T - lošimo stalo

unbekannt 2000X1000MM

Sąlyga: geras (naudotas), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer -Industrial trailer: with single-axle turntable steering -Platform: 2000 x 1000 mm, height 525 mm -Payload: 3000 kg -Tyres: solid rubber -Trailer coupling: for industrial trailer -Dimensions: 3515/1000/H525 mm -Weight: 264 kg Ndodjhubc Eepfx Abajd

Sąlyga: naujas, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over cross slide: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore diameter: Ø 105 mm Spindle speeds: 12 steps (36 - 1600 rpm) Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: - Longitudinal and cross feed - Rapid traverse for longitudinal and cross feed - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (Metric/Inch/Module/DP threads possible) - Quick-change toolpost, Multifix type - 2-axis digital readout (Brand: Sino) - 3-jaw chuck Ø 315 mm, 100 mm bore (Camlock) - 4-jaw chuck Ø 400 mm, 105 mm bore (Camlock) Njdpfxehhm Edo Abaodd - Faceplate Ø 630 mm (Camlock) - Fixed steady rest Ø 120–260 mm - Follow rest Ø 20–80 mm - Coolant system.

Sąlyga: geras (naudotas), Tvirtinimo plokštė, žymėjimo/derinimo plokštė, matavimo plokštė, matavimo stalas, tiesinimo plokštė, žymėjimo plokštė - Tvirtinimo plokštė: tiesinimo plokštė su reguliuojamomis kojomis - Ilgis: 2000 mm - Plotis: 1000 mm - Aukštis: 285 mm Nedpfjxrywqsx Abajdd - Plokštės storis: 35 mm - Reguliuojamos kojos: 4 vnt. 240/240/H590 mm - Transportavimo matmenys: 2000/1000/H525 mm - Svoris: 960 kg

Sąlyga: geras (naudotas), Tvirtinimo plokštė, brėžimo – dažymo plokštė, matavimo plokštė, matavimo stalas, lyginimo plokštė, brėžimo plokštė -Tvirtinimo plokštė: lyginimo plokštė su reguliuojamomis kojelėmis -Ilgis: 2000 mm -Plotis: 1000 mm -Aukštis: 285 mm Ndjdpfsxryv Hex Abaed -Plokštės storis: 30 mm -Reguliuojamos kojelės: 4 vnt. 240/240/H590 mm -Transportavimo matmenys: 2000/1000/H525 mm -Svoris: 960 kg

Sąlyga: naujas, Gamybos metai: 2024, Protec welding turntable with 20,000 kg load capacity. Infinitely variable speed control from 0.05 to 0.35 rpm. Handheld remote control included. Foot pedal remote control available for an additional €390. Nsdpfx Aoid Szkobaodd Height: 700 mm Diameter: 2000 mm

Sąlyga: geras (naudotas), Tvirtinimo plokštė, brėžimo plokštė, matavimo plokštė, matavimo stalas, suvirinimo stalas, tiesinimo plokštė, brėžimo plokštė, tiesinimo stalas -Tvirtinimo plokštė: ant masyvios bazės, su spaustuvu -Tvirtinimo paviršius: 2000 x 1000 mm -Stalo aukštis: 870 mm -Plokštės storis: 120 mm -Spaustuvas: žiotys 100 x 30 mm, spaudimo plotis 160 mm -Transportavimo matmenys: 2280/1000/H1020 mm -Svoris: 1500 kg Nedpfx Asxpfimjbaedd

Sąlyga: geras (naudotas), Tvirtinimo plokštė, brėžimo/plokštuma, matavimo plokštė, matavimo stalas, suvirinimo stalas, tiesinimo plokštė, brėžimo plokštė, tiesinimo stalas - Tvirtinimo plokštė: ant masyvios atramos, su spaustuvu - Tvirtinimo paviršius: 2000 x 1000 mm - Stalo aukštis: 925 mm - Plokštės storis: 115 mm - Spaustuvas: žandikauliai 150 x 30 mm, suspaudimo plotis 250 mm - Transportavimo matmenys: 2480/1000/H1110 mm - Svoris: 1850 kg Ndodpfx Abexm Sageaed

Sąlyga: geras (naudotas), Sukimo įtaisas, 4 ašis, apvali staklių plokštė, apvalus padalijimo stalas, valdomas apvalus stalas, padalų aparatas, padalų galvutė, žiedinis indekso stalas su sukamuoju mova -Gamintojas: Fibro, Fibroplan apvalus stalas su pavara -Tipas: NC1.03.0340.1.1.04.04 -Stalo skersmuo: 340 mm Ndsdpfxohvtcbo Abajd -Tvirtinimas: hidraulinis -Pavara: Indramat servovariklis, tipas 112B-0-LD-4-C/180-A-0/Wi533LX/S011 -Kiekis: 2x apvalūs stalai (1 su pagrindo plokšte) -Kaina: už vienetą -Išmatavimai: 660/640/H550 mm (su pagrindo plokšte) -Svoris: 420 kg (su pagrindo plokšte)/vnt.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Ndsdjfgyicspfx Abasd Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Ndodpeuxfucsfx Abaod Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...