Konvejerinė džiovinimo krosnelė

VEI-Engineering VEI_DLO_EB 350-720

Būklė: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories Nwedpfx Afoh Rdwxoxeg - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Gamybos metai: 2021, būklė: naujas, mašinos/transporto priemonės numeris: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm horizontal + 2200mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800mm Height of the horizontal section: 200mm top edge PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU, petrol matt finish Belt width: 500mm 21 pcs. T30 cleats welded on, pitch 310mm * Antistatic due to threads in the running side fabric Endless welded with stepped finger joint 40mm corrugated edge, both sides, high-frequency welded * Edge-free zone on both sides for belt guidance on the incline Full-surface support plate Drive: Motor approx. 1.1kW Belt speed: approx. 0.4 m/sec * Optionally controllable with frequency inverter Connection: 220/400V, 50Hz, protection class IP54 Nwedpfsh Eld Eex Afxeg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 14 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3294, įvesties srovės tipas: trifazis, galia: 90 kW (122,37 AG), įėjimo įtampa: 400 V, Parduodame Nova pellet spaudos liniją, pagamintą 2019 m., gamyba pradėta 2020 m. - Granulių presas N-MIDI 90 kW, 14 000 valandų (labai gerai ir kasdien prižiūrimas, 2026 m. nauji volai ir matrica) – pagamintas 2019 m. - Vertikalus transportavimo elevatorius, apie 10 m aukščio – 2019 m. - Vėsinimo bokštas N-CO700 – 2019 m. - Valdymo spinta – NAUJA, NENAUDOTA Papildomai už atskirą kainą parduodamas sunkiems darbams skirtas smulkintuvas Miller M16 (37 kW elektros variklis) – NAUJAS, NENAUDOTAS – 25 000 € be PVM Parduodami tik aukščiau išvardinti įrenginiai (be ciklono, filtrų ir pan.)! Nwsdpfxswahhco Afxjg Linija labai geros būklės, nuolat gerai prižiūrėta. Dėl detalesnės informacijos rašykite arba skambinkite kontaktais.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Processing plant for (track) ballast 40 m³ feed hopper with push wagon Impact crusher OMT 120 kW with feed and discharge chutes Double-deck screening unit 1,400 x 4,000 mm with conveyor and stockpile belts Nwedpfxstpamgo Afxjg complete electrical installation

Būklė: labai geros būklės (naudotas), The plant essentially consists of: Nsdpfx Afslxzl Eoxswg - 2 feeding units (walking floor bunkers) - 2 silos, each with 55 cbm, equipped with discharge screws - 2 screw conveyors - 4 mixing and homogenization chambers - 5 transport conveyor belts - 2 parallel-operated twin-shaft extruders for processing woody biomass - 1 twin-shaft paddle mixer - twin-shaft extruder for homogenization - laboratory container with mixing and dosing system for liquid extracts

Gamybos metai: 2024, būklė: naujas, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Nwedpfx Ajftdh Iofxeg Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at our showroom in Staufenberg by prior appointment at any time. Additional machines are available for demonstration at our facility in Staufenberg. Further information is available upon request.

Būklė: labai geros būklės (naudotas), Gamintojas: Strautmann Nwedpfxov Aiyms Afxjg Tipas: PP 1207 Plus Balių formatas (I x P x A): 1200 x 1100 x 730 mm Balių svoris: apie 400–500 kg Išoriniai matmenys (I x P x A): 1850 x 1047 x 3079 mm Transportavimo aukštis: 2500 mm Užpildymo anga: 1190 x 600 mm Spaudimo jėga: 59 t / 580 kN Našumas: 1–2 baliai/val. Rišimų skaičius: 4 Preso svoris: 2300 kg Energijos tiekimas: 400 V / 50 Hz Galia: 4 kW Montavimo vieta: po stogu viduje/lauke Triukšmo lygis: mažiau nei 80 dB(A) Gamybos metai: 2003–2005 Taip pat turiu Strautmann PP 1207 presus, 2009–2011 metų, kaina 5500 EUR Taip pat turiu Strautmann PP 1208 presus, 2014–2015 metų Strautmann AutoLoadBaler, 2018 metų, kaina 7500 EUR

Būklė: naujas, RHTC 100 TON M/H-M/C-2 hidraulinis presas Nedpfx Aoxwk E Aefxowg Modelis: 100 TON M/H-M/C-2 Metai: 2025 Būklė: Naujas Atsargos numeris: 2796 Darbinis plotis: 1000 mm Eiga: 380 mm Maksimali galia: 100 tonų

Būklė: beveik kaip naujas (naudotas), The MSP 120 ZK is ideally suited for the shredding and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder consists of a hydraulic chip press and a preceding shredder, which are precisely matched to each other. The system allows for the reduction in size and compaction of chips generated during turning/milling processes. The volume is significantly reduced, and the briquettes are separated from coolants (coolant emulsion, oil) that may have been absorbed during prior machining stages. The system consists of a feed hopper into which the material to be processed is introduced, and an integrated shredder that reduces the length of the chips. A conveyor system continuously and gradually transports the shredded chips via a conveyor belt into the hopper of the chip press. Here, two screw conveyors transport the material into the compaction chamber. The system includes a monitored liquid collection tank and a pump. The coolants can be returned to the production process. Cycle control is managed via a PLC and an electronic level sensor for monitoring the fill level in the hopper. Optionally, a tipping device for manual filling of the system can be added if required. Briquetting Press: Throughput (Aluminium): 15-20 kg/h Throughput (Steel, Copper): 45-60 kg/h Ø Briquettes: 60 mm Productivity: 120-180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank capacity: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Nwodpjw R Ranefx Afxog Shredder: Cutter shaft: 1 pc Motor power: 5.5 kW Number of cutters: 16 pcs Cutters replaceable: yes Cutter size: 25 mm Cutter material: Hardened steel Shaft length: 400 mm Screen size: 20 mm Ø Feed hopper dimension: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power connection: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint RAL 7035 light grey

Būklė: labai geros būklės (naudotas), Weiss Type: WKL 34/60 Weiss climatic chamber, air-cooled Refrigerant converted to R-452A -60°C to 150°C Chamber volume: 34 liters Feed-throughs in standard configuration installed: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -60 to +150 °C Temperature deviations under steady-state conditions (according to IEC 60068-3-5): Temporal fluctuation at center of workspace: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Nwedpfstr Dinjx Afxeg Specifications for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (steady-state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.H. Operational data: Test chamber illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10% 50 Hz Rated power: 2.5 kW Rated current: 11 A Protection (on-site): 16A slow-blow Heat emission (air-cooled chamber): Maximum heat emission to ambient: 1700 W Refrigerant: R-452A / R23 Weight: 140 kg Important safety information for the buyer! The following points will be completed on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful completion, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) We are happy to answer further questions by phone.