* FRONIUS TPS 4000 ROBOTŲ RINKINYS VR 1500 *

TRANS PULSE SYNERGIC KUKA ABB YASHKAWA PULS 400 A Fronius Generalüberholt

Gamybos metai: 1997, Sąlyga: paruoštas naudoti (naudotas), Turning diameter: 200 mm, turning length: 400 mm, swing diameter: 420 mm, bar capacity: 60 mm, max. chuck diameter: 160 mm, spindle speed: 5,000 rpm, turrets: 2, stations: 2x14, rapid traverse X/Z: 20 m/min / 30 m/min. Machine dimensions X/Y/Z: approx. 7,500 mm / 2,100 mm / 2,100 mm, weight: approx. 4,500 kg. Documentation available. On-site inspection possible. Lhsdju T Rgkspfx Ah Tjp

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: IRB6640-235/2.55 IRC5, keliamoji galia: 235 kg, rankos pasiekiamumas: 2 550 mm, valdiklių gamintojas: ABB, valdiklio modelis: IRC5, teach pendant gamintojas: ABB, Įranga: dokumentacija / vadovas, IRS Robotics® Restauruotas pramoninis robotas Komplekte su mūsų garantija ir mūsų vidaus robotikos inžinierių atlikta detalia 77 punktų patikra. Lhedpsp T Uz Eofx Ah Tsp Markė: ABB Tipas: IRB6640-235/2.55 Valdiklis: IRC5 Keliamoji galia: 235 kg Pasiekiamumas: 2,55 m Bendros paskirties: Didelės apkrovos, montuojamas ant grindų Roboto masė: apie 1400 kg Pasirinktinai: Galime pristatyti robotą su ABB IRBT6004 bėgiu (iki 32 metrų, jei reikia). Komplektacija su 7-osios ašies pavaros moduliu valdiklyje, varikliu, kabelių grandine, tepalų siurbliu, visiškai veikianti ir paruošta darbui. IRS Robotics® restauruotas: 77 punktų protokolas – visiškai patikrintas mūsų bandymų stenduose, naujas alyva/tepalas, nauji akumuliatoriai, kruopščiai išvalytas, perdažytas pasirinkta RAL spalva. Įtraukta tikslumo būklės matavimai (kartojamumas, tikslumas, laisvumas). Apie mus: Esame patikimi naudotų A-prekės ženklų robotų tiekėjai: ABB – KUKA – ABB – YASKAWA. Nuo 2002 metų. Pristatome visame pasaulyje.

Sąlyga: naujas, Cutting diameter: 240 mm Saw blade dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangle: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangle: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Ledpfx Asd Iip Ssh Tohp Total power requirement: 1.2 kW Machine weight: approx. 0.26 t Space requirement: approx. 0.9 x 1.6 x 1.74 m • Mitre cut left 60° • Quick-action vice with quick-clamping device • Quick-release lever for easy operation • Frame and gearbox cast in one piece, very quiet cut and low vibration • Electronic monitoring of blade tension and blade breakage, saw blade cover • Carbide saw blade guides • Large machine bed • Machine base (supplied disassembled) with automatic coolant system The AutoCut system consists of: Hydraulic cylinder, feed control, spring package, limit switch Automatic saw frame lowering via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut. Rapid traverse lowering of the saw frame from rest position to the workpiece, then switching to normal sawing feed (e.g. for scribing). Manual operation: The hydraulic cylinder acts as a brake cylinder (e.g. for notching). The brake cylinder allows the saw to be positioned at any point during the return stroke.

Sąlyga: naudotas, Gamybos metai: 2006, CNC Heidenhain TNC530 X/Y/Z travel: 1,500/800/1,000 mm Swivel axis: 0-180° A-axis C-axis B-axis Max. workpiece weight: 1,500 kg Machine weight: 18,000 kg Ledpfxswutxis Ah Tehp

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Initial commissioning: 2013 Control system: Heidenhain iTNC 530 incl. HR 520 handwheel Machine Hours Power-on hours: approx. 40,700 h Spindle hours: approx. 17,100 h Current milling spindle hours: approx. 150 h Travel X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-Axis Milling Head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear Axis Drives Feedrate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Lhedpfxewa T Hks Ah Tjp The machine is currently set to the following basic parameters due to insufficient available power supply on site! Feedrate X/Y-axis: up to 40 m/min Feedrate Z-axis: up to 30 m/min Axis acceleration X/Y/Z-axis: up to 2.5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A The machine can be reset to its original values at any time provided adequate power supply is available. Reduced connection values: Connected load: 130 kVA Main fuse: approx. 250 A Dimensions, Weight Space requirement incl. peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Guarding, gantry, control cabinet: RAL 7035 light grey Milling head and attachments: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system by LTA Optionally at extra cost: - Renishaw RMP60 radio touch probe - BLUM Control NT Machine condition Fully operational, in very good condition. Already dismantled and stored.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Sunthinks SC860 Single-Pass Digitaldrucker für Karton / One-Pass-Drucker für Kartonagen, Pizzakartons usw., mit automatischem Einzug. Ausgestattet mit 4 Druckköpfen und einer maximalen Druckbreite von 860 mm; die maximale Materialbreite beträgt 2000 mm, die Drucklänge ist technisch unbegrenzt. Im Lieferumfang sind 4 neue, ungenutzte Druckköpfe enthalten. Lhedpfouix Dvex Ah Tjp * Ein Transport kann von uns organisiert werden.

