Suvirinimo stalas

WMT 1300 x 800 Hubtisch

Būklė: naujas, Table length: 1220 mm Table width: 760 mm Table height: 910 mm Weight: 226 kg Nitrided welding table workbench + 66 accessories included Benefit from the best of both worlds: the functionality and quality of GERD WOLFF welding tables combined with the mobility of a cart. The workbench features an interchangeable, robust tabletop that accommodates all TM fixture components with a bore diameter of approximately 1.6 cm. This allows you to create the ultimate, high-performance, compact mobile workstation. Expand your clamping and positioning options and be ready for new projects with the GERD WOLFF Welding Table Workbench + Fixture Set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for clamping and positioning during welding and fabrication. Clamp and position at any point on the reversible, double-sided, precision ground, nitrided (heat-treated) 121.92 x 76.2 cm tabletop for accurate setups every time. Technical Specifications Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Tabletop flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture Set (5/8 inch = 1.5875 cm) 2 x Inserta Clamps, suitable for 1.5875 cm holes (UDN5150) 2 x Side Clamps, suitable for 1.5875 cm holes 2 x Inserta Pliers, suitable for 1.5875 cm holes (PTT522K) Hedpfxoxqrhlo Afden 2 x Inserta Pliers, suitable for 1.5875 cm holes (PTT634K) 2 x Magnetic V-Pads for the tabletop 2 x Locating Pins, suitable for 1.5875 cm holes 2 x Angle Brackets, 1.5875 cm holes (T50305) 2 x Angle Brackets, 1.5875 cm holes (T50304) 4 x Stops, suitable for 1.5875 cm holes (T54203) 4 x Stops, suitable for 1.5875 cm holes (T54205) 4 x V-Block Spacers, suitable for 1.5875 cm holes 8 x D-Stop Bars, 1.5875 cm holes 8 x V-Blocks, suitable for 1.5875 cm holes 10 x Ball-Lock Bolts, suitable for 1.5875 cm holes 12 x Magnetic Support Pins

Būklė: naujas, Table diameter: 900 mm Table load capacity: 1.0 t Swivel range: 135 degrees Rotational speed: 0.12 - 1.2 rpm Faceplate height: 820 mm Welding current: 500 amperes Total power requirement: 0.75 + 0.55 kW Machine weight: approx. 1.1 t Space requirement: approx. 1.5 x 1.0 x 0.9 m - Self-locking gearbox: no overrun or backlash under eccentric load. - Electronic components by Schneider, Siemens, and Delta. - Infinitely variable, frequency-controlled turntable speed. - High stability due to robust construction. - Welding current transmission. - CE certificate. - Excellent price/performance ratio. Hsdpfxsfv Axxe Afdjn - The D-HBE series is supplied as standard with cable remote control and foot switch.

Būklė: naujas, Table length 2400 mm Table width 1200 mm Load capacity 4000 kg Lifting height 510 - 1550 mm Total connected load 1.5 kW Connection voltage 400 V Machine weight approx. 0.95 t Hedpfx Afewz Rubsdon Welding table on lift table: Hole diameter: 28 mm The table is made of 15 mm thick S355 steel The surface is pickled and oiled. Tolerance: Top +/- 1 mm and on the sides +/- 1 degree. Side panels 150 x 10 mm Underside ribbed for reinforcement.

Būklė: naujas, Gamybos metai: 2024, veleno skersmuo: 80 mm, Profile bending machine AHB 100 - with universal rolls - three-roll drive - digital display for left and right bending axes - hydraulic side straighteners - hydraulic drive of the bending rolls - operation possible both vertically and horizontally - manufactured according to CE standards - bending capacity flat bar max. 12x200 mm - flat bent 200 x 40 mm - U-profile (internal and external) 180 mm - angle profile, leg outside 100x100 mm Hsdpovaw Elefx Afdsn - angle profile, leg inside 90x90 mm - solid material round 75 mm - INP 140 - shaft diameter 100 mm - roll diameter 315 mm - bending speed 5 m/min - motor power 11 kW - weight 2,600 kg - max module Wcm³ - 400 volts, 50 Hz, 3-phase - 1950 x 1600 x 2100 mm

Būklė: beveik kaip naujas (naudotas), Rostfritt stålpalllyft, Gaffelmått: (2x) 1150 mm x 160 mm Hsdjhlp Nfopfx Afdsn Totalmått: 1600 mm x 530 mm x 1220 mm

Gamybos metai: 2026, būklė: naujas, Technical data: - Rated output: 700 L/cycle (at a filling temperature of 80°C) - Power requirement: 1 kW, 230 V, 6 A, single-phase - Boiler capacity: 80 kW - Heat source: oil - Oil consumption: 7.5 L/h - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 750 x 1700 x 1170 mm - Weight: 380 kg - Heat exchanger: soft water - IP65 electronics - Connection: DN 65 - Automatic temperature control - Easy to clean using sponge balls - Minimal maintenance required Hedpfxefhb Ito Afdon Optional: BB top 180 semi-automatic Bag in Box filling system + 6-station bottle filling system with buffer tank

Būklė: naujas, Gamybos metai: 2026, keliamoji galia: 3 000 kg, Aukščiausia kokybė iš aukštos atsparumo konstrukcinio plieno Q355, įskaitant plazminį nitridavimą ir skalę 3D skylėtas stalas 2400 x 1200 x 200 mm, tinklelis 100 mm, plokštės storis 20 mm, skylės skersmuo 28 mm, Obliuotas paviršius, labai masyvus, svoris apie 950 kg Hsdpfxsx Nih Ns Afdjn Su stalviršio kojomis, 4 kartus reguliuojamas Kaina be priedų rinkinio, papildomai 500 € Supakuota į medinę dėžę, siuntimas pagal užklausą

Būklė: nepatikrintas (naudotas), Gerbiami ponai ir ponios, Hodpfewktwkjx Afden siūlome įsigyti šį įrenginį: Keyence Agilista 3200W 3D spausdintuvas. Įranga parduodama su komplektacija, kuri užfiksuota nuotraukose ir išsamiai nurodyta skelbimo tekste. Vieta: 40764 Langenfeld DĖMESIO! Prietaisas yra iš bankroto.

Būklė: naujas, Table length: 1300 mm Table width: 800 mm Lifting height: 1015 mm Load capacity: 3000 kg Minimum lifting height: 220 mm Connection voltage: 400 V Total power requirement: 1.5 kW Machine weight approx. 0.32 t Space requirements approx. 1.3 x 0.8 x 0.23 m The hydraulic lift tables are electrically powered and operated. Equipped with a contact strip for safe lowering operation. Hjdovn Uzmopfx Afdjn Highly versatile applications for workshops, assembly departments, loading bays, etc.

Būklė: naudotas, 2 Ultra-Niedrigprofil Paletten-Hubtische Modell HY1501 Hedpfx Afsh Rkmwsdsn Tragfähigkeit: 1500 kg Spannung: 240 Volt Plattformmaße: 1600 mm x 800 mm Niedriges Profil: 100 mm Bodenfreiheit Sicherheitsleisten Rampe inklusive Elektrohydraulische Antriebseinheit Bedienpult In exzellentem Zustand