Sunkiasvorė priekaba

WMT D15/10,0 x 2,45

Sąlyga: naujas, Gamybos metai: 2025, keliamoji galia: 2 000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2,000 kg Handheld remote control with digital display Dual foot pedal control Height approx. min. 800 mm tilted to center, max. height 1,400 mm Min. height horizontal: 1,000 mm Hnjdpfxjncfvhj Af Ieg Faceplate diameter: 1,200 mm Minimum tilt angle: 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Gamybos metai: 1985, Sąlyga: paruoštas naudoti (naudotas), Table dimensions: 1435x460 mm, number/width/spacing: 5/16/80 mm, control unit: TNCi-120, length: 1435 mm, width: 2330 mm, height: 1648 mm, weight: 3.1 t, with documentation, accessories available, no known defects, on-site inspection possible. Hnodpfslbmupex Af Ieg

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm Hnjdjhzbipopfx Af Isg - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Sąlyga: naudotas, Hidraulinės plokštinės žirklės STEINER tipas HTS 30/20 R Mašinos Nr. 315 Pagaminimo metai 1982 Pjovimo ilgis 3050 mm Pjovimo storis 20 mm Galinio atmušėjo gylis 800 mm, valdomas Variklio galingumas apie 30 kW Maitinimo įtampa 400 Voltų, 50 Hz Hnedpfx Asd Hxx Aof Isg - Galinis atmušėjas su ELGO pozicionavimo valdikliu - Galinio atmušėjo reguliavimas rutulinių varžtų pagalba - Priekyje įrengta SICK saugos šviesos užuolaida pirštų apsaugai - 3 medžiagos atraminės rankos su rutuliniais riedėjimo ritinėliais - elektrinis kojinis jungiklis - atsarginiai peiliai - alyvos aušintuvas su oro šilumokaičiu - itin tvirta, stabilios konstrukcijos mašina Pagrindinės mašinos užimama vieta (I x P x A): 4650 x 2610 x 3200 mm Pagrindinės mašinos svoris: 27000 kg Transporto užimama vieta (pagrindinė mašina) (I x P x A): 4650 x 2610 x 3200 mm Transporto užimama papildoma vieta (I x P x A): 3500 x 2450 x 1400 mm Bendras svoris: 27000 kg Gera būklė Mašina laikoma sandėlyje 37235 Hessisch Lichtenau, galima apžiūra ir bandomasis pjovimas.

Sąlyga: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Hedpfxjd Ixade Af Isng Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Sąlyga: labai geros būklės (naudotas), Multiple 150 m³ underground steel storage tanks (fire water tanks) Capacity: 150,000 litres Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground firefighting water tanks in accordance with DIN 14230: The tank is equipped with a fire water suction connection according to DIN 14244, featuring an installed firefighting coupling / permanent coupling A as per DIN 14319, version Form B, without dip tube. Additionally, the tank includes a vent flange connection (DN 100) with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground. - The tank is emptied, cleaned, and externally coated with bitumen paint by us at the factory - On request, we can provide the tank with a full internal bitumen-based lining (for corrosion protection) or an internal epoxy resin coating Cost-effective delivery with our own truck is possible. Simply provide us with the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. Hodpfx Afefnh Tgs Ieng Should you need further information, please call us or send an email to b.barth (a) barth-tank.de

Gamybos metai: 2021, Sąlyga: labai geros būklės (naudotas), Complete set incl. single and dual foot remote control Digital display for speed Hydraulic height adjustment Dimensions: Hedpfxem Ew Stj Af Ijng - Tilted height min: 800 mm - Tilted height max: 1900 mm - Horizontal height min: 1050 mm - Horizontal height max: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed from 0.01 to approx. 0.7 rpm.

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Hjdpowbh Ifjfx Af Ieng Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.

Sąlyga: geras (naudotas), Gamybos metai: 2005, X ašies eiga: 780 mm, Y ašies eiga: 560 mm, valdiklių gamintojas: Heidenhain, valdiklio modelis: Mill Plus, stalo ilgis: 700 mm, veleno greitis (maks.): 12 000 aps./min, 60 tool stations. 2-fold pallet changer. IKZ – spindle with 12,000 rpm, 40 bar. Operating mode 4 for working with the door open. Blum laser, with tool measurement and tool breakage control. Prepared for Blum 3D probe. Probe not included in scope of delivery. Hodou S A Anjpfx Af Iong

Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 5722, Table clamping surface: 190 x 710 mm Table travel X-axis: 390/360 mm Table travel Y-axis: 150 mm Table travel Z-axis: 280 mm Spindle taper: SK 40 Hsdpfoflrg Tex Af Ieng Spindle speeds: 100 - 3100 rpm Longitudinal feed: 0 - 600 mm/min Electrical connection: 380 V, approx. 1.5 kW Required space: 1400 x 1200 x 1500 mm Weight: approx. 680 kg