Sąlyga: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 300 mm, sukimosi skersmuo virš skersinio stumduko: 20 mm, tekėjimo skersmuo: 20 mm, veleno greitis (min.): 10 000 aps./min, veleno greitis (maks.): 10 000 aps./min, veleno skylė: 20 mm, sukimosi greitis (maks.): 10 000 aps./min, galia: 30 kW (40,79 AG), Centrum tokarsko-frezarskie kompletne z podajnikiem prętów LNS HYDROBAR MINI SPRINT (maksymalna długość pręta 3 000 mm) DMG MORI SPRINT 20-8 Sterowanie: Fanuc 310i Główny wrzecion Obroty: 10 000 obr./min Moc: 5,5 kW Moment obrotowy: 14 Nm Przelot pręta: max. 20 mm Oś C1: 0,001 Przesuw osi Z1: 80 mm Wrzeciono przeciwległe Obroty: 10 000 obr./min Moc: 5,5 kW Moment obrotowy: 14 Nm Oś C2: 0,001 Przesuw osi X2 / Z2: 240 / 300 mm Posuw szybki osi X2 / Z2: 40 m/min Nośnik narzędzi I (X/Y) Technologia: suwak liniowy Obróbka wewnętrzna: 6 stanowisk Uchwyt narzędzia: 20 mm Obróbka zewnętrzna: 6 stanowisk Uchwyt narzędzia: 12 x 12 mm Stanowiska narzędzi napędzanych: 5 Napęd narzędzi: 3 450 / 6 000 obr./min Uchwyt narzędzia: tuleja zaciskowa ESX 16 Przesuw osi X/Y: 50 / 350 mm Posuw szybki osi X/Y: 40 / 30 m/min Nośnik narzędzi II (Y) Technologia: suwak liniowy Obróbka wewnętrzna: 4 stanowiska Uchwyt narzędzia: 20 mm Obróbka zewnętrzna: 4 stanowiska Uchwyt narzędzia: 12 x 12 mm Stanowiska narzędzi napędzanych: 5 Napęd narzędzi: 3 450 / 6 000 obr./min Uchwyt narzędzia: tuleja zaciskowa ESX 16 Przesuw osi Y2: 120 mm Posuw szybki osi Y2: 40 m/min DANE TECHNICZNE Waga: 4 200 kg Pobór mocy: 30 kVA Napięcie robocze: 400 V / 50 Hz WYPOSAŻENIE Lhedeq Nmm Espfx Ah Tjp Odprowadzanie wiórów: transporter wiórów System chłodzenia: pompa chłodziwa System gaśniczy: Kraft + Bauer Odciąg mgły olejowej: przygotowane przyłącze Dodatkowe wyposażenie: lampa sygnalizacyjna

Sąlyga: naujas, Gamybos metai: 2018, For sale is an unused Rösler FKS 35 Tandem with acoustic enclosure, manufactured in 2018. The system remains in its original packaging and is available from our warehouse. You are welcome to arrange an on-site inspection appointment by phone in advance. Lhedpfol D Ex Djx Ah Tsp

Sąlyga: naujas, Pressure 28 t Stroke 180 mm Table size 300 x 550 mm Piston diameter 130 mm Working speed min. 2 m/sec Working speed max. 9.8 m/sec Return speed 20 mm/sec Lhsdogvkmropfx Ah Tep Maximum pressure 200 bar Machine weight approx. 0.65 t Total power requirement 4 kW Space requirement approx. 1.15 x 0.75 x 1.1 m • The horizontal bending and straightening press from Profi Press is a versatile hydraulic press, specifically designed for bending, profiling and straightening applications. The machine’s possible uses depend on the accessories mounted on the work table, the tool holder, and in the bores and pin holes. • The HB-28 model is equipped for light bending operations on the work table with an angle scale, and the press can also be supplied with tools (such as block punches) for mounting on the tool holder, as well as tools for installation in the bores and pin holes to perform a variety of tasks. • The hydraulic system can be adjusted via pressure and flow control valves, which regulate the pressing force and speed of the press. The press is equipped with a built-in pressure gauge. • The control panel is used to operate and display the piston stroke and to select between manual or automatic operation. The HB-28 model is also equipped with integrated memory for up to 4 different programs. • Operation is via electric foot pedals.

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) Lhodpfod Nl E Usx Ah Tep The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement