BOEHRINGER VDF 400 CM

VDF Boehringer VDF 400 CM

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, X ašies eiga: 620 mm, Z ašies eigos atstumas: 2 000 mm, Strypo skersmuo (maks.): 110 mm, valdiklių gamintojas: SIEMENS, valdiklio modelis: 840D, ašių skaičius: 3, 2007 m. pagamintos horizontalios tekinimo staklės. Ši BOEHRINGER VDF 400 CM turi 500 mm griebtuvą ir gyvą įrankį, užtikrinantį didesnį universalumą. Jos X ašies eiga yra įspūdinga - 620 mm, o Y ašies eiga - 2000 mm. Jei ieškote aukštos kokybės tekinimo galimybių, apsvarstykite mūsų parduodamas BOEHRINGER VDF 400 CM stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Griebtuvo skersmuo: 500 mm Technical Specification Driven Tools Yes Nwedpfjzzp Aujx Anxjn Counter Spindle No

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Maximum spindle speed: 6,300 rpm Nwodsuhauyjpfx Anxsn - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor system KNOLL VRF 500 - Workpiece evacuation with conveyor at position 6

Būklė: naudotas, Gamybos metai: 2007, Turning length 2,500 mm Control system: Sinumerik 840 D Spindle nose: A 11 Number of tools: 48 Swing diameter over cross slide: 750 mm Swing diameter over bed: 780 mm C-axis: 0.1–30 rpm Nwjdswwaruepfx Anxen Quill diameter: 160 mm Internal taper: MT 5 Maximum tool length: 500 mm Maximum tool weight: 15 kg Machine weight: approx. 27 t Required space: approx. 8.4 x 4.0 x 2.5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over cross slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle nose according to DIN 55026: A 11 Through bore: 123 mm Front bearing diameter: 200 mm Spindle orientation: 0–359 degrees Drive power at 100/60% duty cycle: 37/45 kW Total speed range: 10–2,500 rpm Number of speed ranges: 2 Speed range I: 10–775 rpm Speed range II: 20–2,500 rpm Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm)

Būklė: geras (naudotas), Gamybos metai: 2001, Mašina yra geros būklės. Rankoje rodomos dalys nepridedamos. Pjovimo įrankiai nepridedami. Nedpjrpk Rmsfx Anxewn

Būklė: labai geros būklės (naudotas), For sale: Rafamet underfloor wheel lathe, Polish-made. The machine is in good working condition after electrical and control system modernization carried out by Rafamet. The machine was operational until disassembly and is now dismantled, ready for loading. Nodpsmidwcjfx Anxown Technical data: - Track gauge (standard): 1435 mm - Track gauge (special): 1524 or 1676 mm - Wheel diameter: 800–1500 mm - Minimum distance between wheelset axles: 1500 mm - Maximum axle clamping force on rails: 25 tons - Drive roller speed (stepless): 15–82 rpm - Drive roller circumferential speed: 7.5–43 mm/min - Copying carriage feed rate (stepless): 0.95–34 mm/min - External lifts travel: 540 mm/min - Internal lifts travel: 410 mm/min - Carriage travel: 2300 mm/min - Traversing rail travel: 9000 mm/min - Weight with standard equipment: 25,200 kg - Installed power: 83 kW (58 kW after modernization)

Gamybos metai: 2000, būklė: geras (naudotas), Le parti mostrate a mano non sono incluse. Lunghezza 1350 mm, diametro 480 mm. Nodpopy Eqmsfx Anxjwn

Būklė: geras (naudotas), X ašies eiga: 12 000 mm, Y ašies eiga: 7 300 mm, Z ašies eigos atstumas: 3 000 mm, bendras ilgis: 30 000 mm, stalo ilgis: 12 000 mm, stalo plotis: 4 730 mm, bendras plotis: 12 000 mm, bendras aukštis: 10 475 mm, stalo apkrova: 250 000 kg, bendras svoris: 400 000 kg, Portal Milling Machine WALDRICH SIEGEN - PF-F-150 Nsdpfx Asytrxkonxswn Manufacturer: Waldrich-Siegen - Type: PF-F-150(1)-530/400 X-Axis: 12,000 mm Y-Axis: 7,300 mm Z-Axis: 3,000 mm W-Axis: 4,000 mm Distance between uprights: 5,000 mm Table width: 4,730 mm Table length: 12,000 mm Table load capacity: 19 t/m – approx. 250 t total Table traverse speed: 10,000 mm/min W-Axis feed: 3,000 mm/min T-Axis feed: 6,000 mm/min Transversely movable milling head Vertically adjustable cross beam Horizontal hydrostatic spindle ram Milling spindle diameter: 560 mm Tool holder: ISO 60 C-Axis feed: 5,000 mm/min Milling motor: 90 kW Spindle speed: 2,500 rpm Z-Axis travel: 3,000 mm Z-Axis feed: 2,000 mm/min Küma angle head WF2 – 90 kW – 450 rpm Küma universal milling head UB1D – 60 kW – 2,400 rpm Küma fixed head GB1D – 90 kW – 2,400 rpm Küma angle head WF1 Power supply: 3 × 400 V / 50 Hz Power requirement: 600 kVA / 630 Amps Coolant system: 4,000 liters – Coolant through the spindle 20 / 40 bar Machine overhauled in 2004 by Schiess Bed – Table Assembly: • Renewal of slideways • Regrinding of guideways • Renewal of table drive • Direct linear measuring system • Hydrostatic guideways Portal and Cross Beam: • Modification of adjustment spindle • Trapezoidal spindle replaced by ball screw • Direct linear measuring system • New drive motors to increase milling axes traverse speeds • New milling slide with hydrostatic guideways Electrical System: • Completely new control cabinet • Complete new wiring • Siemens Sinumerik 840D CNC – 6 axes Equipment: • Completely new Raumag-Janich protective covers • Completely new double chip conveyor • Large tool package • Extensive clamping devices Machine under power in Europe Immediately available Controlled axes: X / Y / Z / W / C / B Overall height: 10,475 mm Overall width: 11,934 mm Overall length: 30,000 mm Total weight: approx. 400,000 kg Completely overhauled in 2004 for EUR 2,200,000! This CNC portal milling machine from Waldrich was used in the energy sector for machining steam turbine casings. Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, they do not constitute representations or warranty terms. We recommend verifying all crucial details.

