Lazerio šaltinis

Trumpf TruDisk 4002 (4C)

Būklė: naudotas, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser up to 4 kW Model: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with high demands on quality, precision, and automation. The combination of high output, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing no.: 20-10-02-A3* No further testing has been carried out onsite. Operating hours could not be retrieved. The laser was running flawlessly until decommissioning. Technical features: Performance & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies servicing/maintenance Efficient energy & cooling systems: Energy saving modes, active power factor correction, pulse function for reduced consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (inlet temperature up to 38 °C) Reflection-resistant: special resonator design suitable for highly reflective metals Industry 4.0 capable: extensive sensor system & data interfaces for condition monitoring, OPC-UA, predictive maintenance Application possibilities: Scanner & hybrid welding (e.g. car body construction, shipbuilding) High-speed cutting, even of reflective metals Flame cutting & surface processing Cladding, hardening, deep penetration welding for high-precision requirements Technical data: Supply voltage: 380 V (–10%) to 460 V (+10%), 3-phase + PE Frequency: 50 – 60 Hz Power input: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection class: IP 54 Short circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) Pedpfx Acszii Nqeajpw For further questions, please do not hesitate to contact us by phone.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, veikimo valandos: 55 771 h, lazero valandos: 35 157 h, lazerio galia: 3 200 W, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, aliuminio lakšto storis (maks.): 8 mm, stalo ilgis: 3 000 mm, stalo plotis: 1 500 mm, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 150 mm, pozicionavimo greitis: 140 m/min, pozicionavimo tikslumas: 0,02 mm, paskutinio kapitalinio remonto metai: 2024, padavimo ilgis X ašis: 3 000 mm, padavimo eiga Y ašimi: 1 500 mm, padavimo ilgis Z ašis: 150 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, dokumentacija / vadovas, Lazeris veikia, galima apžiūra ir išbandymas. Reguliariai prižiūrėtas, geros techninės būklės. Visi veidrodžiai buvo pakeisti 2024 metais. Pjdpov Hxbbjfx Acaspw

Gamybos metai: 1988, būklė: naudotas, mašinos/transporto priemonės numeris: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Cutting capacity at 90°, round: 130 mm Cutting capacity at 90°, square: 120 x 120 mm Mitre cutting capacity at 45°, round: 130 mm Mitre cutting capacity at 45°, square: 110 x 110 mm Ppodpfx Acjz N Amsaew Cutting speeds: 11 and 22 m/min Feed speeds: 670 mm/min Cut-off length with automatic feed: up to 1200 mm Electrical connection: 380 V, approx. 4 kVA Saw drive: 1.6 / 2.5 kW Space requirement: 1800 x 3800 x 2000 mm Weight: approx. 1800 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 055 - 030.0221, Complete overhaul Year 2003 – Fanuc 16i-T Centre height 175 mm, between centres 650 mm 2 external grinding wheels + fine B-axis Country of manufacture: Switzerland Voltage: 3x400V Dimensions: 3680 x 2165 x 2100 mm Net weight of machine: 5500 kg TECHNICAL SPECIFICATIONS Centre height: 175 mm Between centres: 650 mm LONGITUDINAL SLIDE (Z) Max travel: 800 mm Feed rate: 0.001 – 10,000 mm/min Resolution: 0.0001 mm CROSS SLIDE (X) Max travel: 254 mm / SPW 650 Feed rate: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Maximum workpiece weight (between centres): 80 kg TAILSTOCK Taper: Morse 3 Quill: Ø 50 mm Quill stroke: 35 mm UNIVERSAL GRINDING WHEEL HEADSTOCK Left wheel dimensions: 500 x 80 x 203 mm Right wheel dimensions: 400 x 80 x 203 mm Grinding wheel headstock power: 12.5 kW Rotational speed: 3,200 rpm Programmable cutting speed up to: 50 m/s B-axis stroke: -15° to +195° B-axis indexing accuracy: 0.0001° LEFT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1-1000 rpm C-axis indexing accuracy: 0.001° RIGHT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1-1000 rpm C-axis indexing accuracy: 0.001° Hydraulic feed with pressure control Unless stated otherwise, the technical data provided are not binding and subject to errors or omissions. Stock no. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Fully overhauled: Mechanical, geometry, hydraulics, and electrical parts (checked and/or replaced) Grinding wheel headstock: Disassembled, parts cleaned, worn and defective parts replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced + adjusted. New paintwork. Workhead: Disassembled, parts cleaned, worn and defective parts replaced, motor overhauled, belts replaced. New spindle bearings. New paintwork. Tailstock: Disassembled, checked and overhauled Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic manifold checked. X-axis: Disassembled, worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, tables ground. Z-axis: Disassembled, tables ground, worn and defective parts replaced, hydraulic piston overhauled, new paintwork. Electrical cabinet: Fully checked, various relays replaced. Paintwork: Psdpfx Acezbaz Aeaspw Colours: White RAL 9003 and grey RAL 7011 Geometry adjusted according to manufacturer protocol. Various accessories checked and cleaned.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, Panelių lankstymo staklės Trumpf modelis 7030, pagaminimo metai 2016, įrengtos 2017 m. gegužę, pilnai sukomplektuotas įrenginys su visomis opcijomis, įskaitant ACB lazerinio lenkimo kampą ir Tec Zone programavimo sistemą, galima iš karto. Ppedpfjyw Uggex Acasw

