Kreipiamųjų takų ir plokštumų šlifavimo staklės, kreipiamųjų takų šlifavimo staklės, lovos šlifavimo

WMW FRITZ HECKERT Aschersleben SZ 1000 x 1250 x 3000 / 344

Būklė: geras (naudotas), Gamybos metai: 2000, x eiga: 3500 mm y eiga: 1600 mm z eiga: 1200 mm Veleno apsukos: 250 - 3000 sūkių/min Įrankio laikiklis: ISO SK-50 Įrankių keitiklis: 40 vietų Greita eiga: 15 000 mm/min Padavimas: 5 000 mm/min Stalo matmenys – išilgai: 3860 mm Stalo matmenys – skersai: 1000 mm Valdymas: HEIDENHAIN TNCi530 Mašinos svoris apie 24 t Reikalinga erdvė apie 8000 x 5000 x 4000 mm Lajdpfsykvayex Alred Ši SORALUCE yra geros būklės ir 100% veikianti. Mašiną galima apžiūrėti pas pardavėją, pagal susitarimą, su įjungta elektra.

Būklė: geras (naudotas), Gamybos metai: 2007, Mašina yra labai geros būklės. Ledsxf Iamopfx Alrjad PROMOT krovimo ir iškrovimo stotis į pristatymo komplektą neįtraukiama. Prie mašinos yra įvairių įrankių / priedų. Techniniai duomenys apie mašiną pateikti paskutinėse dviejose nuotraukose.

Būklė: naudotas, Gamybos metai: 2001, Technical specifications: X-axis travel: 2500 mm Y-axis travel: 1000 mm Z-axis travel: 750 mm Table area: 3220 x 1000 mm Workpiece weight approx.: 3000 kg Spindle taper ISO: 50 Spindle speeds: 20 - 5000 rpm Ljdjvptmwspfx Alrsad Feed rate: 1 - 30000 mm/min Rapid traverse: 30 m/min Total power requirement: 40 kW Space requirements approx.: 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with HEIDENHAIN TNC 426 CNC control 30-station automatic tool changer RENISHAW touch probe Coolant system with through-spindle coolant (IKZ) and chip conveyor Various tool holders

Būklė: naujas, Gamybos metai: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to a variety of surfaces. It is a dry finishing process in which a fine powder made from resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring even adhesion to the surface and forming a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to provide a clean surface, which is essential for the powder to bond effectively with the substrate and produce a firm, long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spraying Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to deliver the powder from storage to the spray gun. Pretreatment Equipment Pretreatment systems are used to prepare the substrate before powder coating application. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder to melt, flow, and cure to form a durable surface. The oven typically features a conveyor or racks to transport coated parts through the oven chamber. Laodpfx Aswf Dpgelrod Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Būklė: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 1 000 mm, tekinimo skersmuo virš slankiojančio stalo: 710 mm, tekėjimo ilgis: 8 000 mm, Used heavy-duty lathe with extensive steady rest equipment – Ideal for pipe machining and long rollers! This robust conventional lathe, featuring an impressive turning length of 8,000 mm, was specifically designed for applications in pipe machining. The well-thought-out machine concept allows the tool to pass smoothly by the open steady rests—ideal for precise machining of long, hollow workpieces. Technical Highlights: • Swing over bed: 1,000 mm • Swing over cross slide: 710 mm • Centre height: 900 mm • Turning length: 8,000 mm • Spindle bore: 155 mm • Machine weight: approx. 18.2 tonnes • Main drive: 30 kW with frequency converter, infinitely variable Design Advantages: Lodpov Tnttsfx Alrjad • One-piece cast machine bed, artificially aged – for maximum stability and freedom from internal stresses • 5 hardened and ground guideways for highest precision • Infinitely variable longitudinal feed via ball screw – no Norton or tumbler gearbox • Tailstock traversing motorized with hydraulic clamping • Manually adjustable cross slide with trapezoidal lead screw • 4-position tool post, manually indexable • Compound slide guided by three ways – for exceptional running smoothness Steady Rests & Pipe Machining: • Various steady rests (fixed and travelling) optionally available • Motorized steady rest brackets with hydraulic clamping • Steady rest quill adjustment conveniently accessible from the operator side • Travelling steady rests can be installed on the left or right as required Application: Thanks to its thoughtful design, this machine is excellently suited for light to medium-duty cutting operations – particularly for precise pipe machining. The infinitely variable speed and feed control ensures high flexibility and operating comfort.

