Ciklo valdomas tekinimo staklės

WEILER E30x750

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 8 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 750 mm, tekėjimo skersmuo: 330 mm, veleno skylė: 41 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 aps./min, ašies variklio galia: 11 000 W, quill skersmuo: 50 mm, plunksnos brūkšnys: 110 mm, tekinimo skersmuo virš slankiojančio stalo: 435 mm, bendras svoris: 1 400 kg, centro aukštis: 165 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, WEILER E30X750 Lathe (Year 2007) with Siemens Control – Immediately Available For sale is a WEILER E30x750 lathe from 2007 in very good, well-maintained, and fully operational condition. The machine has been used reliably and is ready for immediate use. Viewing by appointment is possible in Graz, either on-site or via video call. Additional photos and videos of the machine in operation can be provided upon request. Key Facts Manufacturer/Model: WEILER E30x750 Year of Manufacture: 2007 Control System: Siemens 810 D Condition: Fully functional, ready for immediate use Location: Graz Viewing: On-site or via video call by arrangement Power-On Hours (machine under power): 26,492 h (Actual operating hours are significantly lower! Typically, spindle running time (actual turning) is only about 30% to 50% of this value, i.e. approx. 8,000 to 13,000 hours.) Electrical Connection: 400 V Technical Data: Working Area Centre height: 165 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Centre distance: 750 mm Spindle Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 41 mm Spindle diameter at front bearing: 70 mm Max. torque at spindle: 180 Nm Main Drive Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: Infinitely variable Feed / Rapid Traverse Ncjdpfovphv Tox Agisn Feed drive: Three-phase AC feed drives Feed range (infinitely variable): longitudinal: 0.001–50 mm/rev (Note: additionally specified 0–20 mm/rev) cross: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N cross: 3,000 N Max. rapid traverse rate longitudinal/cross: 8 / 4 m/min (Note: additionally specified 10 / 7.5 / 5 / 3.5 m/min) Thread Cutting Range Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 tpi Tailstock / Quill Quill diameter: 50 mm Quill travel: 110 mm Internal taper DIN 228: MT 3 Accuracy Acceptance accuracy: DIN 8605 Dimensions / Weight Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Note: The original purchase price was €97,000. Interested? Please contact us for further information or to arrange a viewing appointment. Additional photos and videos of the machine in operation are available upon request.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3806, šlifavimo ilgis: 600 mm, šlifavimo plotis: 250 mm, šlifavimo disko skersmuo: 250 mm, šlifavimo veleno greitis: 3 000 aps./min, galia: 3,5 kW (4,76 AG), Įranga: sūkių greitis be galo kintamas, JUNG JF520 – workshop-refurbished Mechanically and electrically inspected and function-tested by our JUNG specialists Wearing parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm Ncedpfx Aswz Hf Nogijn - Stepper motor infeed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short-term We are happy to accept your used JUNG grinding machine as trade-in.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, INDEX C200, pagaminta 2021 m. Valdymas: Siemens Solution Line. 3 revolverinės galvos. 2 velenai. D=90 mm. IRCO VDI 30. Su priklausančiais įrankiais, parodytais nuotraukoje. Trumpas strypų padavėjas su žurnalu. Įrenginys yra Europoje. Ncodpsx Av Dbsfx Agijn

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant VC Plus Precision Lead and Feed Screw Lathe with 3-Axis Digital Readout, Infinitely Variable Speed, Excellent Condition Technical Data: >> Year of manufacture: 2014 Machine No. JD12 >> Center height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centers: 650 mm >> Spindle speeds from 30 to 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet lock >> Tailstock taper: MK 3 >> Infinitely variable feed adjustment during operation via potentiometer (override) >> Input for feeds and thread pitches >> Longitudinal feeds from 0.1 to 6 mm/rev >> Cross feeds from 0.003 to 2 mm/rev >> Threading options: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.1 to 20 mm >> Weight approx. 1400 kg >> Spindle brake >> Dimensions: approx. 1.72 m (L), 1.7 m (H), 0.89 m (D) Accessories and Equipment: >> Weiler digital readout Nodeydczdspfx Agijcn >> Collet chuck system NEW, collets NEW from 3 to 26 mm >> 3-jaw chuck 160 mm with 1 set of jaws >> 4-jaw chuck 160 mm with 2 sets of jaws >> Multifix size B with 3 toolholders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts diagram For Safety: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of respective handwheel when feed is engaged VCplus Digital Readout: >> 8-inch color display >> 3 axes: bed, cross slide, compound slide >> 99 tool memory >> Oriented spindle stop >> Input of constant speed or cutting speed >> Feeds and thread settings displayed >> Thread cutting with electronic limit stop About the Machine: This offer is for a Weiler Praktikant VC Plus precision lead and feed screw lathe with 3-axis digital readout. Year of manufacture: 2014, in very good condition with original paint. The machine is fully functional and comes equipped with new collets and chucks. You are welcome to inspect the machine under power at our facility and verify its condition.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Li-Ion Ready, Gamybos metai: 2022, veikimo valandos: 160 h, keliamoji galia: 5 000 kg, kėlimo aukštis: 4 425 mm, laisvas kėlimas: 1 375 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 225 mm, šakių ilgis: 1 200 mm, tuščias svoris: 7 643 kg, bendras ilgis: 2 600 mm, pavaros tipas: Elektro, statybos plotis: 1 400 mm, Electric 4-wheel forklift Chassis number: Li-Ion Ready Load center: 500 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: As new Technical condition: Very good Front tires type: Non-marking Front tires size: 355/50-15 Front tires condition: 80 - 100% Nedpfxsu Txl Ie Agiecn Rear tires type: Non-marking Rear tires size: 21x8-9 Rear tires condition: 80 - 100% Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: Still Battery type: PzS Battery year: 2022 Battery condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, full cabin,

