Dažų parduotuvė

Ventherm

Būklė: naujas, Gamybos metai: 2026, bendras aukštis: 3 000 mm, bendras ilgis: 4 900 mm, bendras plotis: 2 400 mm, tūrio srautas: 3,6 m³/val, įvesties srovės tipas: trifazis, galia: 1,1 kW (1,50 AG), Įranga: kabina, Wet paint spraying booth in cabin with extraction and supply air filter, lighting. Giedpsrvi Riofx Ah Aet

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive Godjv I Akvepfx Ah Asit - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Būklė: naudotas, Gamybos metai: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CETRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right saw unit is fixed; the left unit can be adjusted. The preset cutting length can be read on a digital measuring display. Both units feature supports that enable the simultaneous cutting of 2 glazing beads. To cut larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swing aside to facilitate the loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measuring display • Pressure switch • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool kit • Safety guards with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit stroke • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Space requirement (standard equipment): 3000 x 850 mm Gedpfexnlgcox Ah Aoit EXTENDED CUTTING CAPACITY 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for adjusting up to 4 intermediate angles Additional central support 1 pc Adaptations for rebated profiles 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for the profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (in green), a beveled pusher is shown, which follows the inclined profile and presses it against the (red) spacer on the stop. Location: Garbsen

Būklė: naujas, Grinding range: 2 - 20 mm Point angle min./max.: 90 - 135 degrees Connection rating: 230 V Machine weight: approx. 8.6 kg Space requirement: approx. 0.35 x 0.2 x 0.2 m Packaging dimensions: 340 x 270 x 410 mm Weight: 8.6 kg Gijdpfsupxkwex Ah Aot

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Gsdpoqt Dmyofx Ah Aeit Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: naujas, DESCRIPTION Giodpfxsd Ixade Ah Ajt DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 100 h, Specializuojamės pūstuvų, kompresorių ir vakuuminių siurblių atnaujinime. Remontuojame tokių gamintojų įrangą kaip: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, Tuthill. Taip pat siūlome pūstuvų ir kompresorių nuomą. Veikiame visoje Europoje ir už jos ribų. Gisdpfen Tntqsx Ah Aot

Būklė: labai geros būklės (naudotas), Gamybos metai: 1982, ULMIA 1710s Table Saw Year of manufacture: 1982 Tilt angle: 45° Cutting length on sliding table: 750 mm Giedpfx Ahsufgnzs Aot Max. saw blade diameter: 250 mm Cutting height: 75 mm Cutting width between saw blade and fence: 650 mm Sliding table with angle cutting scale Table size: 1000 x 630 mm

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, galia: 12 kW (16,32 AG), vidinis ilgis: 1 000 mm, vidinis plotis: 1 000 mm, vidinis aukštis: 1 000 mm, bendras ilgis: 1 395 mm, bendras plotis: 1 600 mm, bendras aukštis: 2 045 mm, pavaros tipas: elektrinis, kuro tipas: elektrinis, Įranga: CE žymėjimas, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Immediately available ⚡ Professional support! plus VAT, plus shipping costs. ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual shipping quote. ✅ Immediately available – 1 unit in stock ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty Available from stock – no production lead time ➖➖➖➖➖ ⭐ Matech Powder Curing Oven with Electric Heating – MATOVENB-101010 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Immediately available ☘️ Professional curing ✅ Electrically heated powder curing oven ✅ Stock item – ready for immediate delivery ✅ No production waiting time Gedpfx Asghf R Uoh Asit ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Adjustable automatic exhaust fan function ✅ Acoustic signal at the end of curing ✅ Insulated door with special locking system ✅ Robust sandwich panel construction ✅ Excellent heat retention due to enhanced insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shutdown after process completion ✅ Can be used with a movable workpiece trolley ➖➖➖➖➖ Technical Specifications: ✔️ Model: MATOVENB-101010 ✔️ Internal dimensions: 1000 mm L x 1000 mm W x 1000 mm H ✔️ External dimensions: 1600 mm L x 1395 mm W x 2050 mm H ✔️ Electric heating power: 12 kW ✔️ Blower capacity: 1,500 m³/h ✔️ Recirculation fan: 0.75 kW ✔️ Total power: approx. 14 kW ±10% ✔️ Digital temperature control ✔️ Continuously adjustable temperature up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm mineral wool + 100 mm fiberglass ✔️ Adjustable curing time ✔️ Adjustable exhaust fan operation ✔️ Audible signal after process completion ✔️ Control panel: 1 unit ➖➖➖➖➖ Secure your stock unit now! This unit is currently available 1 x in stock. Ideal for workshops, small production facilities, and businesses looking for a reliable electric solution for professional powder coating at short notice. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models. Feel free to contact us for leasing, hire-purchase, or installment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and secure the advantage of service and quality! ✨ Enquire now – get your business ready for professional powder coating! ☀️ 2 YEARS WARRANTY ☀️

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, veikimo valandos: 20 200 h, keliamoji galia: 5 500 kg, kuro tipas: dujos, Įranga: griebtuvo hidraulika, spaustukas, For sale is a Hyster brand LPG forklift, model S 5.5FT. The forklift is fully functional and in good condition. Please note: The unit is offered not as shown with forks, but with a Mayer paper roll clamp featuring rotational hydraulics from 2005 (see last picture). Technical specifications: Year of manufacture: 2012 Rated capacity: 5,500 kg (5.5 tons) Load center: 600 mm Turning radius: approx. 2,375 mm - 2,534 mm Lifting height: up to 5,300 mm Free lift: available Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (loaded/unloaded): approx. 16.7 - 17.2 km/h Dimensions: approx. 3,500 mm × 1,420 mm × 2,500 mm Weight: approx. 7,800 kg Transport and loading can be arranged across Europe at additional cost upon request. Prices are subject to VAT. Gijdpfewalyiex Ah Ast Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, visit our website.