Padėklų stelažai su sandėliavimo lentynomis

unbekannt 2500/2750/860 mm

Sąlyga: naudotas, Gamybos metai: 2023, veikimo valandos: 45 h, mašinos/transporto priemonės numeris: 202023-078, Multifunctional CAM cutting system using pure waterjet technology – without abrasives (waterjet cutting machine / waterjet system) 2 cutting bridges with 2 cutting heads including Z-axis 1 head with bevel/angle cutting function 1 head for 2D cutting For cutting foam, plastic, technical textiles, and other planar, flexible, non-metallic materials. Lhjdpfx Ajfhgvwoh Isp Maximum pass-through height: 140 mm Cutting area X and Y: 2,850 mm × 2,750 mm Protection class: IP54 Including BFT 40.22 high-pressure pump (Product photo for illustration purposes) The machine is CE-certified.

Sąlyga: naudotas, Rėmas: 6000x1000 mm Skersiniai: 2680x100 mm ir 2700x100 mm Lsdpfx Aepu Amhsh Ijhp Leistuvumas: 800 kg/skyriui Jei reikia lentynų ar priedų kitose komplektacijose ar išpildymuose, kreipkitės į mus. Siūlome platų naujų ir naudotų lentynų bei priedų asortimentą ir mielai padėsime planavimo metu. Papildomi priedai, pvz.: Rėmo, kampo ir atvažiuojamoji apsauga, pravažiavimo apsauga, medžio drožlių plokštės, grotelės, galinis tinklelis, gylio strypai. Pristatymas: Prašome teirautis dėl siuntimo kainos, nurodydami pašto kodą, vietovės pavadinimą bei pageidaujamą prekių kiekį. Kitos paslaugos: Planavimas, lentynų surinkimas/ardymas, supirkimas/pardavimas Techninių duomenų, informacijos ir kainų pakeitimai bei tarpinis pardavimas pasiliekami!

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm Lhsdpfsmhh Dtox Ah Iop - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: Lsdsmhh Dhjpfx Ah Ishp - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Sąlyga: naudotas, Sijos 3.100 mm apie 767 vnt. Sijos 2.800 mm apie 332 vnt. Stovai 1.050 x 7.500 (iki 8.500) mm 22 vnt. Minimalus parduodamas kiekis nuo 30 sijų Lodsuc T Enspfx Ah Ishp Kaina nurodyta už vieną siją Stovai po 85 EUR be PVM Perkant visą kiekį -15% Yra pakrovimo galimybė

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2000, stalo ilgis: 1 000 mm, stalo plotis: 1 000 mm, darbinis slėgis: 3 800 juosta, WJS NC 1313 Easy Cut (Current condition shown in the pictures) - Prepared for two cutting heads (1x pure water) - Control unit will be renewed - Will be sandblasted and newly painted - Pump available as an option - Available 12-16 weeks after order confirmation Special Features: - Maximum of two cutting heads per Z-axis - Customizable according to customer requirements - 12 months or 2,000 operating hours warranty (excluding spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us for your tailored offer! Lhodpfx Ahjnab Rlj Iop

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, lazerio galia: 6 000 W, X ašies eiga: 3 048 mm, Y ašies eiga: 1 524 mm, Z ašies eigos atstumas: 270 mm, ruošinio svoris (maks.): 950 kg, TECHNICAL DETAILS X-axis: 3,048 mm Y-axis: 1,524 mm Z-axis: 270 mm Control: CNC-ALPHA T2.0 Laser power: 6 kW Dynamics Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Positioning accuracy: ± 0.05 mm/m Repeatability: ± 0.05 mm Cutting Cutting gas: Nitrogen Cutting gas: Oxygen Mild steel thickness: 25 mm (depending on cutting gas) Stainless steel thickness: 20 mm (depending on cutting gas) Aluminium thickness: 16 mm (depending on cutting gas) Brass thickness: 12 mm (depending on cutting gas) Cutting Table Number of pallets: 2 Number of motors: 1 Max. table load: 950 kg MACHINE DETAILS Length: 8,900 mm Width/Depth: 2,260 mm Height: 2,220 mm Maximum power consumption: 90 A / 44 kW Total weight: 7,500 kg EQUIPMENT - Frame-welded construction made from carbon steel - Aluminium gantry made from an aerospace-grade alloy with honeycomb structure - Dual-level pallet changer with short changeover times for high productivity - Table equipped with synchronous motor and frequency drive for high positioning and repeat accuracy - Pull-out drawers in the table for cleaning and disposal of small parts and slag - Modular cutting table with easy module replacement for simple maintenance - Manganese steel plates covering the table to protect the internal table structure - Effective fume extraction from the table via 6 individually controlled shut-off valves - 4 fans in the machine roof ensure continuous supply of fresh air; in combination with a powerful extraction system, this provides a clean cutting environment - Programmable automatic lubrication for rack and pinion drive - Servo drive system by ALPHA/WITTENSTEIN or GUDEL - HIWIN/PMI precision linear guides for high accuracy and movement precision - PANASONIC drive motors for high speed and stability - Wireless CNC handheld unit for controlling machine functions such as start/stop, calibration, edge detection, marking, and emergency stop - Industry 4.0 enabled via cloud solution and real-time machine monitoring, remote diagnostics, and maintenance - Three-color machine status indicator with LED and 360° visibility - Cameras for monitoring the cutting area and pallet changer, with monitor Lhjdpfx Aov N Hdish Iop - Machine equipped with HSG P06 laser cutting head - Water chiller with dual circulation cooling system and high cooling capacity - Voltage stabilizer to protect against over- and under-voltage - SICK M4000 safety light curtain for cutting table - Wear parts set including 2 protective glasses, 10 nozzles, and 1 ceramic ring - Machine compliant with CE - Machine documentation in German (electronic format)