Plokštės gręžimo staklės - Horizontaliosios

UNION KR150

Būklė: beveik kaip naujas (naudotas), Donau Donauflex 135 greita radialinė gręžimo staklė Njdpozgvmqjfx Ahcodb Gamintojas: Donau Tipas: Donauflex 135 Pagaminimo metai: 2020 Būklė: Labai gera, naudota, bet kaip nauja Iš karto pristatoma iš sandėlio.

Gamybos metai: 2018, būklė: paruoštas naudoti (naudotas), Parduodama 2018 m. pilnai renovuota CNC radialinė gręžimo staklės. Darbo sritis X/Y: 1050mm/1800mm, gręžimo pajėgumas plienui: 40mm, ketaus: 50mm, sriegimas: M36-M45, įrankio tvirtinimas: SK40, apsisukimų diapazonas: 15 aps./min–2800 aps./min, išilginis pinolės eiga Z: 200mm, kolonos eiga W: 410mm, stalo tvirtinimo paviršius X/Y: 1800mm/600mm, padavimo greitis: 5 mm/min–2000 mm/min, greitasis padavimas X/Y: 7,5 m/min, valdymas: CNC valdymas. Įrengta 360° pasukama sistema, motorizuotas įrankio tvirtinimas, trijų žandikaulių griebtuvas apvaliems ruošiniams, modernizuotas LCD monitorius, platus įrankių komplektas. Svoris: apie 2900kg, bendri matmenys X/Y/Z: apie 2600mm/1900mm/2950mm. Apžiūra galima susitarus iš anksto. Nodpfx Aey Tn Ntehcodb

Būklė: naudotas, Gamybos metai: 2007, Drilling capacity in steel (diameter): 40 mm Throat depth: 1050 mm Spindle speed: 15 – 2800 rpm Feed range: 0.075 – 0.45 mm/min Dimensions (LxWxH): 2450 x 1300 x 2300 mm Weight: 1500 kg Equipment: • Machine in top condition • Serviced and overhauled by factory customer service in 2026 Machine configuration: • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed control • Infinitely variable quill feed via three-phase servomotor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and travels: Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table min: 70 mm, max: 680 mm Distance spindle nose – floor min: 970 mm, max: 1580 mm Drilling radius: 540 – 1590 mm Work table height: 900 mm Machining performance: Drilling capacity (full) St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity St 60: M36 GG 22: M42 Main spindle drive: AC motor, frequency-controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Max. torque: 250 Nm Constant torque from 15 – 2000 rpm Feed drives: X-axis – AC servomotor: 0.25 kW Y-axis – AC servomotor: 0.25 kW Z-axis – AC servomotor: 4.50 kW W-axis – AC servomotor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feed: 5 – 2000 mm/min Accuracy: Positioning accuracy X-, Y-axis over 1200 mm: ± 0.075 mm Electrical data: Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging), with table 1800 x 600 mm: 2800 kg CNC Control: Axes: 3 (X, Y, Z) Ndsdjy Nd T Hepfx Ahcjb Processor: 32-bit CPU Display: TFT flat screen, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values, unit: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining operation, material-dependent cutting data recommendations Tool management capacity: max. 500 tools Subroutine technology: yes Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: – arbitrarily clamped rectangular parts – arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle position detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Our high-performance sandblasting cabinet "MM 2010" operates using the pressure blasting method and, thanks to its innovative abrasive recycling system, is suitable for all types of blasting media. The integrated bucket elevator, which is firmly connected to the blasting cabinet, allows even the heaviest blasting media—such as stainless steel shot, cast steel, and other metallic abrasives—to be used without issue. Unlike competitor systems, the abrasive is not vacuumed back, but is conveyed via a flat conveyor system to the adjacent bucket elevator. The bucket elevator transports the material upwards and feeds it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed abrasive return and recycling system ensures continuous media supply at all times, independent of the extraction system's suction performance. Thanks to the media return system and innovative fan technology, the blast cabinet has a very low energy requirement (0.75 kW fan motor). Since the abrasive is not vacuumed back, there is no need for an oversized extraction unit with high power consumption, as required by many competing systems. For maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure vessel. This vessel includes a pressure regulator, allowing the blasting pressure to be continuously adjusted from 0.1 to 12 bar. For safe operation, a water separator is permanently installed on the blast vessel to protect the abrasive from moisture. Ndedpfxswc Nrnj Ahceb The blasting nozzle is made of highly wear-resistant boron carbide, enabling service lives of up to 1,000 hours depending on the abrasive used. The blast chamber is lined with wear-resistant rubber, increasing abrasive service life and protecting the cabinet from wear. An air blow-off gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently attached cartridge filter extraction unit ensures optimal visibility in the blast chamber and maximum service life for the blasting media. The dedusting unit features continuous automatic cleaning of the filter cartridges by means of compressed air pulses. This ensures long filter media service life and consistent extraction performance. Loading of the blast chamber is via an angled front flap, which swings fully upwards. This enables loading of the blast cabinet by forklift or crane. The robust work grate can handle loads up to 500 kg. To ensure optimum visibility in the blast chamber, two high-performance and energy-efficient LED lights are mounted on the cabinet roof. Their rooftop installation protects them from dust and wear. The system is operated via a modern touch display. For safe operation, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made from toughened safety glass and feature a protective foil to guard against wear.

