BB10 becentrinė šlifavimo staklė

TOS BB10

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 690 mm, veleno skylė: 150 mm, tekėjimo skersmuo: 1 040 mm, tekinimo skersmuo virš viršutinio vežimo: 690 mm, centro aukštis: 500 mm, plotis centre: 2 000 mm, veleno greitis (maks.): 5 000 aps./min, X ašies eiga: 160 mm, Z ašies eigos atstumas: 380 mm, strypo praėjimas: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross slide: 690 mm Over bed: 1,040 mm In gap: 1,070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of faceplate: 320 mm CARRIAGE Bed guide length: 1,020 mm Cross slide travel: 640 mm Top slide travel: 360 mm SPINDLE Spindle nose: ASA 15'' Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing diameter NNU: 190/260/69 mm Internal Morse taper in reduction bush: No. 6 Spindle speeds: 24 Speed range: 4–800 rpm THREAD CUTTING Number of thread types: 398 Metric threads: 0.5–224 mm Module threads: mod. 0.25–11 Whitworth threads: tpi 56–1/8 Diametral pitch (DP): 112–1/4 FEEDS Number of feeds: 108 Longitudinal, cross, and top slide feeds: 0.05–22.4 mm/rev RAPID TRAVERSE Longitudinal, cross, and top slide rapid traverse: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Kodjyhhuwjpfx Am Tjlt Steady rest passage over bed: 140–500 mm Steady rest passage over carriage: 40–350 mm ADMISSIBLE WEIGHT Overhung: approx. 1,500 kg Between centres without steady rest: approx. 5,000 kg Between centres with steady rest: approx. 6,000 kg Machine weight: approx. 7,800 kg

Būklė: naudotas, Wheel diameter – max. 180 mm Kjdpfx Astycg Ssm Tjlt Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Stroke rate 355 – 630 strokes/min Feed range 0.008 – 0.4 mm/stroke Required space approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg With rack cutting attachment Change gear set Year of manufacture: approx. 1981

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2021, veleno greitis (maks.): 4 000 aps./min, X ašies eiga: 450 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 960 mm, ašių skaičius: 5, Šis 5 ašių Mazak INTEGREX J-200 S buvo pagamintas 2021 m. Jo didžiausias apdirbimo skersmuo - 500 mm, X ašies eiga - 450 mm, Y ašies eiga - 200 mm, o Z ašies eiga - 960 mm. Staklėse įrengtas 36 įrankių žurnalas, o didžiausias suklio sukimosi greitis - 4 000 aps/min. Jei ieškote aukštos kokybės frezavimo-apvertimo galimybių, apsvarstykite mūsų parduodamas "Mazak INTEGREX J-200 S" stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Kontrolė: Sklandus G • Atstumas tarp velenų: 1000 + 440 mm Kljdpoyxc N Ejfx Am Tot • Didžiausias apdirbimo skersmuo: 500 mm • Suklio tvirtinimas: A2-6 • Didžiausia strypo talpa: 65 mm • Suklio anga: 76 mm • Įrankių laikiklis: Įrankiai: 36 Capto Papildoma įranga • Medienos drožlių transporteris: "Mayfran" juostos tipo

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t Kljdpfx Amst Hww Dj Tet LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: naudotas, Eccentric Punching Press HAULICK + ROOS Type RVD 125 Double Column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column gap: 900 mm Side column spacing: 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Shut height as shown: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double connecting rod drive with 4-point eccentric shaft bearing for off-center ram force absorption - Free-standing electrical cabinet - NC roller feeder EBU, width 250 mm, year 2003 - Separate control panel for roller feed unit - Coil direction from left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons Klsdshlnzkjpfx Am Tst

Būklė: geras (naudotas), Gamybos metai: 2000, CNC Surface and Profile Grinding Machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electro-magnetic chuck with continuous transverse pole division 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine base tray. Kjdpfxjfrbcks Am Tolt Complete machine documentation available.

Būklė: naudotas, mašinos/transporto priemonės numeris: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Kodpfeb Ez R Usx Am Tjlt Overall height: 175 mm Required space: 600 x 450 x 175 mm Weight: approx. 100 kg

Būklė: geras (naudotas), Gamybos metai: 2011, Ref. Nr.: 10622 Gamintojas: BLANSKO Tipas: SKD 50 Pagaminimo metai: 2011 Valdymo tipas: CNC Valdiklis: SIEMENS SINUMERIK 840 D Kjdpfx Ajym Nfzem Telt Sandėliavimo vieta: Halberstadt Kilmės šalis: Vokietija Z - eiga: 1950 mm Sukimo aukštis: 4130 mm Plokštės skersmuo: 4770 mm Apdirbimo skersmuo: 5300 mm Maksimali apkrova ant plokštės: 100000 kg Skersinio balkio eiga: 3600 mm Skersinio balkio judėjimo greitis: 500 mm/min Papildoma informacija: Pick-up įrankių žurnalas: - 8 įrankių laikiklių vietos - Automatinis įrankio laikiklio prispaudimas stūmoklyje - 1 tiesi gręžimo galva - 1 kampinė galva, 90° (ne pick-up žurnale) - 1 žandikaulių komplektas Mašina galima apžiūrėti prijungtą prie elektros.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Travel path: 205 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 1° TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm COUNTER OPERATIONS Kedpfxouwd Ryj Am Tslt - Number of positions: 5 - Number of driven positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 2,269 x 1,160 mm - Machine height: 1,693 mm - Machine weight: 1,800 kg EQUIPMENT - Control: Mitsubishi MELDAS - Driven guide bushing - Parts catcher - Parts ejector - Coolant tank - Bar feeder: LNS Hydrobar Express 332 - Fire extinguishing system* NB: Functionality not guaranteed. Must be checked by a qualified company appointed by the buyer.

Gamybos metai: 1993, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Klsdpfx Aocc D Ddom Tet Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.