Užspaudimo plokštės frezavimo atrama

unbekannt 370/140/H53 mm

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Fjdpfxexddvnj Ab Sspb Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Slides Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2013, Sahinler HPK 200 Hydraulische Profil- und Rohrbiegemaschine Wellen- und Schaftdurchmesser: 200 mm Werkzeug- und Walzendurchmesser: 900 mm Arbeitsgeschwindigkeit: 2–5 m/min Motorleistung: 30 kW Biegeleistung x15x4 273x5,6 / 10.000 mm Größter Walzendurchmesser: 9"x6,3 / 4.000 mm Durchmesser Oberwalze: 650 mm Walzenkapazität (Profil) – 3: 200x200x18 / 5.000 mm Fodpjw D Uqxsfx Ab Sjpb Schaftdurchmesser: 200 mm Oberwalze x15 mit Vorbiegen min. 120x120 / 3.000 mm Spannung: 3x400 V Arbeitsgeschwindigkeit: 2–5 m/min Max. Leistungsaufnahme: 30.000 W Höhe: 2.300 mm Länge: 2.400 mm Breite: 3.400 mm Gewicht: 15.000 kg

Sąlyga: geras (naudotas), Gamybos metai: 2009, Manufacturer: BAILEIGH Model: R-H 120 Control: Telemechanique Year of manufacture: 2009 Arm adjustable 330 mm Hydraulic side support Set of universal rolls Set of pipe rolls 88.9 mm Set of pipe rolls 60.3 mm Digital position readout system for side rolls Horizontal & vertical operation possible Specifications Metric / Imperial Horizontal and Vertical Operation Axis Diameter: 100 mm Number of rolls: 3 Horizontal: Yes Vertical: Yes Flat bar capacity: 100 x 240 x 1600 mm Fpjdpfewpkwfox Ab Seb Tube capacity: 139 x 4 x 3000 Ø x mm T-profile capacity: 100 x 100 x 1000 mm Working speed: 0 – 5500 mm/min Side roll adjustment range: 200 Top roll pressing force: 200 bar Side support: Yes, 330 mm stroke Approximate Dimensions Length: 1800 mm Width: 1600 mm Height: 2000 mm Weight: 2300 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith but its accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend you verify all important details for yourself. Share on

Sąlyga: naudotas, rida: 205 880 km, galia: 265 kW (360,30 AG), pirmoji registracija: 05/2008, kuro tipas: dyzelinas, bendras svoris: 32 000 kg, ašių konfigūracija: 8x4, pavaros tipas: mechaninis, emisijos klasė: Euro 4, Gamybos metai: 2008,

Sąlyga: naudotas, Gamybos metai: 2018, Liebherr R 924 SLC Litronic Year of manufacture: 2018 Operating hours: 5,400 Liebherr engine – Tier 4 – EPA compliant Adjustable boom: 4.00 m Stick: 2.70 m Counterweight: 4.8 t SLC undercarriage, track width 2,250 mm Fpedow Rcrvspfx Ab Ssb B60 tracks, 750 mm triple grouser shoes, 50 links Automatic climate control Central automatic lubrication system Premium operator seat Comfort radio Raised hand rests for joysticks Footrest Sun visor Shatterproof roof window Roof window wiper Cabin work lights, front, LED 2,100 lumens, 2 units Cabin work lights, rear, LED 2,100 lumens, 2 units Liebherr bypass filter Diesel refuelling pump Reversing camera Camera for monitoring right-hand side view Return filter for hydraulic hammer Additional handrail for access to the right uppercarriage Access Travel alarm system button on right joystick (switchable) Proportional control, medium pressure circuit (left) / high pressure circuit (right) Control switch for managing the high pressure circuit via proportional control or joystick (switchable) High pressure circuit switchable via pedals or mini-joystick High pressure circuit with tool control Overload warning system Two-piece boom, 4.00 m Stick, 2.70 m Load holding valve for hoist cylinder Load holding valves for boom cylinders Load holding valves for stick cylinder Adjustable rod protector for boom cylinder Work light on boom, right, LED 2,100 lumens, 1 unit Additional work light on boom, left, LED 2,100 lumens, 1 unit Work light guards on boom, right and left Extended central lubrication for connecting link Stick guard Hydraulic quick coupler SWA 48 HD with Likufix

Sąlyga: geras (naudotas), Gamybos metai: 2000, Sunkus tekinimo staklės ERNAULT SOMUA P72 su 3 kreiptuvais skersmuo virš lovos 2200 mm Fpjdpfx Aexq D Tyjb Ssb skersmuo virš suporto 2000 mm sukimosi greitis nuo 1,5 iki 3000 aps./min - 75 AG staklių svoris 39 t galimas svoris 16 t staklės veikia, galima apžiūrėti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, X ašies eiga: 8 000 mm, Y ašies eiga: 3 300 mm, Z ašies eigos atstumas: 1 500 mm, Manufacturer: SORALUCE Model: FS 8000 Control: Heidenhain iTNC 530 Year of manufacture: 2006 ATC chain with 40 positions Maximum tool size: Ø 125 x 400 mm Machine prepped for rotary table installation Chip conveyor Central lubrication Stroke with vertical head swiveled: 3300 mm Specifications Metric | US Standard X-axis: 8000 mm Y-axis: 2800 mm Z-axis: 1500 mm Spindle power: 30 kW Spindle speed: 5000 rpm Tool holder: 50 ISO/BT/MK X-axis feed rate: 15,000 mm/min Y-axis feed rate: 15,000 mm/min Z-axis feed rate: 15,000 mm/min Milling head auto-index: 2.5 x 2.5° Dimensions (approx.): Length: 17,500 mm Width: 4,050 mm Height: 5,020 mm Weight: 38,400 kg Fpedpfsxc Emxjx Ab Sob Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. All information is given in good faith, but accuracy cannot be guaranteed. Therefore, neither representation nor contractual conditions are implied. We recommend verifying all key details.

Sąlyga: naudotas, Gamybos metai: 1998, Maximum turning diameter: 250 mm Maximum turning length: 900 mm Control system: FANUC SERIES 0-T Spindle bore: 75 mm Chuck diameter: 250 mm Spindle speed: 0–3700 rpm Number of gear stages: 2 Fodpfeucgxusx Ab Sspb Number of tool stations: 12 Feed rate X/Z: 15/20 mm/min Quill stroke: 100 mm Quill diameter: 110 mm Taper: MT 4 Coolant tank capacity: 130 l Weight – pallet system: 5,500 kg Bar machining: No Chuck parts machining: Yes Shank: Cylinder shank DIN 69880 / VDI 40 Hydraulic steady rest: Internal diameter 35–160 mm

Sąlyga: naudotas, rida: 168 000 km, galia: 331 kW (450,03 AG), pirmoji registracija: 05/2016, kuro tipas: dyzelinas, bendras svoris: 32 000 kg, stabdžiai: retarderis, pavaros tipas: automatinis, emisijos klasė: Euro 6, Įranga: suodžių filtras,

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 496 003 km, galia: 308,91 kW (420,00 AG), pirmoji registracija: 01/2008, kuro tipas: dyzelinas, ašių konfigūracija: 8x4, pavaros tipas: mechaninis, emisijos klasė: Euro 4, pakaba: plienas, Gamybos metai: 2008,