Vikšrinis ekskavatorius

Volvo ECR235 EL excavator w/ digging bucket, sanding buc

Sąlyga: labai geros būklės (naudotas), Power: 220-240VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phases: 1 // Power: 0.4 kW WITH OUTPUT CONVEYOR BELT Return belts: For envelope size 10.5 cm x 14.8 cm and for portrait orientation, the return belts should be pushed towards the central transport belt. Rule: for large envelopes, push the return belts outward; for small envelopes, push the return belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ FEEDER requires no synchronization. Position the feeder into the printing press using the handles and set the required height with the hand crank. Gsdpfeh Eibaox Abdjtt Important: Only after setting the print height, secure the rear rollers and check the machine's stability. Switch on the machine and begin printing. For single-sheet feeder printing machines (GTO): adjustable inclination. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speed. Compatible with all 36 x 52 printing presses, regardless of the feeding system (stream feeder / single-sheet feeder). – No mechanical modifications to the press required. – No synchronization settings needed thanks to laser technology. – Extremely short set-up times enable economic use from as little as 1,000 envelopes – Easy operation – The feeder’s design enforces overlapping feeding. This ensures the Stenz Feeder’s throughput is not restricted – Minimum wear parts for extremely long service life – Already approved in thousands of presses worldwide – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing press Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Sąlyga: geras (naudotas), Drying oven for UV line Gtodpfx Aot Ag Uqobdot

Sąlyga: naudotas, Gamybos metai: 2018, veikimo valandos: 5 697 h,

Sąlyga: labai geros būklės (naudotas), Robland 3200 Silver Line panel saw with sliding table Scoring unit with separate motor, Sliding table length: 320 cm Main motor power: 7 kW 3 spindle speeds Max. blade diameter: 450 mm Blade tilt (0–45°) electrically adjustable with digital readout Blade height adjustment electrically controlled, no digital readout Rip fence on right, motorised adjustment up to 1240 mm Gtsdpfx Asv S Hy Aobdjt Digital readouts on sliding table fence Mitre gauge included Branded machine in very good condition,

Sąlyga: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system Godpjv I Akvefx Abdott - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Sąlyga: geras (naudotas), Gamybos metai: 2020, veikimo valandos: 590 h, Funkcionalumas: nepatikrintas, Įranga: Pagrindinis Methor vikšrinės važiuoklės paketas Vikšrinė važiuoklė su 2 važiavimo greičių režimais Važiuoklės vikšras 400 mm, trijų briaunų Papildoma hidraulinė jungtis 70 l/min 24 V elektros valdymas Didelis pilnas nuotolinio valdymo pultas Patogus priežiūrai variklio skyrius su LED apšvietimu Atlenkiamas bunkeris su kelio jutikliu ir automatiniu valdymu Hidrauliškai reversinis ventiliatorius Akustinė paleidimo įspėjimo signalizacija Kuro bakas 300 litrų Dažymas: RAL 2011 gilus oranžinis Papildoma įranga: Guminiai greito keitimo padėklai Variklis Cat C7.1, 205 kW Galinė juosta 6,9 m Rėmas viršdiržiniam magnetui Viršdiržinis magnetas Greito keitimo volų sistema ant volo Greito keitimo volų sistema ant įrenginio Laistymo sistema Gtedovnq Rkspfx Abdst LED darbo apšvietimas Papildomas elektrinis siurblys valdymui iki variklio sustojimo Gesintuvas GN 9 A-3 DIN EN 3

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, galia: 200 kW (271,92 AG), Atraskite galingą naudotą Komptech senos medienos perdirbimo įrenginį: 2016 metų CRAMBO 5200 E direct užtikrina efektyvų smulkinimą ir lankstų panaudojimą. Įrenginys komplektuotas su žvaigždiniu sietu Multistar 2-SE, pasukamu transporteriu, viršutiniu magnetu ir valdymo spintomis – tai optimalus sprendimas senos medienos ir biomasės apdirbimui. CRAMBO 5200 E direct garsėja tiesioginiu elektriniu pavaros sprendimu, dideliu našumu ir minimaliomis emisijomis – puikus pasirinkimas įmonėms, vertinančioms ekologiškumą ir ekonomiškumą. Tvirtas dizainas ir paprasta priežiūra užtikrina patikimą eksploataciją. Gtedjxv Acqspfx Abdot Techniniai duomenys: žr. dokumentuose (pdf byla).

Sąlyga: naudotas, Gamybos metai: 2021, veikimo valandos: 200 h, Funkcionalumas: nepatikrintas, Įranga: Pagrindinis Methor vikšrinės važiuoklės paketas Gsdpfx Abovnq Trsdett Vikšrinė važiuoklė su 2 važiavimo greičiais 400 mm pločio, trijų briaunų vikšrai Papildoma hidraulinės sistemos jungtis, 70 l/min 24 V elektrinis valdymas Didelis nuotolinio valdymo pultas pilnas Lengvai prižiūrima variklio erdvė su LED apšvietimu Atlenkiamas bunkeris su kelio jutikliu ir automatiniu valdymu Hidrauliškai reversuojamas ventiliatorius Akustinė paleidimo įspėjimo signalizacija Kuro bakas 300 litrų Dažymas: RAL 2011 gilios oranžinės spalvos Papildoma įranga: Greitai keičiami guminiai pamušalai Variklis Cat C7.1, 205 kW Galinė juosta 6,9 m Smulkinimo sistema Size L (8 dantys) Rėmas juostiniam magnetui Juostinis magnetas Volelio greito keitimo sistema volelyje Volelio greito keitimo sistema įrenginyje Laistymo sistema LED darbo apšvietimas Papildomas elektrinis siurblys naudojimui varikliui sustojus

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Used steam boiler Gtsdpetuwc Uofx Abdst Manufacturer: Riello Year of manufacture: 2001 We speak Russian! Viewing by appointment only! Preferably sold to dealers, tradespeople, or for export. All information is provided without guarantee; subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. Of course, we can also take care of all formalities. Loading possible.

Sąlyga: labai geros būklės (naudotas), Motor 5.5 kW Table length: 2 m Gtedpowm Dz Sofx Abdjt Table width: 52 cm 4 knives Working height: 19 cm Top and bottom sides electrically adjustable