Būklė: geras (naudotas), veleno skylė: 360 mm, X ašies eiga: 798 mm, Z ašies eigos atstumas: 358 mm, ašies variklio galia: 45 000 W, sukimosi greitis (maks.): 500 aps./min, bendras aukštis: 2 100 mm, bendras ilgis: 8 100 mm, bendras plotis: 2 750 mm, bendras svoris: 13 000 kg, Maks. tekinimo diametras: 665 mm X ašis: 798 mm Z ašis: 358 mm Veleno skylė: 360 mm Sukimosi greitis: 500 aps./min. Veleno galia: 45 kW Pinolės tvirtinimas: 6 Mk Pinolės eiga: 230 mm Pinolės diametras: 150 mm Ilgis: 8100 mm Plotis: 275 mm Aukštis: 2100 mm Svoris: 13 000 kg Nwsdpfx Anjwxb Eroxen Atkreipkite dėmesį: informacija šiame puslapyje pateikta remiantis mūsų žiniomis ir, kiek įmanoma, gauta iš gamintojo. Informacija pateikta geranoriškai, bet tikslumas negarantuojamas. Todėl jie nėra pasiūlymas ar sutarties sąlygos. Rekomenduojame patikrinti visus svarbiausius duomenis.

Būklė: naudotas, TECHNINIAI DUOMENYS - Ašių skaičius: 7 - Velenų skaičius: 2 PAGRINDINIS VELENAS - Maks. strypo skersmuo: 32 [mm] - Maks. apdirbamas ilgis: 250 [mm] - Veleno apsukos: 7000 [aps./min.] - Minimali C ašies rezoliucija: 0,1 [laipsnio] PRIEŠPRIEŠINIS VELENAS - Maks. strypo skersmuo: 32 [mm] - Veleno apsukos: 7000 [aps./min.] - Įvorinių laikiklių skaičius: 2 ĮVORINIS LAIKIKLIS 1 - Pozicijų skaičius: 5 Nwodpfsyhrlyox Anxen - Varomų pozicijų skaičius: 4 - Varomų įrankių greitis: 5000 [aps./min.] ĮVORINIS LAIKIKLIS 2 - Pozicijų skaičius: 5 PRIEKINIS ĮTAISAS - Pozicijų skaičius: 5 ANTRINIS APDIRBIMAS - Pozicijų skaičius: 4 ELEKTROS TIEKIMAS - Maitinimo įtampa: 380 [V] SVORIS IR MATMENYS - Užimamas plotas: 2150x1500 [mm] - Mašinos aukštis: 1800 [mm] - Mašinos svoris: 2800 [kg] DARBINĖS VALANDOS - Darbo valandos: 23884 [val.] PRIEDAI - Valdymas: Fanuc - 3 spalvų būsenos lemputė - Detalių paėmimo įrenginys - Detalių išstūmėjas - Aušinimo skysčio bakas - Hidraulinis strypų padavimo magazinas, markė/modelis: IEMCA BOSS 332

Būklė: naudotas, Gamybos metai: 1987, x-axis travel: 400 mm y-axis travel: 250 mm Workpiece height: 485 mm Control: ELESTA CNC 314 Total power requirement: 10 kW Machine weight approx.: 4,000 kg Space requirement approx.: [please specify dimensions] m H A U S E R (Switzerland) CNC controlled coordinate grinding machine Model: S 3 – CNC 314 Year of manufacture: 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx.: 600 x 380 mm Table load capacity approx.: 300 kg Maximum longitudinal table travel (X): 400 mm Maximum cross table travel (Y): 250 mm Maximum vertical adjustment of grinding slide (W): 450 mm Maximum grinding spindle stroke (Z): 120 mm Grinding head stroke, hydraulic: 15 - 7,500 mm/min Installation height table/grinding spindle min./max.: -75 / +485 mm Grinding spindle overhang: 350 mm Maximum angular grinding: 16° Maximum bore grinding diameter approx.: 230 mm 18 spindle speeds, depending on spindle motor Continuously variable: 4,500–80,000 rpm Planetary rotation speed (C), continuously variable: 5–250 rpm U-axis, radial feed: 6 mm Total drive approx.: 10 kW - 380 V – 50 Hz Machine weight approx.: 4,000 kg Accessories / Special Features: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with monitor for 4 axes (=XYC+U-axis), interpolation in 2.5 dimensions (XYC). Nsdpfot Hw Txex Anxswn The U-axis is a feed axis and is not interpolatable. Teach-in programming directly on the machine, with various subprograms, as well as manual movement of the axes at the control panel or with electronic hand unit. Separate digital readout for Z-axis • U-axis as manual and controlled radial feed axis at the grinding head, with digital readout of feed size • 2 grinding motors #5674 and 3980 up to a spindle speed of 80,000 rpm • Built-in acoustic grinding contact monitoring device KSV 5 • HI-Cut device (oil cooling) and automatic fire protection system • Free-standing coolant system with belt filter, separate hydraulic unit and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock, as inspected Payment: strictly net - upon receipt of invoice