Centras tekinys

Weiler Commodor Geometrisch Überholt

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, COMPLETELY REFURBISHED, including Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No. 2268-87 >> Center Height: 180 mm >> Center Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose, DIN 55029 Camlock >> Tailstock: MT 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threading: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1,500 kg >> Spindle Brake, selectable >> Motor Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Accessories and Equipment: >> 3-Axis Digital Readout K&C, new, 12 months manufacturer warranty with manual >> NEW 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix tool post, size B with 3 new tool holders Rjdpfx Aaoymznhs Decd >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp Safety features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers available on request. About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The slideways have been reground or hand-scraped as new. Complete with acceptance according to inspection protocol. Finished in 2K high-gloss white paint. The Multifix tool post and the chuck are new. Safety features include a brake motor, electronic spindle guard, and two emergency stops. This is an absolutely as-new lathe. The Weiler runs very smoothly even at high speeds. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Būklė: naujas, Gamybos metai: 2026, Drilling and Milling Automation Unit Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling automation unit with mobile machining head – the table remains stationary, the drilling head moves. The system can be operated both manually and fully automatically. After each drilling operation, the machining head automatically moves in the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine controller can be carried out using DXF/DWG file formats via a programming station. Alternatively, programming can also be done directly at the machine controller. The system is highly robust and assembled from proven machine components. Technical Specifications: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base • Spindle speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • Drive for X, Y, and Z axes via servo motors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top to bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St-50 (depending on tool) • Thread tapping: M4 - M30 (with floating chuck) • Y-axis travel: 300 mm • Tolerance in X-axis: ±0.1 mm • Tolerance in Y-axis: 0.06 mm • Tolerance in Z-axis: 0.06 mm • Spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Front safety with light barrier • Rear access protection with safety fence • Control: 21.5" touch-screen panel, reinforced front glass • Simple on-machine programming • Milling of elongated holes and circles • Lubrication via minimum quantity spray system • Without material clamping devices • Remote maintenance via TeamViewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Workflow simulation • Digital handwheel Your Benefits: • Workpiece surfaces remain protected • Clear, graphical user interface • Machining at the end of the workpiece is easy • 50% space saving compared to moving-table operations • Chips are collected in chip tray • Easiest programming and operation Redpfx Aaofu Ivzo Djcd • Minimum quantity spray system (standard) • Programming errors eliminated via CAD/CAM You are welcome to visit our manufacturing/demo hall to inspect the desired system at any time. Please feel free to contact us for an appointment. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Display, NEWLY Refurbished with Inspection Report for New Machine Tolerances Technical Specifications: >> Machine No. 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread cutting possible: Metric, Inch, Module and Diametral Pitch >> Metric Thread Pitch: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake switchable >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis K&C Digital Readout, new, 12 months manufacturer's warranty with user manual Functions: mm/inch selection, coordinate choice ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 200 mm wedge-bar 3-jaw chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant device >> LED machine lamp For safety the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been newly ground and scraped. Delivery includes an acceptance report according to inspection protocol. Coated with high-gloss 2K white paint. The Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs extremely smoothly. This latest generation of Weiler lathes is especially user-friendly and allows the production of ground-like finishes. You are welcome to inspect the machine under power on site to convince yourself of its condition. Rjdpfxsvrckqj Aa Dscd

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEWLY Refurbished with Acceptance Protocol for New Machine Tolerances Technical Data: – Machine No. 1824 – Center Height: 180 mm – Center Distance: 1000 mm – Spindle Speeds: 13 to 2000 rpm – Spindle Bore: 56 mm – Short Taper Spindle Nose DIN 55029 Size 5 – Tailstock Morse Taper: MK 4 – Feeds: 0.026 to 0.888 mm/rev – Thread Types: Metric, Inch, Module, and Diametral Pitch – Metric Thread Pitches: 0.35 to 12 mm – Weight: approx. 1500 kg – Spindle Brake, switchable – Drive Power: 2.0/4.0 kW – Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: – 3-Axis Digital Readout by K&C, new, 12 months manufacturer’s warranty with operating manual Features: Switching mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching – 200 mm three-jaw chuck, wedge bar type, like new, 1 set of jaws – Multifix size B with 2 tool holders, NEW – Bed stop – Machine feet – Coolant system – LED machine lamp For added safety, the machine is equipped with: – Electronic spindle guard – Spindle brake – 2 emergency stop switches On request: Covers for the lead and feed screw About the machine: This listing is for a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been reground and hand scraped. Acceptance inspection per test report. Painted in high-gloss 2K white. Accessories such as Multifix and chuck are new. For safety, the machine features a brake motor, electronic spindle guard, and two emergency stop switches—an absolutely as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely operator-friendly, allowing surfaces to be produced as finely as ground. Take the opportunity to inspect this machine under power on site and convince yourself of its condition. Rsdpsvrcqdefx Aa Docd

