PERTVARŲ GALVOS

unbekannt drehbar/schwenkbar

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Gijdpfx Abortd Uwedsl Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Gamybos metai: 1990, Sąlyga: geras (naudotas), CNC 4th Axis Manufacturer: NIKKEN Giodpfx Abjgabu Uedol Model: CNC-200, Year: 1990 Including tailstock and base plate.

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: XD-38II-CP-0703-H, sukimosi skersmuo virš skersinio stumduko: 38 mm, veleno greitis (maks.): 6 500 aps./min, tekėjimo skersmuo: 38 mm, veleno skylė: 39 mm, galia: 7,5 kW (10,20 AG), The machine can be inspected at our premises in Immendingen by prior arrangement. Included in the scope of delivery are the original chip conveyor, as well as a bar feeder from FMB type 3-36 turbo. Gsdpovtmaljfx Abdsil Also included is a Büchele SFB-301 high-pressure unit, 150 bar, with 4 valves.

Sąlyga: naudotas, Gamybos metai: 1988, Grundig valdymas x eiga 700 mm y eiga 500 mm z eiga 400 mm Godpjiqu S Eofx Abdoil Staklių svoris apie 2,8 t +++++ Atkreipkite dėmesį, kad įrenginys yra išmontuotas ir paruoštas pakrovimui. Dėl šios priežasties negalima atlikti demonstracijos su prijungta elektra ar nufilmuoti vaizdo įrašo. Be to, mūsų skelbime yra pačios informatyviausios ir geriausios kokybės nuotraukos. Papildomų nuotraukų atsiųsti negalime. +++++

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Required space: 600 x 450 x 175 mm Weight: approx. 100 kg Gijdpfob Ez R Uex Abdsl

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Mašina modernizuota 2015 m. Maks. gręžimo pajėgumas: 20 mm Įrankio kūgis: 2 MK Sukimosi greitis: 355/710/1400/2800 aps./min Veleno eiga: 100 mm Veleno išsikišimas: 210 mm Veleno galvutės poslinkis: 250 mm Maks. atstumas velenas-stalas: 445 mm Stalo paviršius: 340x280 mm Godpogqukfsfx Abdsil Prisijungimo galia: 1,1 kW Svoris: 0,165 t Reikalinga vieta IxPxA: 0,6 x 0,5 x 1,3 m

Gamybos metai: 1977, Sąlyga: naudotas, Surface grinding machine, Manufacturer: Okamoto, Model: PSG - 63 UA, Year of manufacture: 1977. Magnetic chuck: 600 mm x 300 mm. Gisdeiz Tmkjpfx Abdsl Grinding capacity: Longitudinal 630 mm, Cross 310 mm, Height 350 mm. Ready for operation.

Sąlyga: naujas, Gamybos metai: 2025, Center height: 250 mm Gsdpfsd I A Aujx Abdsil Spindle bore: 82 mm Distance between centers: 2000 mm Swing over bed: 500 mm Swing over gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,950.00 kg Dimensions: 3,132 x 975 x 1,270 mm

Sąlyga: labai geros būklės (naudotas), Pressure: 0.5 – 20 t Workpiece diameter - max.: 5 – 75 mm Thread length: 2000 mm Pitch in mm: 8 mm Rolling spindle holder diameter: 69.85 mm Tool diameter: 200 mm Giodpfx Asvpaa Rjbdjl Rolling spindle speeds: 20 – 90 rpm Stroke: 0 – 20 mm Total connected load: 7.5 kW Machine weight: approx. 3.1 t Space requirements: approx. 1.9 x 1.1 x 1.2 m

Sąlyga: naudotas, Gamybos metai: 2001, Pressure 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system Total power requirement: 29 kW Machine weight approx. 9.5 t Required floor space approx. ... m Quotation We are pleased to offer you—subject to prior sale and errors in technical data—from our stock: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model ROLLEX, Year 2001 Steplessly adjustable rolling force from 0.2 to 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive: approx. 8.5 kW each Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features - The machine is equipped with a modern CNC control system developed by the manufacturer. Gjdpfx Aet Hw N Tjbdeil Allows input of all relevant process and workpiece data, enabling fast and straightforward set-up for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. - Built-in (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device, prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the workpiece front. The stroke of the workpiece slide is approx. 500 mm—so the workpiece is clamped and moves hydraulically between the two rolling tools. - Cooling unit for hydraulic oil, separate electrical cabinet, CNC operating panel, etc. - Transparent safety covers in the working area. Central lubrication.