Sunkiasvorė priekaba

WMT D5/2 x 5

Būklė: naujas, Load capacity: 30,000 kg Length: 6,000 mm Width: 2,500 mm Height: 823 mm Rear axle: steerable Hsdpfx Abefrzvwovjnl Front axle: steerable Tyre dimensions: 425 x 260 / dual (mm) Machine weight: approx. 3.2 t Space requirement: approx. 7.9 x 2.5 x 0.823 m Heavy-duty trailer equipped with: - double steering - small turning radius - tip-over protection due to steering angle limitation - very robust, resulting in low maintenance requirements - swappable drawbar, length 1,320 mm - impregnated wooden deck - standard paint finish varies; available in your RAL colour on request. The pictures show a 30 t trailer with 8 m length. The technical drawing is correct. Other load capacities and dimensions available on request—please contact us.

Būklė: naudotas, labai graži IXION BST 13 stalinė gręžimo staklės Stalinė gręžimo staklės IXION BST 13 Metai: 1971 – Serijos nr. 37919 Hnjdpfjxp H Dxsx Abvjl Matmenys: 220 x 400 x 820 mm Svoris: 50 kg Online vaizdo apžiūra per WhatsApp – MS Zoom – Telegram Sandėlyje Emskirchen/Niurnberge – Galima iškart atsiimti – Galima išbandyti

Būklė: naujas, Load capacity: 10,000 kg Length: 5,000 mm Width: 2,000 mm Hsdpfx Abjfrzvasvonl Height: 725 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight: approx. 1.2 t Dimensions (L x W x H): 6.7 x 2.0 x 0.6 m Heavy-duty trailer featuring: - Twin turntable steering system - Tight turning radius - Anti-tip design with steering angle limiter - Robust and low-maintenance - Swappable drawbar, 1,320 mm in length - 50 mm impregnated timber platform - Standard paint finish may vary. Custom RAL colour available on request. Other load capacities and dimensions available upon request. Please contact us for details. Price on request

Būklė: naujas, Load capacity: 30,000 kg Length: 6,000 mm Width: 2,500 mm Height: 823 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 / twin, mm Machine weight: approx. 3.2 t Space requirement: approx. 7.9 x 2.5 x 0.823 m Hnedpfx Abjfrzvzovol Heavy-duty trailer with: - Double steering (turntable system) - Small turning radius - Tip-over protection due to steering angle limiter - Very robust design, resulting in low maintenance - Interchangeable tow bar, length 1,320 mm - Impregnated wooden deck - Standard paint finish varies. On request in your custom RAL colour. Pictures show a 30t model with 8m length. Technical drawings are correct. Looking for different load capacities or dimensions? Please contact us.

Būklė: naudotas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 14 000 mm, Y ašies eiga: 4 500 mm, Z ašies eigos atstumas: 1 900 mm, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of manufacture: 2023 Capacities / Travel distances: Longitudinal (X): 14,000 mm Vertical (Y): 4,500 mm (*5,076.5) Cross (Z): 1,900 mm * Using the two horizontal positions of the automatically indexing milling head, the vertical machining capacity can be extended by 576.5 mm. Clamping table (2 units): Length: 6,000 mm Width: 3,000 mm Number of T-slots on the table surface: 12 T-slot width: 22 mm Distance between slots: 250 mm FIBRO Rotary & Sliding Table: Dimensions: 3,000 x 3,000 mm Sliding axis: 1,500 mm Max. table load: 40 t Year of manufacture: 2002 Coating/Finish: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Big plus Drawbar: DIN 69872 Form A Main Drive: Drive type: SIEMENS main spindle motor with a 2-stage oil-cooled ZF gearbox Power rating: 53 kW (S1, 100% duty cycle) Spindle speed range: Spindle speed: 20–4,000 rpm Max. torque (S1 – 100% duty cycle): 1,531 Nm Max. feed force (X, Y, and Z axes): 31,000 N Max. rapid traverse speed (X, Y, and Z axes): 25,000 mm/min STANDARD EQUIPMENT OF THE MACHINE: Heidenhain CNC controller TNC640 High-performance orthogonal milling head Automatic tool changer (80 positions) Chip conveyor with floor discharge Coolant system with 20 bar & through-spindle coolant (IKZ) Hnedoyu Sznepfx Abvjl DYNAMICS ACTIVE STABILIZER+ “DAS+ SYSTEM” Cross-axis compensation Automatic milling head changer system Operator platform Work area monitoring camera Pendulum machining package ACCURA HEADS Optimized Contour Milling (OCM) RepairFIT is our proven offer for a profitable start into our product lines. Machines available in this line are sourced by us through a strict selection process and subjected to a thorough inspection (Deep-Dive-Check). After intensive cleaning, any identified obvious defects and faults are professionally repaired by our expert service team.

