Apdirbimo priedai TOS - HUR 50

TOS HUR 50

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Duodpouuz Iiefx Ab Sel Control: Charmilles Millenium Travel paths (X / Y / Z): 800 x 550 x 510 mm Travel paths (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3,000 kg Cutting speed up to 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total system weight: 6,300 kg Upon receipt of order, the machine will be cleaned, fully overhauled, and tested for all functions by us. Options: - Commissioning of the machine at your site - On-site training - Chiller unit - Transport - Clamping rail set

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM group 2M Operating voltage 400 V Dusdpevx E Ncsfx Ab Sjl Control voltage 230 V Flange width 300 mm Immediately available from stock

Sąlyga: naudotas,

Gamybos metai: 1971, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 713406, -KOM 105- Offered here is a high-performance industrial grinding machine from Kehren & Co, equipped with a paper band filtration system from FAUDI. This is a segment grinding machine with vertical grinding spindle. The machine is fitted with 2 grinding tables/magnetic chucks for pendulum processing. Technical specifications: Segment Grinding Machine: Manufacturer: Kehren & Co Model: D7B Year of manufacture: 1971 Serial no.: 713406 2 grinding tables/magnetic chucks, each with 700 mm diameter Grinding method: segment grinding Control: Marposs Weight: 6,600 kg Paper Band Filtration System: Manufacturer: Faudi - Filtersysteme Dodpfx Abeg Nt A Eo Sjul Model: AFB 1.3 / 1001 Year of manufacture: 1992

Sąlyga: naudotas, Arbeitslänge: 5.500 mm Blechstärke: 13 mm Technische Merkmale: * 3-Walzen-Betrieb Dujdpfx Abj Dvlij Sel * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Halter links/rechts * Hydraulischer Hubturm * Hydraulische Vorbiegung

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, Maschinentyp: CNC-Rundschleifmaschine Hersteller: Fritz Studer AG Modell: S22 Baujahr: 2010 Steuerungssystem: FANUC 31i-A CNC Maschinenbett: Granitan® S103 Mineralguss Ausführung: Fester Geradschleifkopf für Außenrundschleifen (Außendurchmesser) Automatisierung: Automatisches Beladesystem mit Integration eines FANUC-Roboters Spitzenweite: 650 mm Spitzenhöhe: 175 mm Max. Werkstückgewicht: 150 kg Max. Werkstücklänge: 700 mm Max. Werkstückdurchmesser: 449 mm Schleifscheibendurchmesser: 610 mm Schleifscheibenbreite: 160 mm Schleifscheibendrehzahl: Bis zu 3.200 min⁻¹ Spindelleistung: 15 kW Schleifkopf: Feste, gerade Ausführung Dsdpfx Aowl Uvksb Sjul Verfahrweg X-Achse: 310 mm Verfahrweg Z-Achse: 850 mm Max. Eilgang X-Achse: 15.000 mm/min Max. Eilgang Z-Achse: 30.000 mm/min C-Achse: Vollständige Rundumdrehung des Werkstückkopfes Programmieroberfläche: StuderWIN mit FANUC 31i-A Zusatzsoftware: StuderGRIND Automatisierungsschnittstellen: Standard-Schnittstellen für Lader und Peripheriegeräte Weitere Ausstattung: Abrichtgerät (Rotationsabrichter), Heidenhain-Maßstäbe, diverse Spannmittel

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Slides Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Duedpfxsxddvns Ab Sjl Special Equipment Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Sąlyga: geras (naudotas), Gamybos metai: 2008, 1 naudotas vertikalus apdirbimo centras Gamintojas: Deckel Maho Modelis: DMU 80 monoblock Pagaminimo metai: 2008 Valdiklis: ITNC 530 Techninės detalės X eiga: 980 mm Y eiga: 630 mm Z eiga: 630 mm Valdiklis: iTNC 530 Bendras galios poreikis: 10 / 15 kW Staklių svoris apie: 9,5 t Užimamas plotas apie: 4*4*2,5 m Papildoma informacija Komplektacija: Elektroninis rankenėlė Veikimo režimas 4 Rankinis pasukamas frezavimo galva Variklio velenas 12.000 aps./min Dedoxa Eudopfx Ab Sjul SK 40 / prispaudimas DIN 69872 32 padėčių įrankių magazinas Stacionarus stalas 1250 x 700 mm Drožlių transporteris Aušinimo sistema

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Technical Specifications: Working length: 4300 mm Distance between uprights: 3230 mm Pressing force: 400 tons CNC control: AMADA AMNC Number of controlled axes: 5 CNC crowning Stroke: 350 mm Dsdpfewl U Rhjx Ab Seul Throat depth: 420 mm Installation height: 620 mm Motor power: 38.5 kW Laser safety system: FIESSLER Table height: 960 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 29.5 tons Condition: Very good condition, approximately 30,000 operating hours The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Sąlyga: naudotas, Gamybos metai: 2000, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm CNC control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter at front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Djdju Ixwiepfx Ab Ssul Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill taper: MK4 Tailstock stroke: 500 mm (travel) Main spindle power: 7.5 kW (100% duty cycle = 11 kW) Electrical configuration – voltage/frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe is equipped with a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders are installed in the magazine, 4 of which are collet holders Coolant system, coolant supply through turret Control cabinet with cooling, Rittal Type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool as per description.