Tekinimo staklės - valdomos pagal ciklą

VDF Boehringer DUS 400 ti

Gamybos metai: 1985, Sąlyga: paruoštas naudoti (naudotas), Table dimensions: 1435x460 mm, number/width/spacing: 5/16/80 mm, control unit: TNCi-120, length: 1435 mm, width: 2330 mm, height: 1648 mm, weight: 3.1 t, with documentation, accessories available, no known defects, on-site inspection possible. Iajdpfelbmupjx Af Ijl

Sąlyga: geras (naudotas), Gamybos metai: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Ijdpfxev Drigj Af Ioal Tool turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travels: X-axis: 160 mm Z-axis: 450 mm Feeds: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Connected load Machine weight approx.: 3.7 t Space requirement approx.: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Sąlyga: geras (naudotas), Gamybos metai: 2002, HEIDENHAIN TNC 430 control Spindle speed: 20 – 9,000 rpm Iajdpfx Afowglfxj Iol Travel paths: X = 500 mm, Y = 400 mm, Z = 400 mm Tool holder: SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface: Ø 700 x 500 mm Max. table load: 200 kg Infrared probe for workpiece measurement

Sąlyga: paruoštas naudoti (naudotas), Travel distances X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm–0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Isdpfx Afjuqackj Ijal

Sąlyga: geras (naudotas), Gamybos metai: 2005, X ašies eiga: 780 mm, Y ašies eiga: 560 mm, valdiklių gamintojas: Heidenhain, valdiklio modelis: Mill Plus, stalo ilgis: 700 mm, veleno greitis (maks.): 12 000 aps./min, 60 tool stations. 2-fold pallet changer. IKZ – spindle with 12,000 rpm, 40 bar. Operating mode 4 for working with the door open. Blum laser, with tool measurement and tool breakage control. Prepared for Blum 3D probe. Probe not included in scope of delivery. Iaodpfxju S A Ano Af Isl

Sąlyga: geras (naudotas), Gamybos metai: 1998, Battenfeld 600/200 CDC Iodpfog Emvhjx Af Ijal Unilog 4000 Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Shot weight approx. 90 g

Sąlyga: geras (naudotas), Gamybos metai: 2004, Swing over bed Ø: 320 mm Swing over cross slide: 150 mm Turning length: 750 mm Spindle bore: 52 mm Spindle power: 16 kW Isdpfxewu Dq As Af Ieal Quill diameter: 60 mm Quill stroke: 140 mm Spindle taper: 4 Mk Spindle speed: 3000 rpm Feed X-axis: 1000 mm/min Feed Z-axis: 2000 mm/min

Sąlyga: naudotas, Gamybos metai: 1996, Drill diameter: 3 - 50 mm Drill length: 500 mm Point angle: 90 - 140° Operating voltage: 380 V Machine weight: approx. 120 kg Space requirements: approx. 0.80 x 0.60 x 1.30 m - Factory no.: 2374 Ijdpfx Aep Raizef Isal - Drill grinding machine without drill holder and setting gauge

Sąlyga: naudotas, Various tool holders from Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken, and others. Turning and milling tools with VDI 40 shank. Available only by pallet. Pallet 5: EUR 2,730 total Ijdpfx Asvry T Nef Ioal 3x driven tool VDI 40 at EUR 580/each 11x tool holder VDI 40 at EUR 90/each Pallet 6: EUR 2,640 total 3x driven tool VDI 40 at EUR 580/each 10x tool holder VDI 40 at EUR 90/each Pallet 7: EUR 2,640 total 3x driven tool VDI 40 at EUR 580/each 10x tool holder VDI 40 at EUR 90/each Pallet 8: EUR 2,730 total 3x driven tool VDI 40 at EUR 580/each 11x tool holder VDI 40 at EUR 90/each

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 480 mm, • Turret overhauled in 2021 • Coolant pump with increased pressure/capacity fitted in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts using a robot cell Control: CNC control including color display Siemens 840 D TECHNICAL DATA Max. swing diameter: 550 mm Max. turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12 (6 driven) Tool shank size: 40 mm Speed range (2-speed): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT/ACCESSORIES - Full enclosure including work area lighting - Automatic power-operated sliding door Iaedpfx Asvr Tkzof Iel - C axis - Programmable tailstock, incl. various live centers - 12-position drum turret - Turret drive system - Chip conveyor - Coolant system with reinforced pump, approx. 4 bar - Automation interface - Various accessories - 1 pc. Heimbuch clamping collet chuck SK 80, without collets - 1 pc. 3-jaw chuck Schunk Rota NCF 315 - 1 pc. 3-jaw chuck Schunk Rota NCF 250 - 1 pc. 2-jaw chuck Schunk Rota NCF 250 - 1 pc. WTO broaching head - 2 pcs. driven tools CAPTO axial tool - 2 pcs. driven tools CAPTO axial/radial tool - 3 pcs. driven tools CAPTO radial tool - 7 pcs. stationary tool holders - Mounting elements - Documentation