Būklė: naudotas, Gamybos metai: 2001, Universali kreipiamoji ir traukos sraigtinė tekinimo staklė Gamintojas: GDW Modelis: LZ 360 S Pagaminimo metai: 2001 – patikrinta dirbtuvėse Mašinos nr.: 1104 071 Geometrinis patikrinimas su bandymo protokolu Centro aukštis: 175 mm Centro atstumas: 800 mm Priedai: - 3 ašių skaitmeninė indikacija FAGOR NVP 300 TS-RS su galimybe perjungti į pastovų pjovimo greitį - Perėjimo rinkinys nustatyti gręžimo staklės atramą nuo rankenėlės prie sverto valdymo - Griebtuvo apsaugos gaubtas su elektriniu apsaugos jungikliu Rcodpfx Asy H Di Nja Ded - Variklis su stabdžiu - Dvigubas avarinio stabdymo jungiklis (kairėje ir dešinėje) - Greito keitimo įrankių laikiklio pagrindinis korpusas, dydis B - Staklių lovos ribotuvas - Drožlių galinė siena - Ištraukiama drožlių dėžė - Aušinimo skysčio įranga - 2 vnt. centrinių grąžtų MK 3/60° - Saugos suktuvo plokštelė - Valdymo raktas - CE atitikties deklaracija - CE dokumentacija (naudojimo instrukcija) Naudota, be garantijos Mašina techniškai atitinka gamybos metų lygį.

Gamybos metai: 2018, būklė: paruoštas naudoti (naudotas), A DMT lathe is available. Centre distance: 1000 mm, swing diameter over bed/cross slide: 420 mm/210 mm, bed height: 340 mm, spindle bore: 64 mm, spindle diameter: 115 mm, speed: 4,000 rpm, quill diameter: 60 mm, quill stroke: 140 mm, cross slide width: 210 mm, cross slide length: 640 mm. Machine dimensions X/Y/Z: approx. 2,150 mm/1,150 mm/1,700 mm, weight: approx. 1,800 kg, control: Heidenhain, operating hours: approx. 300 h. Documentation is available. An on-site inspection is possible. Rjdpfx Aaewtg H Rs Docd

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 570 mm, veleno skylė: 62 mm, tekėjimo ilgis: 1 250 mm, tekinimo skersmuo virš slankiojančio stalo: 365 mm, centro aukštis: 280 mm, bendras svoris: 4 000 kg, O F F E R We are able to offer you, subject to prior sale and errors excepted, from stock and without obligation: V D F - BOEHRINGER CNC Cycle-Controlled Universal Lathe Type: DUS 560 Year of manufacture: 1998 / completely overhauled in 2008 _____ Centre height: 280 mm Max. swing diameter over bed: 570 mm Max. swing diameter over cross slide: 365 mm Travel of faceplate slide / top slide: 345/125 mm Rcjdsyqw Eqopfx Aa Ded Distance between centres / max. turning length: 1,250 mm Spindle bore: 62 mm Spindle speeds, 2-stage, infinitely variable: 3-500/15–2,500 rpm Longitudinal and cross feeds, infinitely variable: 0.01–50 mm/rev Rapid traverse longitudinal/cross: 5 / 10 m/min Max. feed force cross/longitudinal: 6.5 / 12.5 kN Max. workpiece weight cantilevered/with tailstock: 400/1,000 kg Thread pitches: 0.1 – 400 mm/pitch Spindle drive: 15/21 kW Total drive: 25 kW - 400 V - 50 Hz Weight approx.: 4,000 kg Accessories / Special Equipment • SIEMENS 2-axis cycle control, Type 805, with direct input of all turning parameters using interactive user interfaces and appropriate software, control and monitor built into the sliding door, with memory expansion and software for free contouring, graphics, etc. • 2 electronic handwheels for fine adjustment of slide movement in Z and X axes and new joystick for rapid traverse in +Z/-Z and +X/-X, Joystick for main spindle with infinitely variable speeds forward and reverse • Fitted 3-jaw chuck Model SCA Ø 300 mm, faceplate approx. Ø 500, 4-jaw chuck Ø 315 mm, drive dog plate approx. Ø 250 mm, simple faceplate 500 mm, various jaws • Fitted MULTIFIX toolpost Type CD with 5 assorted Multifix holders • Separate toolpost block for mounting CAPTO toolholders with internal coolant supply, various holders, partly with collets • Tailstock with air bearing for smooth movement, work lamp • Mobile chip trolley with coolant pump and oil skimmer, 2 rear sliding doors, • Separate control cabinet, adjustable spindle end-stop, worklight, etc. Condition: very good – guides very good, demonstration under power possible Please click here for a video of the machine: Delivery: ex-stock – as inspected Payment: strictly net in advance prior to delivery We look forward to your order. We have more lathes in all sizes available from stock – please enquire.