Būklė: naujas, Load capacity: 30,000 kg Length: 9,000 mm Width: 2,500 mm Height: 790 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 / twin wheels Machine weight: approx. 4.2 t Space requirement: approx. 10.9 x 2.5 x 0.8 m Heavy-duty trailer featuring: - Double steering - Small turning radius - Tip-over protection due to steering lock - Extremely robust design, therefore low maintenance - Swappable drawbar, length 1,320 mm Hnodpfofrzv Nox Abvel - Impregnated wooden platform - Standard paint finish subject to change. On request, available in your preferred RAL colour. Other load capacities and dimensions available upon request. Please contact us for further information.

Būklė: naujas, Load capacity: 30,000 kg Length: 8,000 mm Width: 2,500 mm Height: 790 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 / twin configuration Machine weight: approx. 3.7 t Space requirement: approx. 9.9 x 2.5 x 0.8 m Heavy-duty trailer featuring: - Double steering - Tight turning radius - Tip-resistant due to steering angle limitation Hnjdpfxofrzv Es Abvol - Very robust, resulting in low maintenance requirements - Removable tow bar, length 1,320 mm - Impregnated wooden deck - Standard paint finish varies; custom RAL colours available on request. Other load capacities and dimensions available upon request. Please contact us.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 460 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 150 mm, darbinio aukščio: 1 030 mm, Straight-cut circular saw automatic machine MSK 471 NA Hsdsubbw Ajpfx Abvjnl for HSS and carbide-tipped saw blades Cutting range: round up to 150 mm, square up to 140 mm Suitable for almost all profile shapes and solid materials Automatic cut-off sorting via cut-off gripper Machine inspected by KALTENBACH, wear parts replaced

Būklė: naujas, Load capacity 5000 kg Length 5000 mm Width 2000 mm Height 500 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight approx. 1.0 t Required space approx. 6.3 x 2.0 x 0.5 m Heavy-duty trailer with: - Double turntable steering - Small turning radius - Tip-over protection due to steering angle limiter Hsdpfx Aefrzu Sebvenl - Robust, low maintenance - Swappable drawbar - 30 mm impregnated wooden platform top - Coupling eye diameter 40 mm - Standard paint finish changes. Available in your desired RAL colour upon request. Other load capacities and dimensions required? Please contact us. Price on request

Būklė: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 6 000 mm, Y ašies eiga: 3 200 mm, Z ašies eigos atstumas: 1 500 mm, RepairFIT by Dornhöfer The difference. Including installation and commissioning! Year of manufacture: 2018 Travel / Capacities: Longitudinal (X): 6,000 mm Vertical (Y): 3,200 mm Cross (Z): 1,500 mm Table size: Length: 6,000 mm Width: 2,500 mm Width of T-slots: 22H12 mm Distance between T-slots: 250 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) NCS S 3560 R80B (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Main drive: Hsdpsyu Swcjfx Abvenl Drive type: Water-cooled inline motor Drive power: 43 kW (100% duty cycle) Speed control: Infinitely variable via water-cooled inline motor with star/delta connection Spindle speed range: Spindle speed: 20–7,000 rpm Torque at 37 kW/S1: 900 Nm (1045/S6) Max. feed force: X, Y, and Z axes: 20,000 N Max. rapid traverse speed: X, Y, and Z axes: 35,000 mm/min Weight: approx. 44,500 kg STANDARD EQUIPMENT OF THE MACHINE: Heidenhain CNC control TNC640 Automatic milling head, diagonal (stepless) Automatic tool changer (40 stations) Chip conveyor Coolant system with 20 bar & (IKZ) Preparation for NC rotary table Confirmation for deep hole drilling RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this range are sourced through a strict selection process and undergo thorough inspection (deep-dive check) by us. After intensive cleaning, detected obvious defects and faults are professionally repaired by our expert service team.