Krovimo platforma

Volvo FM420 4x2 / PALFINGER 18502 - 17 mtr / CRANE / ...

Sąlyga: naudotas, rida: 344 242 km, galia: 309 kW (420,12 AG), kuro tipas: dyzelinas, spalva: balta, ašių konfigūracija: 4x2, padangos dydis: 385/65R22.5, kuras: dyzelinas, ratų bazė: 5 600 mm, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: oras, krovinių skyriaus plotis: 2 470 mm, krovimo vietos ilgis: 6 480 mm, krovos erdvės aukštis: 800 mm, Gamybos metai: 2018,

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: 110-044731, Pasiūlymas 25160 Techniniai duomenys: - Keliamoji galia: 3.200 kg - Vėžės plotis apie: 9.090 mm - Praėjimo aukštis apie: 360 mm - Vežimo sijos ilgis apie: 2.400 mm - Ratų bazė: 1.900 mm - Kablio eiga apie: 6.000 mm - Perjungimas: 2 / 1 - Greičiai: Kjdpfxjw S D Emj Ahwjdw - Vežimėlis apie: 20 m/min + 5 m/min - Kėlimo mechanizmas apie: 5 m/min + 0,8 m/min - Krano eiga apie: 20 m/min + 5 m/min - Valdymas radijo pultu - Bendras svoris – kranas apie: 1.600 kg

Sąlyga: naujas, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Kdedpfx Aefm T Hbehwow Automatic electromechanical band saw in dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard equipment includes: - Powered chip conveyor, mountable on either the right or left side of the machine. - Clamping pressure regulation of the machine vices. - Feeder with vertical rollers for lateral material support. - Sensors for material start detection. - Clamping pressure regulation. - Storage for up to 300 programs. - The machine is available with either a 34 mm or 41 mm blade at no extra cost. Price on request.

Sąlyga: paruoštas naudoti (naudotas), Approx. 120 units = 480 linear meters of safety conductor rails Kjdpfxod Hurbe Ahwsdw Number of conductors/poles: 5 In standard lengths of: 4 m Busbar cross section: 10 mm² For mains voltage up to: 500 V Continuous current capacity (100% duty cycle): 60 A Weight per meter: 2.1 kg

Sąlyga: naujas, Cutting diameter round: approx. 355 mm Cutting diameter square: 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Kdedofg E Hzjpfx Ahwew Total connected load: 4.0 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, fully automatic hydraulic bandsaw machine in dual-column construction for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, installable on the right or left side of the machine. + Adjustable clamping pressure of the vices. + Feed conveyor with vertical rollers for lateral material support. + Numerically controlled bandsaw machine which can also be operated in semi-automatic mode, equipped with the new MEP 50 control system, specifically developed by MEP for automatic machines, based on Windows CE. + "Clean Cut" cycle: the feeder retracts the workpiece to prevent scoring on the cut surface when the band returns to the top at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7" touch screen display and mechanical buttons for machine operations, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Sąlyga: naujas, Gamybos metai: 2025, The BEFARD XJ 55 is a machine offering a reach of over 13.0 m and a maximum lifting capacity of 2,400 kg. The device is fully self-contained and independent. Power is supplied autonomously by the combustion engine (alternatively, operation from a 230V mains power source is also available as an option). The unit comes equipped with radio remote control (operation control). Thanks to its weight, the trailer can be towed by nearly any delivery vehicle and features two braked axles as well. • Maximum load capacity: 2,400 kg • Vertical reach of over 13.0 m – approx. 14.0 m reach with lifting hook • Radio remote control for crane operation • Four hydraulic extensions and one manual extension • Powered by combustion engine (optionally with 230V electric drive) Kodpfx Ahjl Uvhbewodw • Slewing column • Four hydraulically lowerable outriggers Additional optional equipment: • 230V mains power supply (cable operation) • Lifting hook • Li-ion battery operation • Hydraulic winch, 990 kg • Pads for support legs Available in the color of your choice.

Sąlyga: geras (naudotas), rida: 81 222 km, pirmoji registracija: 08/2009, kuro tipas: dyzelinas, spalva: balta, ašių konfigūracija: 4x2, kuras: dyzelinas, pavaros tipas: mechaninis, emisijos klasė: Euro 5, pakaba: plienas, Gamybos metai: 2009, Įranga: ABS, priekabos jungtis,

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Užpildymo sistema, susidedanti iš šių komponentų: Kdedpfx Aevrcfushwsw 1. Skersinė lova: Lovos plotis: 2,8 m Lovos aukštis (žemesnė pusė): tik 0,8 m Lovos gylis: 1,2 m įskaitant viršutinį apsauginį tinklą įskaitant šnekos pavaros variklį 3 kW Galima kairioji ir dešinioji versija Pasirinktinai: važiuoklė, šakinio krautuvo tvirtinimas ir kt. 2. Kylanti šnekos sistema: Ilgis: 2 m (galimi ir kiti ilgiai) Nuolydis reguliuojamas įskaitant šnekos pavaros variklį 3 kW 3. Spaudžiamoji šnekos sistema: Ilgis: 2 m (galimi ir kiti ilgiai) Priekinė pusė atvira Visos šnekos turi 200 mm skersmenį ir yra nuolat suvirintos prie plieninio vamzdžio! (Taip pat galimi didesnių skersmenų šnekai!) Be laidų ir valdymo sistemos Taip pat galime pagaminti individualius sprendimus pagal Jūsų pageidavimą! Kainos be PVM.

Gamybos metai: 1997, Sąlyga: geras (naudotas), Type: DDA:VP-370:A27097 Kdjdpfx Ast S Sxgshwjw Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via gear motor

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, NEW – Electric Chamber Oven KM Pro with Full Equipment (Touch Control – KM Pro) We are offering our KM Pro chamber oven, suitable for parts up to 4000 mm (L) x 1600 mm (W) x 2000 mm (H). Kodpfx Ahetxcrfewjdw As a leading manufacturer of surface technology systems, we provide a virtually unlimited portfolio for powder coating applications. At our site in 47669 Wachtendonk, we turn your individual requirements into reality and produce your custom concept. Thanks to our in-house production of nearly all components, we are highly flexible and able to cater precisely to your needs. With us, you don’t just get your ideal powder coating system – we also support you with extensive user expertise to assist with all matters related to surface technology. Each article offered here is custom manufactured for you. Whether for large or small projects – we deliver complete systems from a single source, tailored to your specifications. We look forward to hearing from you and implementing your ideas together! Technical data: - Heating medium: Electric - Heating type: Recirculating air - Heating power: 60 kW (adjustable) - Recirculating air motor: 3 kW up to 250°C - Connected load: 400 V, 100A - Insulation: 150 mm compressed - Working dimensions: 4000 mm (L) x 1600 mm (W) x 2000 mm (H) - Includes signal light and buzzer for operating status indication - 7-inch touch panel with intuitive operation - PLC control system - Smart operating modes: gelling and open door function with fan speed control for energy and process optimization, Warm Up - Go Home startup scheduler, timer with completion notification per rail (each rail can be timed individually), temperature curve display - 7 rail passes provided (see picture 2) - Access through double-leaf doors on both sides (front + rear) - When used as a chamber oven, one double-leaf door can remain closed. Product also available in other versions (price adjustment depending on configuration): - Heating medium: electric, gas, oil, infrared, wood chips, hybrid, etc. - Furnace chamber sizes can be specified entirely according to your requirements. - Continuous or chamber oven - Loading via rack trolley, rail, or both possible - Further automation upon request