Apdirbimo centras

Victor Vcenter-AX800ll

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, X ašies eiga: 600 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 400 mm, greitas poslinkis X ašimi: 35 000 m/min, greitas poslinkis Y ašis: 35 000 m/min, greitasis eiga Z ašyje: 35 000 m/min, ruošinio svoris (maks.): 200 kg, bendras ilgis: 500 mm, bendras plotis: 400 mm, stalo apkrova: 200 kg, sukamosios stalo skersmuo: 280 mm, Coolant system Filtration tank HR 410 handwheel iTNC530 controller 1st owner machine X-axis travel: 600 mm Ljdox R S Smopfx Af Iorg Y-axis travel: 450 mm Z-axis travel: 400 mm A-axis travel: 110° B-axis travel: 360° Table length: 500 mm Table width: 400 mm Table load capacity: 200 kg Table diameter Ø: 280 mm Feed rate X-axis: 35,000 mm/min Feed rate Y-axis: 35,000 mm/min Feed rate Z-axis: 35,000 mm/min Feed rate A-axis: 10°/min Feed rate B-axis: 15°/min Tool holder: 40 ISO/BT/MK Spindle power: 15 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Through spindle coolant (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant unit: Yes Length: 3,500 mm Width: 3,500 mm Height: 2,800 mm Weight: 6,600 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all critical details.

Sąlyga: naudotas, Gamybos metai: 2008, tekėjimo skersmuo: 275 mm, veleno skylė: 80 mm, veleno greitis (maks.): 4 000 aps./min, X ašies eiga: 260 mm, Z ašies eigos atstumas: 1 345 mm, bendras aukštis: 2 232 mm, bendras ilgis: 4 339 mm, bendras plotis: 2 232 mm, bendras svoris: 7 600 kg, Įranga: dokumentacija / vadovas, Mori Seiki NL 2500 SY / 1250 CNC tekinimo staklės su Y ašimi, varomais įrankiais ir antrąja velene CNC valdymas MSX-850-III (mitsubishi 720 BM) Sukimo skersmuo 275 /366 mm Velenu pragręžimo skersmuo 80 mm Veleno sūkių dažnis 4000 aps./min Veleno variklis 18,5/15 kW X ašies eiga 260 mm Y ašies eiga +50 / -50 mm Z ašies eiga: 1345 mm Lrodpjxnmzhsfx Af Iog W ašies eiga (priešinis velenas iki pagrindinio veleno) 1275 mm Min. C ašies (pagrindinio veleno) indeksavimo žingsnis 0,001° Revolverio įrankių kiekis 12x Varomų įrankių kiekis 12x Įrankio konusas BMT Strypų padavėjas LNS Quick Load Servo III Varomų įrankių veleno sūkių dažnis 6000 aps./min Jei turite klausimų apie įrenginį ar norite apsilankyti, susisiekite su mumis telefonu arba el. paštu. Taip pat kviečiame peržiūrėti kitus mūsų skelbimus – gaukite visapusišką apžvalgą apie mūsų sandėlio atsargas.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GS1000/5-T, sukimosi greitis (maks.): 30 000 aps./min, bendras svoris: 15 500 kg, Pagaminimo metai: 2014 Būklė: labai gera Magazinas: 66 x HSK63 Valdymas: Heidenhain 530 Velenas: n=30.000 Erowa nulio taško tvirtinimo sistema integruota stalo viduje Erowa robot easy 250 automatizacija su 6 padėklais 3D matavimo sistema Lrsdpfx Aew Awmtef Ieg Didelio dažnio veleno alyvos-oro tepimas Lazerinis matavimas Veleno darbo valandos:

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, x-axis travel: 800 mm y-axis travel: 600 mm z-axis travel: 500 mm O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following from stock, non-binding: HERMLE 5-Axis Universal Machining Center in gantry design with swivel rotary table Lredsx Dndcspfx Af Ijg Model: C 800 U Year of manufacture: 1998 12648 _____ Milling head travel longitudinal X-axis: 800 mm Milling head travel transverse Y-axis: 600 mm Milling head vertical Z-axis: 500 mm NC tilting axis A-axis: -20 / +90 ° NC rotary table C-axis: 360,000 ° Overhang of the vertical spindle max. approx.: 600 mm Installation height under spindle max. approx.: 100 / 600 mm Table size (swing diameter Ø 630 mm): 540 x 540 mm Max. workpiece weight on table approx.: 300 kg Spindle interface: SK 40 Spindle speeds vertical, infinitely variable: 18,000 rpm Feed rates/rapid traverses infinitely variable: 2 – 35,000 mm/min Feed force approx.: 11/16 Nm Spindle drive: 15 kW Total power approx.: 37 kW – 400 V – 50 Hz Weight approx.: 8,000 kg Accessories / Special Features: • Compact, modified gantry design with 3 axes in the milling head for feed rates up to 35 m/min. All drives and guides are outside the working area. • Machine base made of mineral cast with high damping properties, foundation-free installation, high static and dynamic stability. • SIEMENS 5-axis path control type 840 D with graphics and all modern programming options for full 5-axis machining of complex workpieces with electronic handwheel • NC swivel rotary table (C-axis 360,000° / B-axis -20/+90°) Ø 630 mm • Robust vertical head with HERMLE milling spindle up to 18,000 rpm with automatic swivel nozzle block • Tool changer with extended (additional) magazine for up to 87 tools • Coolant system with chip conveyor, oil mist extraction with filter, full enclosure • Extensive accessories including approx. 50 tool holders, operating manuals. Condition: very good – machine under power and ready for demonstration A video of the machine will be available here shortly (please click on the link): C 800 U/4 Delivery: ex stock – immediately available, FCA Metzingen Payment: strictly net – due immediately upon receipt of invoice, prior to delivery of the machine