Būklė: naudotas, Gamybos metai: 2000, naudotas CONDOR AC, dalinai atnaujintas Centru aukštis: 165 mm Atstumas tarp centrų: 750 mm Veleno skylė: 40 mm Veleno apsukos: 22–2 800 aps./min. be pakopų - Greito keitimo plieno laikiklis Gr. B - WEILER DZ-V skaitmeninis indikatorius - Tuščiaviduris veleno ribotuvas - Stacionari luneta - 7 vnt. Multifix laikiklių - Plokščia apsauginė siena - Elektriškai apsaugotas griebtuvų apsaugas - Kintami ratai ir įvairūs spaustuvai Staklės dalinai restauruotos: Rcjdpex E Um Nefx Aa Ded - Pagrindinis vežimėlis: vedimo kreiptuvės naujai padengtos ir nuskustos, pleištinės juostos ir apatinės spaudimo juostos pritaikytos - Skersinis vežimėlis išmatuotas ir sureguliuotas ant pagrindinio vežimėlio; skersinio vežimėlio kregždutės formos vedimo kreiptuvė naujai nuskusta, pleištinės juostos pritaikytos ir nuskustos - Viršutinis vežimėlis naujai nuskustas ir pleištinė juosta suderinta - Visi matavimo liniuotės atnaujintos ir laidai pakeisti Staklės yra mūsų ekspozicijos salėje, 71334 Waiblingen-Beinstein, ir yra iš karto prieinamos. Dėl įrangos susisiekite su mumis.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, veleno greitis (maks.): 3 300 aps./min, ašies variklio galia: 30 000 W, bendras svoris: 9 100 kg, valdiklių gamintojas: MAZATROL, valdiklio modelis: Mazatrol Matrix, ašių skaičius: 3, Šis 3 ašių "Mazak QT Nexus 350 II M" buvo pagamintas 2008 m. Jame sumontuotas "Mazatrol Matrix" valdymo blokas, maksimalus posvyris virš lovio Ø 830 mm, o tekinimo ilgis - 1500 mm. Suklys sukasi iki 3300 aps/min greičiu, o jo galia - 30 kW. Jame yra drožlių transporteris ir įrankių išankstinis nustatymas. Jei ieškote aukštos kokybės tekinimo galimybių, apsvarstykite mūsų parduodamas "Mazak QT Nexus 350 II M" stakles. Susisiekite su mumis ir gaukite daugiau informacijos. Papildoma įranga • Drožlių konvejeris • Įrankių išankstinis nustatymas • Automatinio blokavimo griebtuvas • Įrankių laikikliai • Naudotojo ir priežiūros vadovai Mašinos privalumai Techninės mašinos privalumai • Maks. Tekinimo skersmuo: Ø 420 mm • Maks. Tekinimo ilgis: 1500 mm • Strypo skersmuo: 102 mm • Veleno nosis: asa 11” Rcedpfx Aex D I Risa Dsd • Griebtuvo tipas: automatinis griebtuvas Ø 315 mm • Įrankio dydis: 25 × 25 mm / Ø 50 mm • Varomojo įrankio variklio galia: 7,5 kw • Maks. Varomųjų įrankių greitis: 4000 aps. /min. Papildoma informacija Mašina vis dar įjungta

Gamybos metai: 1988, būklė: paruoštas naudoti (naudotas), Travel X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10,000 rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11,000kg. Redpfx Aetpp H Nja Docd