Sandėlio keltuvas

Weland Solutions Compact Lift 2440

Gamybos metai: 1987, būklė: naudotas, Sheet width 150 mm Coil weight 80 kg Coil outside diameter 650 mm Mandrel height 1000 mm Expansion range 230 - 445 mm Total power requirement kW Machine weight approx. t Nodpfx Ajfn Aqljbzolc Space requirement approx. m motorised decoiler

Gamybos metai: 1979, būklė: naudotas, Press force 160 t Clearance between columns 850 mm Stroke 400 mm Ram area 800x700 mm Ejector stroke 300 mm Ejector force 20 t Table area 800x700 mm Total power requirement kW Njdpfx Ajlp Uz Rsbzolc Machine weight approx. 12 t Space requirement approx. 1800x1800x4200 mm Sick BWS for safety and cycle operation Blow-off Ejector Mechanical fixed stop Stroke-pressure cut-off Pressure dwell time Approved for manual loading/unloading operations

Gamybos metai: 2016, būklė: paruoštas naudoti (naudotas), The Coiltech Decoiler Straightener Feeder System is a compact feed line for presses. Strip width: 600 mm, material thickness: up to 6.5 mm, straightening rolls: 7 x 115 mm, decoiler load capacity: 6,000 kg, inner diameter (min-max): 470–520 mm. Connected load: 7.5 kW; supplied with documentation. Nljdpfxei El Uco Abzoc

Gamybos metai: 2017, veikimo valandos: 30 h, būklė: beveik kaip naujas (parodų įrenginys), Maximum strip thickness: 4 mm Strip width: 300 mm Repeat accuracy: +/- 0.05 mm NC drive with compact controller Feed force: 3,000 N (300 kg) Maximum strip pressure: 1.2 t Nsdob Nbglspfx Abzjlc

Būklė: naudotas, Material width: 250 mm Material thickness: 2 - 4 mm Nljdsgbl Aaspfx Abzjc Number of straightening rollers: 7 Infeed height: 1250 mm Strip feed adjustable, positive: 25° Strip feed adjustable, negative: 30° Total power requirement: 3 kW Machine weight: approx. 800 kg Space requirement: approx. ... m The straightening machine has been disassembled, inspected, and subsequently repainted.

Būklė: naudotas, Gamybos metai: 1996, mašinos/transporto priemonės numeris: 90.293/1, Material width: 75 mm Total power requirement: 1.5 kW Space required approx.: 1.90 x 1.15 x 1.25 m Nedpfx Abecxxpnezelc

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 250 t, stalo plotis: 1 200 mm, stalo ilgis: 2 000 mm, bendras svoris: 55 000 kg, Sertifikuota DGUV iki: 09/2026, hidraulinio cilindro reguliavimas: 150 mm, eigos reguliavimas: 40 200 mm, Raster išmušimo ir formavimo automatas RSU 2500 - 2000 P Desch kompaktiškas pavara Elektroninė presavimo jėgos matavimo sistema Hidraulinė perkrovos apsauga Trijų dalių traukos strypų liejinio konstrukcija Įrankių laikiklis Nsdpfxsxcbbrs Abzolc Stalo ir grūstuvo spaustuvai Raster VWA hidraulinis valcavimo padavimas, juostos plotis 500 mm, su Topochrom volų danga Grūstuvo paviršius 1000 x 2000 mm Eigos dažnis: 20 - 150 1/min Eigos reguliavimas: 40 - 200 mm Raziol segmento volų tepimo įtaisas Pageidaujant su Kohler juostų sistema 20030.400/9-2000.2H

Būklė: naudotas, Double-Column Hydraulic Press NEFF Type RHS 125 Z Hydraulic Deep Drawing Press Machine No. 3973 Year of manufacture: 1983 Pressing force: 125 tons Column width: 1050 mm Lateral column clearance: 550 mm Table surface: 1000 x 800 mm Ram surface: 1000 x 800 mm Ram stroke: 350 mm Maximum installation height: 750 mm Table height above floor: 960 mm Drawing cushion force: approx. 12 tons at 105 bar Drawing cushion stroke: 100 mm Table opening diameter: 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid return speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1000 liters Main pump motor output: 22 kW Control pump motor output: 4 kW Control pump motor output: 2.2 kW Power supply: 400 Volt, 50 Hz - Hydraulic drawing cushion under the table with borehole through the tabletop, Ø 202 mm - Precise four-column guiding system at the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable limit stop via hydraulic motor - Shearing impact damping system - Two-hand control panel for stroke activation at the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating manual, electrical circuit diagram, and PLC program printout available Space requirements of the press (L x W x H): 2600 x 2400 x 4270 mm Weight: approx. 14 tons In good condition Nljdpfx Absguvtlozec

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, PERO naudota detalių plovimo mašina Nljdpfx Aoyb St Robzjc

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Pressing Force: 2,000 kN Table Area: 2,300 x 1,100 mm (W x D) Pass-through Opening: 2 pcs., 700 x 300 mm Distance Between Columns: 2,460 mm Ram Clamping Surface: 2,300 x 1,100 mm Lateral Passage: 740 mm Installation Height: 550 mm (stroke down, adjustment up) Stroke Rate: 30 – 140 strokes/min, infinitely variable Stroke: 20...220 mm Ram Adjustment: 150 mm (motorized) Main Drive: 30 kW Weight: approx. 27,500 kg Version/Features: • Siemens + Beckhoff controls • 8-way slide guides • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromotive stroke adjustment • Siemens + Beckhoff controls • Visualization via Beckhoff panel • T-slots in table and ram (28 mm, 300 mm spacing) • Vibration-damping machine feet • 4 tool locks and 4 cam outputs • Ram with 20 mm central slot • Hydraulic die clamps on table and ram • Hydraulic rollblocks for tool change Strip Feeding Line by Kemmerich, consisting of: Uncoiler Type: V 5000 A – SH – 600 – S Load Capacity: 5,000 kg Strip Width: 100 – 600 mm Expansion Range: 470 – 520 mm Coil Outside Diameter: 2,000 mm • Auxiliary motor drive • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Rear end plate and 3 plug-in side arms at the front • Hydraulic hold-down roller, motor-driven, laterally adjustable via handwheel • Coil car (stationary, uncoiler moves hydraulically), lifting height 770 mm with 4 limiting rods Straightening Machine Type: RMBMZ 50.600 UF Strip Width: 40 – 600 mm Strip Thickness: 0.5 – 4.0 mm Straightenable Cross-section: 1,200 mm² Number of Rolls: 9 pcs. Roll Diameter: 50 mm Number of Feed Rolls: 2 pcs. Feed Roll Diameter: 100 mm Speed: 3 – 25 m/min Features: Nledpov T Anlofx Abzoc • Rolls hardened, ground, and hard-chrome plated • Drive for lower straightening rolls and feed rolls via gear drive • Motorized roll stand adjustment via motors, adjustment accuracy 1/100 mm, values can be saved • Upper rolls can be opened by 100 mm • Feed rolls pneumatically releasable • Lateral strip guide at infeed with handwheel and leadscrew • Outfeed roller basket and loop bridge • Loop control by ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roll Roll Feed Strip Width: max. 600 mm Features: • Rolls hardened, ground, and chrome plated • Driven by gearmotor • Upper roll pneumatically releasable • Height adjustment hydraulic • Lateral strip guide at infeed with handwheel • Roller basket Additional Features: • Pneumatically pivoting loop bridge between straightener and feed • Safety fence around complete system • Uncoiler and straightener on common base frame • Various spare rolls for the straightener The complete system can still be inspected under power at the seller’s site!