Cilindrinio šlifavimo staklės

Wagner YAM GU2760 II

Būklė: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Kledpfstycg Sox Am Tst Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Stroke rate 355 – 630 strokes/min Feed range 0.008 – 0.4 mm/stroke Required space approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg With rack cutting attachment Change gear set Year of manufacture: approx. 1981

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Machining center Brand: KNUTH Model: EcoMill 350 CNC Kodpfxjtiauhj Am Tjlt

Būklė: naudotas, Gamybos metai: 1977, Grinding diameter: 350 mm Grinding length: 1,000 mm Kedpfx Ajynmpgem Tjlt Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speeds: 1,500 / 1,700 / 2,200 rpm Infeed incrementally: 0.001–0.030 mm/Ø Infeed continuously: 0–0.95 mm/Ø Table swivel: ±8° Table longitudinal travel: 1,300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 × 2.0 m Originally supplied new to university. Taken over in 2018. Then fully serviced at BEMA and delivered to a single-operator workshop. The machine will now be serviced again and the table geometry remachined. 2-axis Fagor digital readout retrofitted. – Tailstock with fine adjustment – Internal grinding device – Coolant system Additional accessories available on request.

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 163341, Country of origin: UK Voltage: 400V 3-phase AC 50/60Hz max 58A Dimensions: 200 x 260 x 250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Capacities Table dimensions: length 900 mm / depth 410 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 510 mm Distance spindle nose to table surface: min 150 mm, max 660 mm Distance spindle center to column: 540 mm Maximum table load: 500 kg Klodpfx Aew T Tp Rom Tjt Spindle Speed: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power: 7.5 kW Feed rates Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900 x 410 mm T-slot size (ISO R299): 18 mm / Number: 3 / Spacing: 125 mm Permissible load: 500 kg Distance floor to tabletop: 780 mm ATC Tool Magazine Number of tools: 30 pcs Tool selection: random access; automatic bi-directional search Tool holder: MAS BT-40 Max tool diameter in magazine: Ø 80 mm (without adjacent tool: Ø 125 mm) Max tool weight: 8 kg Maximum magazine load: 120 kg Max tool length: 350 mm Tool change time: 2.9 sec (chip-to-chip) Lubricant reservoir: 1.8 L Axis lubrication reservoir: 260 cm³ Spindle coolant tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant reservoir: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min All technical data is supplied subject to possible error or omission and is provided without guarantee.

Būklė: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Maximum Plunge Depth: 1.7 mm Klodovca Izepfx Am Tet Grinding Spindle Headstock Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Taper Mount: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No liability is accepted for the correctness, completeness or accuracy of the information provided.

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Klsdpfet Hww Dex Am Tjt Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: geras (naudotas), Gamybos metai: 1975, Ratų skersmuo - maks. 630 mm y eiga 560 mm Ratų plotis 180 mm Modulis - maks. 8 Modulis - min. 1 Rušinys diametras 750 mm Stalo skersmuo 450 mm Tvirtinimo ašies skersmuo 58 mm Špindelio eiga 200 mm Reguliavimo diapazonas 230 mm Atstumas tarp špindelio ir stalo 225–450 mm Tvirtinimo kūgis Morse 4 Giluminis padavimas 0,03 mm/eiga Pjovimo padavimas 10n: 0,18–0,74 mm/eiga Eigos dažnis 12n: 47–300 eiga/min Kjdpsyb Sx Tefx Am Tolt Elektrinė versija – Įtampa/Dažnis 380/50 V/Hz Mašinos svoris apyt. 5500 kg Mašina buvo pakelta 100 mm.

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 650 mm, padavimo eiga Y ašimi: 400 mm, padavimo ilgis Z ašis: 230 mm, veleno greitis (maks.): 3 000 aps./min, For sale is a surface grinding machine, brand Okamoto, model PSG 52 UDX. The machine is well-maintained and ready for immediate use. Technical data: Year of manufacture: 1989 Grinding area: - X-axis: 650 mm (manual) - Z-axis: 230 mm - Y-axis: 47 mm – 400 mm Max. vertical travel (lower edge of a new wheel, with ⌀ 205 mm): min./max. – table Grinding wheel diameter: max. ⌀ 225 mm Spindle speed range: 3000 rpm (stepless speed regulation) Table feed: 0.3 – 25 m/min (hydraulic, X-axis) Ground table area: 550 x 200 mm Magnetic chuck: 500 x 200 mm (standard size) (load incl. magnet max. 200 kg) Transportation and loading can be organized across Europe for an additional charge, upon request. Prices are subject to VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Kodpewnnbrjfx Am Telt Machinery purchase/sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Būklė: naudotas, Technical details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table feed rate: 0.05-4.5 m/min, stepless Speed: grinding spindle 1,780 / 2,050 rpm Klodsu Ng Dgspfx Am Tst Speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2,200x280 mm Table swivels both sides: 9° forward, 10° backward Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDING MACHINE without internal grinding device - For precision grinding of external (and internal) as well as tapered surfaces. - Grinding spindle head infeed manually or hydraulically - Hydraulic, stepless table feed - Grinding spindle swivels 60° - Workpiece spindle head swivels 90°, with Morse taper MK 4 - Tailstock with Morse taper MK 3 Equipment: - Wheel dressing device - Coolant tank incl. pump and feed line in current condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 35 598 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07400004031, ašies variklio galia: 20 W, veleno greitis (min.): 3 250 aps./min, veleno greitis (maks.): 5 000 aps./min, strypo praėjimas: 90 mm, bendras svoris: 10 000 kg, capacità barra 90 mm - 2 torrette motorizzate a 12 posizioni - asse Y sulla torretta superiore - contropunta - CNC Siemens 840D powerline - macchina in condizioni perfette, sempre utilizzata con olio - dotazione utensili molto, molto completa - caricatore di barre LNS Sprint S2. Kljdpouyx Hzsfx Am Tjt