Sąlyga: naudotas, Gamybos metai: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected in our facility. Free loading onto truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control system: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Maximum table rotation: 30 rpm Spindle speed: 20 - 8,000 rpm Gear steps: 2 Maximum workpiece diameter: 1250 mm Maximum workpiece height: 1580 mm Clamping surface: 800 x 800 mm Maximum workpiece weight: 1,500 kg Pallet weight: 570 kg Maximum allowable pallet load difference: 1,000 kg Tool holder: SK 50 according to DIN 69871 Ljdsw Ew T Sopfx Af Ijrg Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction system Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30bar (new) 1x GEAR UNIT P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox*F1C-A25 (new) 1x Retrofit kit power module (new) 1x Lifting devices for the machine

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2018, X ašies eiga: 470 mm, Z ašies eigos atstumas: 876 mm, ašies variklio galia: 30 000 W, veleno greitis (maks.): 1 250 aps./min, greitas poslinkis X ašimi: 24 000 m/min, greitas poslinkis Y ašis: 24 000 m/min, tekėjimo skersmuo: 1 000 mm, bendras ilgis: 2 375 mm, bendras aukštis: 3 659 mm, bendras plotis: 4 558 mm, įvesties srovės tipas: trifazis, sukimo momentas: 3 655 Nm, įėjimo įtampa: 400 V, bendras svoris: 14 000 kg, Įranga: aušinimo blokas, CNC vertikalus tekinimo staklės MAZAK Mega Turn 900 TECHNINĖS CHARAKTERISTIKOS: CNC valdymas: MAZATROL SmoothG Maks. tekinimo skersmuo: 920 [mm] Maks. pjovimo skersmuo: 1000 [mm] X ašies eiga: 470 [mm] Z ašies eiga: 876 [mm] Lrjdpfx Aow T Tmpof Iog X ašies greitas judesys: 24000 [mm/min] Y ašies greitas judesys: 24000 [mm/min] Veleno nosis: A2-15 Maks. veleno apsukos: 1250 [aps./min] Veleno galia: 30 [kW] Veleno sukimo momentas: 3655 [Nm] Min. atstumas nuo veleno priekinės dalies iki revolverio: 154 [mm] Didžiausias ruošinio svoris: 3000 [kg] Maks. atstumas nuo veleno priekinės dalies iki revolverio: 1030 [mm] Įrankių stotelių skaičius: 12 Revolverio perstatymo laikas: 0,4 [s/poz.] Tepimo bako talpa: 516 [l] Bendra reikalinga galia: 58,9 [kVA] Maitinimo įtampa: 400 [V] Matmenys: 2375 × 4558 × 3659 [mm] Svoris: 14000 [kg] Daugiau informacijos – pagal užklausą.

Sąlyga: naudotas, Gamybos metai: 2007, Sūkių skaičius 8000 /min Svoris 5500 kg Lodpfxowm Rqas Af Isrg Pagaminimo metai 2007 Valdymas Siemens 840D Matmenys (Ilgis/Plotis/Aukštis) 3600 x 2800 x 2400 mm Eigos ilgis - x 1035 mm Eigos ilgis - y 560 mm Eigos ilgis - z 510 mm Yra daugiau nuotraukų

Sąlyga: geras (naudotas), Gamybos metai: 1963, Vertical Turning Lathe Manufacturer: JUNGENTHAL, Type: DK 1400, Year: 1963, equipped with 1-axis digital readout. Maximum turning diameter: 1400 mm Faceplate: 1250 mm automatic turret head Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min Lrsdpfx Asvi Hrysf Ieg For additional specifications, please refer to the data sheet. Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t In good overall condition.

Sąlyga: naudotas, Gamybos metai: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Maximum clearance between columns: 3,000 mm Maximum clearance height: 1,950 mm Maximum distance from spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Main spindle speed range: up to 18,000 rpm Main spindle drive power: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Type P 8002320/00-4 Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Table clamping surface: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Ljdpfsvy Ihdex Af Ijrg Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool positions: 327 pcs. Number of tool positions HSK A63: 156 pcs. Number of tool positions HSK A100: 171 pcs. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total connected load: 150 kVA Space requirement approx. 25.0 x 12.0 x 7.0 m 5-Axis Gantry Large Machining Center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools subject to agreement

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2001, Nachgerüstet: 2024 Numerische Steuerung: HEIDENHAIN TNC426 Technische Daten Abmessungen Tischabmessungen: 3500 x 1100 mm Anzahl T-Nuten: 8 T-Nuten-Maße: 22 mm Achsenverfahrwege X-Achse: 3000 mm Y-Achse: 1200 mm Lredpsugbq Tjfx Af Ieg Z-Achse: 1000 mm Fräskopf Kopfart: Universal-Manual-Längsfräskopf (UL40) Werkzeugaufnahme: Hydraulisch Kegelaufnahme: ISO 50 (DIN 69871) / Zugbolzen: DIN 69872 Drehzahlbereich: 20 - 3000 min⁻¹ Spindelleistung: 29,6 kW Vorschübe Vorschub: 2 - 5000 mm/min Eilgang (X / Y, Z): 15000 / 10000 mm/min Gewicht und Abmessungen Maximale Tischbelastung: 8000 kg Maschinengewicht ca.: 20.000 kg Maschinenabmessungen ca.: 7900 x 4670 x 2900 mm Zubehör Externes Hochdruck-Kühlschmiersystem durch die Spindel Elektronisches Handrad: HR-130 Schutzeinrichtungen Verkaufsbedingungen Garantie: 6 Monate auf mechanische Teile Verkaufspreis (ab Werk): auf Anfrage Alle technischen Daten anzeigen