Gamybos metai: 2007, būklė: labai geros būklės (naudotas), STENHOJ 18.5 kW Screw Compressor Set STENHOJ S18-10 screw compressor (with COMPAIR screw stage), unit mounted on an air receiver with air dryer, after service. Technical specifications: Njdemx Rvwepfx Ahcjdb - Capacity: 2600 L/min - Motor power: 18.5 kW - Pressure: 10 bar - Operating hours: 1337 h - Year of manufacture: 2007 - The compressor is fully operational. Net price: 15,800 PLN Gross price: 19,434 PLN

Būklė: geras (naudotas), Gamybos metai: 2014, Pasiūlymas 26252 Techniniai duomenys: – Gręžimo našumas į pilną plieną ST 60: 22 mm – Gręžimo našumas GG 25: 32 mm – Sriegių pjovimas ST 60: M 20 – Sriegių pjovimas GG 25: M 24 – Gręžtuvo spindelio tvirtinimas: MK 4 – Gręžtuvo spindelio eiga: 140 mm Nsdpozwftzofx Ahcjdb – 18 gręžtuvo spindelio greičiai: 60–3050 aps./min. – Gręžimo padavimas, reguliuojamas be laiptelių: 0,075–0,15–0,70 mm/aps. – Gręžimo spindulio minimalus / maksimalus dydis: 420 / 1320 mm – Pasukimo kampas: 320° – Stalo dydis: 1200 x 600 mm – Stalo aukštis: 905 mm – Variklio aukščio reguliavimas / gręžtuvo kolonos eiga: 430 mm – Hidraulinė kolonė + atraminio svirties užspaudimo įtaisas – T formos grioveliai, vertikaliai išdėstyti kairėje mašinos pusėje – Aušinimo skysčio sistema – Variklis: 400 V / 1,1 / 1,6 kW – Reikalingas plotas: apytiksliai: plotis 1300 x aukštis 1910 / 2340 x gylis 2700 mm – Svoris: apytiksliai 1800 kg

Būklė: naudotas, Techninės specifikacijos: Stalo ilgis: – mm Ndjdszuzr Iepfx Ahcob Stalo plotis: – mm Stalo apkrova: – t Aukštis: 1250 mm Plotis: 1000 mm Gylis: 800 mm Apytikslis mašinos svoris: 1200 kg Turima 2 vnt. (kaina nurodyta už vienetą) Atitinka DIN 650 standartą: 6 T formos grioveliai Pateikdami užklausą, nurodykite norimo tvirtinimo kampų skaičių. *