Būklė: labai geros būklės (naudotas), X ašies eiga: 10 000 mm, Y ašies eiga: 2 100 mm, Z ašies eigos atstumas: 1 300 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 30 m/min, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 36 aps./min, pasukimo diapazonas: 360 °, SHW PowerSpeed 5 Travel Distances • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle horizontal): 1,300 mm Control System • CNC Control: Heidenhain iTNC 530 Feed Rate • X, Y, and Z axes: 2 – 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Swivel Range Head Mount: 360 x 1 degree • Swivel Range Milling Head: 180 x 1 degree • Tool Holder: SK 50 DIN 69871 • Speed Range: 36 – 4,000 rpm o Intermittently 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Coolant System • Tank Capacity: 500 l About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ----- Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used drilling-milling machine – used metal milling machine – used metal mill – used metal milling machine – used cnc mill – cnc milling machines – cnc milling – milling machine – large-part machining – cnc large-part machining – milling – shw – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column type milling machine Lasdpexgq Aysfx Alred

Būklė: naudotas, Gamybos metai: 2010, Overview This bottle washing machine ARCADE GEL 6 was manufactured in 2010 by the German company GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and is being replaced due to an increase in required throughput. Technical Details • Rated output: 33,000 bottles/hour • Adjustable range: 13,200 – 36,300 bottles/hour • Chain pitch: 169 mm • Cell pitch: 110 mm • Bottle cells per row: 30 units • Total bottle cells: 7,860 units • Bottle cells loaded: 7,680 units Consumptions • Compressed air: 1 m³ • Steam (operation): 489 kg/hour • Steam (heating up): 4,430 kg/hour • Electrical power: 48.4 kW • Water: 7.35 m³/hour Laodpjt Ul Exsfx Alrjd Bath Volumes • Pre-soaking: 2,263 l • Pre-lye: 7,240 l • Lye 1: 31,755 l • Lye 2: 350 l • Hot water 1: 350 l • Hot water 2: 350 l • Cold water: 350 l

Būklė: naudotas, System: Used piston diaphragm high-pressure pump / feed pump Lajdodkdi Tepfx Alrsd Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Būklė: paruoštas naudoti (naudotas), X ašies eiga: 3 500 mm, Y ašies eiga: 2 500 mm, Z ašies eigos atstumas: 1 250 mm, stalo apkrova: 12 000 kg, ašies skersmuo: 130 mm, veleno greitis (min.): 10 aps./min, veleno greitis (maks.): 2 500 aps./min, stalo ilgis: 2 200 mm, stalo plotis: 1 800 mm, padavimo ilgis X ašis: 3 500 mm, padavimo ilgis Z ašis: 1 250 mm, Veleno skersmuo: 130 mm X ašies eiga: 3.500 mm Y ašies eiga: 2.500 mm Z ašies eiga: 1.250 mm B ašis (stalas): 360º W ašies eiga (hulsas): 800 mm Stalas: 2.200 x 1.800 mm Didžiausia stalo apkrova: 12.000 kg CNC: Heidenhain 424 M Pagrindinio veleno apsisukimai (2 diapazonai): 10 - 2.500 Aušinimo skysčio talpa: Taip Įrankių tipas: BT 50 Ljdpfx Alsy Hgvrjrjad Svoris: 42.000 kg Matmenys: 6.460 x 6.960 x 4.400

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1979, VTL BERTHIEZ (Prancūzija) TM 500 SP Modelis: TM500 8P Pagaminimo metai: 1979 Griebtuvo skersmuo: 6300 mm Didžiausias tekinimo skersmuo: 15000 mm Didžiausias detalės aukštis: 4000 mm Sijos eiga: 3600 mm Pagrindinio variklio galia: 100 kW Didžiausias ruošinio svoris: 80 t Šoninio laikiklio skerspjūvis: 360x360 mm Lodpfox Dbydsx Alrsad Šoninio laikiklio eiga: 2500 mm Staklių svoris apie 230 t Yra vaizdo įrašas Galimos frezavimo ir dantavimo galvutės