Gamybos metai: 2003, Sąlyga: geras (naudotas), Travels: 560 x 410 x 510 mm, table: 900 x 410 mm, 30-tool magazine, spindle: 12,000 rpm, chip conveyor. Ncedpfjiwkhkex Agion

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, veikimo valandos: 11 500 h, mašinos/transporto priemonės numeris: 3098, lazero valandos: 6 900 h, lazerio galia: 10 000 W, maks. lakšto storis: 30 mm, plieno lakšto storis (maks.): 30 mm, galia: 10 kW (13,60 AG), paskutinio kapitalinio remonto metai: 2024, darbo diapazonas: 4 020 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, dokumentacija / vadovas, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series featuring the following specifications: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • High-performance Donaldson DFPRO 6 filter system with 7.5 kW Technical Data: Model: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Laser cutting head: EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical Data (Drilling Unit): Drilling capacity: Ø 4 mm - Ø 30 mm Thread cutting: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic measurement of drilling tools Pneumatic hold-down device Brush for removing drilling chips Donaldson® Filter System DFPRO 6 Cyclopeel Fan output: 7.5 kW Nsdjvw Tdljpfx Agiocn Airflow: 4,500 m³/h Asper Nesting® | Automatic nesting software Includes Witt gas mixer The machine was always operated with a maintenance and support contract.

Sąlyga: naudotas, Gamybos metai: 2013, Technical details: X-axis travel: 760 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Control: Heidenhain TNC 620 Power-on hours: 20,246 h Spindle operating hours: 7,724 h Spindle speed: 12,000 rpm Spindle torque: 75 - 95 Nm Spindle taper: SK40 Tool magazine with: 24 slots Table size: 900 x 410 mm Max. table load: 350 kg Feed rate range: n/a Rapid traverse: 36 m/min Interface: RS232 Control voltage: 24 DC V Compressed air connection: 6 / 8 bar Nsdpfsvhbpdjx Agiscn Total power requirement: 20 kVA Machine weight approx.: 6.0 t Cooling unit dimensions: 1.7 x 0.7 x 1.35 m Machine dimensions (LxWxH) approx.: 1.9 x 2.3 x 2.45 m TNC620 (contouring control with up to 5 controlled axes, especially suitable for universal milling), can be integrated into a network Safety doors with impact-resistant plastic windows Chip conveyor Hydraulic unit Coolant treatment system Rittal cooling system on the control cabinet Work area interior lighting Hand control device

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3595, Dear Sir or Madam, Njdpfx Agsthd Sheiscn For sale is a Weiler Commodor B lathe from year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings as well as the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible threads: Metric, Imperial, Module, Diametral-Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, removable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can carry out a complete or partial overhaul of the selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further accessories, such as safety equipment - We are happy to take care of shipping and/or installation

Sąlyga: naudotas, Gamybos metai: 2007, Turning diameter 300 mm Swing diameter over bed 430 mm Swing diameter over saddle 300 mm Control SIEMENS, SINUMERIK 840 D Travel - X axis 160 mm Travel - Z axis 510 mm Max. part length 480 mm Main spindle bore 53 mm Main spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Main spindle motor 15 kW Sub-spindle bore 53 mm Sub-spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Sub-spindle motor 15 kW C-axis resolution 0.001° C-axis rapid traverse 1000 rpm Tool turret 1 x 12 positions Number of driven tool stations 12 Toolholder shank (DIN 69880) VDI 25 Ncjdpowx R Rkofx Agijn Driven tool speed 0 - 8000 rpm Torque 16 Nm Power 4 kW Feed force X/Z axis 4000 / 6000 N Rapid traverse X axis 24 m/min Rapid traverse Z axis 30 m/min Total connected load 38 kVA Machine weight approx. 4 t Machine dimensions (L x W x H) 2.65 x 1.84 x 2.32 m Accessories: Collet chuck 173 E on main spindle, collet chuck 163 E on sub-spindle, bar feeder FMB, type turbo 3-36/3200 A, year 2018, for bar diameters up to 36 mm and bar lengths up to 3200 mm; various tool holders for turret (none driven), coolant system.