Traub TNS 26 DGY, pagaminimo metai 1992, vidinis Nr. 231415

TRAUB TNS 26 DGY

Sąlyga: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, CNC tekinimo staklės Tornado A90 po remonto 2024 m., įrankių galva VDI30, komplektuojama su strypų padavėju, E173 collet tipo suspaudimo galvute. Staklės veikia, galima apžiūrėti gamyboje. Guedpfxewavqxo Abmsk

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Maximum workpiece length: 500 mm Minimum workpiece length approx.: 5 mm Maximum workpiece length for plunge grinding: 50 mm Maximum grinding diameter without steady rests: 100 mm Maximum diameter: 240 mm Workpiece Swiveling capability: 90° Grinding wheel slide Min./max. swiveling capability: 30° Min./max. cross travel incl. 300 mm rapid traverse: 100 mm Wheel diameter after rotation 1st range: 320 - 400 mm 2nd range: 260 - 320 mm Maximum workpiece weight between centers: 60 kg Maximum workpiece weight in chuck: 20 kg Maximum workpiece weight in faceplate: 20 kg 8 workpiece spindle speeds: 45 - 500 rpm Min./max. swiveling capability: 12° Min./max. longitudinal movement: 2 - 500 mm Gusdpfxswhp D Us Abmok Table travel, stepless: 0.5 - 5 m/min Handwheel infeed: 2 and 20 per revolution

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, veikimo valandos: 46 282 h, greitas poslinkis X ašimi: 15 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 15 m/min, bendras aukštis: 2 600 mm, bendras ilgis: 11 000 mm, bendras plotis: 2 000 mm, bendras svoris: 6 000 kg, valdiklių gamintojas: TRAUB, valdiklio modelis: TX 8F, priešpriešinio veleno didžiausias greitis: 4 000 aps./min, įrankių magazino lizdų skaičius: 10, - Includes two 10-position tool turrets with live tooling stations - Includes HAINBUCH chucking system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission at operator station: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C Godpfjwpa Rusx Abmeuk - Humidity: max. 70% - Workpiece discharge via sub-spindle - Max. sub-spindle speed: 4000 rpm - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input/output resolution: - X/Z: 0.001 mm - C-axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Max. thread pitch: 999.999 mm - Max. radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Spindle speed override: 50…120% - Spindle speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-codes: 3 digits - B-codes: 6 digits - Memory capacity: 32,000 characters - Tool offset pairs: 40 CNC TURNING AND POSITIONING UNIT (C-AXIS): Main spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 minutes Sub-spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 minutes TOOL CARRIERS 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holder/tool carrier positions: 10 (14) - Cylindrical shank per DIN 69880: Ø 30 x 55 (25 x 48) mm - Tool cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Index time per station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z-AXIS): - Max. speed: 4000 rpm - Max. clamping diameter: 65 mm - Infinitely variable 3-phase motor: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw drive: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT SYSTEM: - Per tool carrier: Single-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTE: Due to occasional usage, operating hours may vary slightly.

Sąlyga: paruoštas naudoti (naudotas), veleno skylė: 36 mm, sukimosi skersmuo virš skersinio stumduko: 33 mm, tekėjimo ilgis: 320 mm, Technical data: Main spindle: - Maximum turning diameter: 33 mm - Maximum speed: 8,000 rpm - Drive power: 5.5 kW - Drive power at 60% duty cycle: 7.5 kW Slide 1: - Z1 slide travel: 320 mm - X1 slide travel: 50 mm - Y1 slide travel: 255 mm - Rapid traverse speed: 30 m/min - Ball screw diameter: 25 mm Tool slide 1: - Number of tools Stationary with 16 x 16 shank: 5 tools Slide 2: - X2 slide travel: 165 mm - Z2 slide travel: 200 mm - Rapid traverse speed: 30 m/min - Ball screw diameter: 30 mm Gujdpfx Abjw Rcd Eemjk Tool slide 2: - Number of turret stations with integrated spindle: 8 units - Number of axial driven tools (integrated): 8 units Coolant tank, approx.: 400 litres Coolant pump, maximum output: 80 l/min Dimensions (LxWxH), approx.: 2,460 x 1,510 x 1,750 mm Equipment: - Fanuc iT CNC control - Workpiece discharge system - IEMCA bar loading magazine - 5-position tool holder plate for slide 1 - Electrical and software interface for bar loading magazine - Drill holder for main spindle and pick-up spindle - 2 double drill holders for rear machining support with cylinder - Workpiece pusher for pick-up spindle

Gamybos metai: 2011, Sąlyga: paruoštas naudoti (naudotas), A CNC double-spindle precision lathe from Benzinger is available. Travel range X1/Z1/Z2: 310mm/160mm/80mm, rapid traverse X/Z: 30m/min, feed force X/Z: 4000N, max. tool length: 60mm, machine dimensions X/Y/Z: approx. 2200mm/1350mm/1850mm, weight: approx. 2250kg, control unit: Siemens Sinumerik 828D. Includes LNS Express-220 bar feeder and Kraft & Bauer FB 703 fire extinguishing system. Documentation is available. On-site inspection possible. Gsdpeww Iuqefx Abmouk

Sąlyga: geras (naudotas), Gamybos metai: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control system: TRAUB TX Location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Spindle speed: 8000 rpm X-axis travel: 450 mm Turning length: 450 mm Spindle speeds: 4000 rpm Clamping diameter: 42 / 65 mm Spindle diameter at front bearing: 110 mm Tool mount: 14 Max. torque: 170 / 230 Nm Rapid traverse speed X-axis: 15 m/min Rapid traverse speed Y-axis: 6 m/min Rapid traverse speed Z-axis: 30 m/min Space requirement (LxWxH): 4354 x 2076 x 1917 mm Tool slide cross-section, turning and milling support: 16 x16 (20 x20) mm Pressure: 70 bar Hydraulic tank capacity: 70 l Total power requirement: 39 kVA Approx. machine weight: 5.2 t Feed force X-axis at 100% duty cycle: 5000 N X-axis feed travel: 140 mm Z-axis feed travel: 450 mm Gjdpfx Asx A R U Ujbmsuk Y-axis feed travel: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Additional Information: - Turret 1, number of stations: 10 - Turret 2, number of stations: 14 - Hecowpkfie Htlx Tfefh - Driven tools: Yes