Cilindrinė šlifavimo mašina

TOS BUA 20 K (2230)

Būklė: geras (naudotas), Šlifavimo skersmuo: 450 mm Šlifavimo ilgis: 600 mm Centru aukštis: 140 mm Detalės skersmuo: 280 mm Veleno greitis: 63–400 aps./min Šlifavimo disko greitis: 20–35 m/s Užimamas plotas: apie 2,4 x 1,9 x 2,1 m Ši apvalioji šlifavimo staklė yra geros būklės, iš karto prieinama ir galima apžiūrėti sujungus prie elektros pas tiekėją. APRAŠYMAS: - Vidaus šlifavimo įrenginys - Aušinimo skysčio agregatas Gsdpfx Afjxcblqo Djua - Automatinės pastūmos Centru atstumas: - 430 mm su tvirtinimo įvore ir reguliuojama griebtuva - 600 mm iki kūgio tvirtinimo be griebtuvo

Būklė: naudotas, Gamybos metai: 2004, Spaudimas: 80 t Lenkimo ilgis: 2550 mm Stovų atstumas: 2050 mm Presavimo sijų eiga: 350 mm Tarpas tarp viršutinio ir apatinio sijų: 620 mm C tipo išpjova: 420 mm X1+X2 ašių eiga per CNC programuojama: 700 mm Z1+Z2 ašių eiga per CNC programuojama: 0-2000 mm R ašies eiga per CNC programuojama: 200 mm Pristatymo greitis: 100 mm/sek Lenkimo greitis: 0-10 mm/sek Atidarymo greitis: 100 mm/sek Darbo valandos: 24000 h Ilgis: 3380 mm Plotis: 1800 mm Aukštis: 2750 mm Svoris: 6100 kg Gjdsxyzzaspfx Af Deua Bendras energijos poreikis: 9 kW Užimamas plotas apytiksliai: 3x2x2,5 m Visus įrenginius galima apžiūrėti bet kuriuo metu, esant įtampai. Demonstruoti įrangą galima bet kada.

Būklė: labai geros būklės (naudotas), padavimo ilgis X ašis: 450 mm, padavimo eiga Y ašimi: 300 mm, padavimo ilgis Z ašis: 300 mm,

Būklė: naudotas, Gamybos metai: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Center distance: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm stepless across 8 ranges Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total connected load: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for reverse turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitch). Reverse turning and relief grinding is possible from the front side, the rear side, and in the axial direction of the machine. Main drive via 8-step manual gearbox. Feed gearbox designed as 12-step manual gearbox. Rear slide swiveling range = 360° Cross slide swiveling range = 360° Chuck is a taper disc Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm Measuring system ARBAH-L 3+1 Frequency inverter FRENIC 5000G11 Godpfx Afovbhv Re Deua 3-jaw chuck Ø 250 mm In stock. *

Būklė: geras (naudotas), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation Gsdpfxsd Tx Ahe Af Djua

Gamybos metai: 1976, būklė: geras (naudotas), Strip width: 300 - 1,350 mm Gedpjbh Ubwefx Af Dsua Strip thickness: 0.35 - 3 mm Coil weight: 12.5 t Mandrel Ø: 508 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Heidenhain iTNC 530 valdymas X/Y/Z eiga: 1200 x 900 x 500 mm Veleno greitis 16 000 min-1 Įrankių magazinas 30 įrankių + papildomas magazinas 57 įrankiams, HSK-A 63 Gedpfsynw Erox Af Deua IKZ 40 bar Drožlių transporteris Heidenhain matavimo jutiklis Blum lazerinė sistema

Gamybos metai: 1991, būklė: paruoštas naudoti (naudotas), Axes: 5, max. grinding wheel diameter: 150 mm, spindle speed: 9,000 rpm, workpiece spindle speed: 1,500 rpm, clamping spindle speed: 13,000 rpm, travel X/Y/Z: 200 mm/190 mm/150 mm, tool holder: HSK-50. Machine dimensions X/Y/Z: approx. 1,700 mm/1,400 mm/1,800 mm, control: NumRoto 1060. Control unit defective. Includes coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection possible. Gjdpjvu Dfbofx Af Doua

Būklė: geras (naudotas), Gamybos metai: 1988, šlifavimo ilgis: 1 000 mm, šlifavimo plotis: 550 mm, šlifavimo aukštis: 400 mm, šlifavimo disko skersmuo: 400 mm, šlifavimo ratuko plotis: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Electronic straight dressing device with compensation Vertical digital readout Mounting for grinding wheel max. 400 x 100 x 127 mm Gjdpfxeu Rqynj Af Deua Spindle motor 7.5 kW 1435 rpm Wedge-shaped leveling pads Coolant system with universal paper band filter Complete documentation

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany Gusdpeqt Dmysfx Af Dsa - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.