Būklė: labai geros būklės (naudotas), Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, Parduodame šį tekinimo staklę. Prie staklių yra lunetės, papildomas frezavimo prietaisas. Tekinimo ilgis 8000 mm. Skersmuo virš staklių lovio Ø 2020 mm. Skersmuo virš skersinio poslinkio Ø 1600 mm. Veleno pragręžimas 120 mm. Apsisukimai / diapazonai 180 aps./min. Veleno galia 80 kW. Griebtuvo persuktuvo skersmuo Ø 400 mm. Veleno eiga 250 mm. Matmenys: ilgis 15360 mm, plotis 3520 mm, aukštis 2600 mm. Svoris 78000 kg. Staklės yra buvusiose Vitkovice liejyklose Ostravoje, Čekijoje. Staklės prijungtos, galima išbandyti. Galime atsiųsti vaizdo įrašą apie stakles per „WhatsApp“. Pedpox Auwgofx Acaepw

Gamybos metai: 2010, būklė: paruoštas naudoti (naudotas), Parduodama TRUMPF gamintojo CNC lazerinio pjovimo sistema. Lazerio galia: apie 3000 W (3 kW), darbinė sritis: X/Y/Z 3000 mm/1500 mm/115 mm. Papildomai siūlomas ir tinkamas Liftmaster iš 2015 metų, kurį galima įsigyti ir atskirai. Ppsdpfxjxxa Uco Acasw

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4304, sukamosios stalo skersmuo: 600 mm, šlifavimo aukštis: 450 mm, bendras svoris: 14 500 kg, The machine is equipped with 3 spindles: surface grinding, external grinding, and internal (bore) grinding. Turret head B-axis with 1° indexing. Belt filter system included. Podpovt A Rtofx Acaopw

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 - Distance between centers: 400 mm - Usable diameter: 180 mm LINEAR AXES - Travel X1 and X2 x Z: 220 mm - Travel Z: 850 mm - Resolution X x Z: 0.0001 mm TURRET: - Number of fixed positions: 12 - Tool holder: VDI30 GRINDING WHEEL SPINDLE - External grinding right: * Grinding wheel dimensions (Ø x width x bore): 400 x 50 x 127 mm * Drive power: 6.8 kW WORKPIECE SPINDLE HEAD - Max. spindle speed: 7500 rpm - Synchronous speed: 1 - 5000 rpm - Taper type: MT4 - Drive power: 10.5 kW - C-axis: 0.001° SYNCHRONIZED COUNTER SPINDLE - Max. spindle speed: 7500 rpm - Synchronous speed: 1 - 5000 rpm - C-axis: 0.001° - Internal taper: MK4 - Micrometric adjustment: +/- 40 micron - Drive power: 10.5 kW POWER SUPPLY - Power: 45 KVA DIMENSIONS - Space requirement: 2800 x 3960 mm - Machine weight: 7600 kg MACHINE HOURS - Power-on hours: 57,000 h ACCESSORIES - CN FANUC 310i-modelA - StuderWIN software - RS232 / USB interface - External electronic handwheel - Turret with automatic length calibration Renishaw LP2 - Marposs measuring probe for diameter (Multirange) + Z4 axis for positioning - Semi-automatic grinding wheel balancing MPM.3 BMT100 M.24 - Coolant tank 480 L * with paper filter * with magnetic filter Ppodjvxw A Uopfx Acaow - Chip conveyor - Mist extraction unit - Cooling unit for grinding wheel motor - Electronic touch detection Dittel AE6000 - Stationary dressing device at workpiece spindle head - Control cabinet air conditioning - Balancing arbor - Interface for automatic loading system

Būklė: naujas, DM100 ZC – Performs edge rounding and removes sharp burrs on both inner and outer edges of steel, stainless steel, or aluminum parts after laser-cutting, shearing, or punching of metal parts from a minimum size of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) and abrasive belt, removing heavy burrs in the initial step. The second station is equipped with two counter-rotating cross-belts with abrasive blocks, rounding the edges of the entire product, both inside and outside, in a second step. A key advantage is deburring products with surface protection film, as only the edges are processed without damaging the film. Technical data – DM1100 ZC: Working capacity (Ø mm): 1100 x 100 No. of belt stations (Z): 1 Ppedpfjd Hintjx Acaew No. of cross-belt stations: 1 Abrasive belt, dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230 x 2300 x 2250 Weight (kg): 3300