060 mm, Bandsaw Kasto HBA 10×12 Year of manufacture 2007 Cutting ranges: Round cutting area: 1,060 mm Square cutting area: 1,060 x 1,060 mm Flat cutting area: 1,060 x 1,260 mm Clamping range: 300 – 1,260 mm Minimum workpiece dimension: approx. Ø 300 mm Minimum cut length: 10 mm Minimum remnant length (single cut): 20 mm Minimum remnant length (automatic operation): 100 mm Table load capacity max. 50 tons Table travel: 6,100 mm Total drive power: 20 kW Saw motor: 11 kW Cutting speed infinitely variable at 50 and 60 Hz: 12 – 90 m/min Automatic single feed length: 2,100 mm Clamping force of machine vice: 50,000 N Saw blade dimensions: 11,430 x 80 x 1.6 mm Cutting feed: steplessly adjustable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: via easily replaceable brush, motor-driven This offer is exclusively for commercial customers as defined by §14 BGB Nsdpowk D Efofx Af Nswb No sale to private individuals

Sąlyga: naudotas, Gamybos metai: 2007, Wheel Diameter – max. 500 mm Hypoid Adjustment ±70 mm Axis Cross Angle 90° Y-Axis Distance 150 – 350 mm Z-Axis Distance 120 – 340 mm Speed Range – stepless 0 – 5,000 rpm Torque at Spindle 57 Nm Taper 99.2 mm Pulling Force – Tool Clamping 23,000 N Maximum Braking Torque 93 Nm Total Connected Load 20 kVA Total Power Requirement 15 kW Machine Weight approx. 6 t Space Requirement approx. 2.35 x 2.24 x 2.5 m Working Area: Max. Ring Gear Diameter – 500 mm Hypoid Adjustment X (v) – ±70 mm Axis Angle – 90° Distance Y-(H) Axis Ring Gear/Pinion Spindle Flange – 150 ... 350 mm Distance Z-(J) Axis Pinion/Ring Gear Spindle Flange – 120 ... 340 mm Pinion Spindle Head: Speed Range, stepless – 0 ... 5,000 rpm Torque – 57 Nm at n= 0 ... 1,240 rpm Torque – 54 Nm at n= 1,240 ... 5,000 rpm Nwodpeukitxofx Af Neb Internal Taper (with adapter) – Ø99.2 mm (#39) Pulling Force for Tool Clamping max. – 23,000 N Ring Gear Spindle Head: Speed Range, stepless – 0 ... 3,000 rpm Torque – 95 Nm at n= 0 ... 750 rpm Torque – 93 ... 24 Nm at n= 750 ... 3,000 rpm Internal Taper (with adapter) – Ø99.2 mm (#39) / (Ø35.6 mm (#14)) Pulling Force – Max. 23,000 N Maximum Ring Gear Braking Torque – 93 Nm up to 3,000 rpm pinion speed at i = 1:4 Maximum Ring Gear Braking Torque – 93 Nm up to 1,200 rpm pinion speed at i = 1:1.6 Maximum Ring Gear Braking Torque – 59 Nm up to 1,200 rpm pinion speed at i = 1:1 Electrical Specifications: Total Connected Load – 20 kVA (effective machine capacity) Voltage – 3 x 400V (other voltages on request) Voltage Tolerance – ±10% Frequency 50 Hz (other frequencies on request)

Sąlyga: labai geros būklės (naudotas), Desktop Metal 3D Printer Complete System We offer you a Desktop Metal 3D printer complete system. 3D Metal Printer Studio System from Desktop Metal Complete System: 3D Printer + Debinding Machine + Sintering Furnace Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating Condition: Used (Good) Year of Manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Specifications: - Printable Materials: Metal - Technology: FDM - Application: Industrial - Other Features: Suitable for office use - X-Axis Travel: 30 cm (12 in) - Y-Axis Travel: 20 cm (8 in) - Z-Axis Travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, this printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing and enables new features such as the use of closed-cell infills for lightweight yet strong parts. 1.2 Desktop Metal Studio Debinder (Delamination Machine) - Fully automatic debinding - Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The Debinder prepares green parts for sintering by dissolving the primary binder. With a low-emission design, it requires no external ventilation and is safe for office environments. Automatic liquid distillation and recycling means no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace - Hybrid technology (microwave & conventional heating elements) - Build Volume: 305 x 205 x 205 mm - Carbon casing - Gas supply: 2 x 900 L gas bottles - Heating power: 20 kW Specifications: - Function: Sintering - Configuration: Chamber - Heat source: Gas - Other Features: High-temperature, automatic operation - Maximum temperature: 1,400°C (2,552°F) Description: Fully automated and designed to fit through an office door, the furnace provides industrial-grade sintering in an office-friendly package. Built-in, material-specific temperature profiles ensure uniform heating and cooling without the residual stresses often found in laser-based systems. Nodpfxsk Hz Nqs Af Nswb Condition: Used Scope of delivery: (See images) (Subject to technical changes and errors; all information is non-binding!) For further questions, we are happy to assist you by phone.

Sąlyga: naudotas, Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 700 mm, Y ašies eiga: 2 250 mm, Z ašies eigos atstumas: 1 300 mm, bendras plotis: 3 000 mm, bendras ilgis: 8 710 mm, bendras aukštis: 5 250 mm, ašies skersmuo: 130 mm, stalo apkrova: 16 000 kg, stalo ilgis: 2 200 mm, stalo plotis: 2 200 mm, bendras svoris: 40 000 kg, Accessories: Njdpfxsw Hr Hpe Af Newb 2 different heads 1 faceplate

Sąlyga: naudotas, Gamybos metai: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected in our facility. Free loading onto truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control system: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Maximum table rotation: 30 rpm Spindle speed: 20 - 8,000 rpm Gear steps: 2 Maximum workpiece diameter: 1250 mm Maximum workpiece height: 1580 mm Clamping surface: 800 x 800 mm Maximum workpiece weight: 1,500 kg Nwodew Ew T Sspfx Af Neb Pallet weight: 570 kg Maximum allowable pallet load difference: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction system Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30bar (new) 1x GEAR UNIT P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox*F1C-A25 (new) 1x Retrofit kit power module (new) 1x Lifting devices for the machine

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Nwedpfx Aoul Efmsf Njb Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Sąlyga: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Nodpfjt E Dbyex Af Nowb Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Sąlyga: naudotas, Gamybos metai: 1988, Funkcionalumas: nepatikrintas, Berstorff mixing mill 400 x 900 mm More details in the attached description! Nwjdpfx Ajr A Dfyjf Njb